I am having this perception, because based on my driving pattern, none of the other cars I have exhibit such alarming needs for parts replacement.

I am running about 60K++ km per year, along roughly the same road, same passenger. So my wear and tear should be same regardless of what car I use.

But how come my old Kelisa, MyVI and VIOS can be so reliable, yet with Almera I have to go to workshop to repair some stuff on monthly basis Mind you, the Kelisa, MyVI and VIOS is running on bone crushing low profile, while Almera is on stock thick donuts.

But everything seems normal
Wear and tear wor.. U expect all the parts to
Last ur vehicle lifetime is it?

Besides it is affected by ur driving habit also.. If u keep hitting pothole/bump frequently or at a fast speed, u dont expect those parts to last especially the suspension.

Btw, the bearing problem is common among almera.

your wheel bearing did not fail, it simply didnt last

since you let me know it's a notorious issue among Almeras, i can suggest you claim it with service centre while u can

low quality wheel bearing issue might originate from one of Tan Chong's vendors, if u make it known to Tan Chong management, they might improve their process and hence change vendor, or the vendor might improve the bearing quality

brake rotors warp for a variety of reason, sometimes even driving style could have caused it, but most importantly you must know that wheel bearing that has worn out can cause brake rotors to warp, so you see, a faulty component might damage another component

however can you tell me if the Almera wheel bearing issue is only experienced by local Almera drivers or it affects Almera drivers abroad too?

then we can tell if this is due to Tan Chong Nissan Malaysia or Nissan Motor

maybe things like this happen due to cheapest model.. coz hardly heard so many small problems from Grand Livina, X-trail etc..

hahahahahahahhahahaa

+1 sin

I'm done with you.

Looks like I am not alone here.

Petition

Ya, Tan Chong parts are pretty bad, even on new cars. Tan Chong hold a monopoly on Nissan here so they take advantage. In my case (X-Trail) I've found that non-Tan Chong parts to be of equal quality, without having to pay for the Nissan name.
You can also buy parts direct from Nissan Japan from certain spare part shops but it's very expensive. I'm told this is what the government does for their Nissan cars.

Just sharing my owned experienced, I got 2 Nissan cars at home, the first one is Latio and almost 10 years old, very reliable car and so far I'm only changed rear absorber x1 time and cooling coil x1 in 10 years. This made me so confident on Nissan product and decided to buy Almera for my wife even never consider for other brand. After drove Almera nearly for 6 months, i'm really disappointed, i'm having bearing, radiator, aircon issues and continue non stop. From now onward, no more Nissan in the future.

Nissan cars are the worst Japanese car, not sure if its TanChong or Nissan Japan.

My family Xtrail since day 1 got wheel bearing problem also, after change the bearing they blame the tyre. Even after tyre changed to Michelin also problem doesnt go away and TanChong happily tell us its normal. There is loud humming sound coming from the rear since Day 1.

All sorts of other problem like suspension, absorber, bushes, engine mounting which all had been replaced while the car only done 90k and its 2011 car.


My Honda City 2012 still running strong even with all sorts of abuse, yet to change any parts mention above and milleage is reaching 100k.

Agreed. The reason I buy Almera is also because of Latio. Such a great experience with Latio (not mine) plus all the good experience with older Nissan I straight away buy Almera when launched.

Manatau....

No more TAN CHONG Nissan in the future!

This post has been edited by a_dot_el: Aug 26 2016, 02:07 PM

I think it is problem with Tan Chong and not Nissan in general.

I don't really read much problem with Nissan cars overseas. Even in Thai and Singapore forum.

Even Almera is getting good reviews in Thailand and Singapore. Also, they get the proper Nissan famous CVT gearbox while in Malaysia we are getting shortchanged with 4AT. Tan Chong's reason is that Malaysia doesn't want CVT, but I think the real reason is due to Tan Chong wanting to save money by giving us low tech stuff while charging the same. Very typical Chinaman company attitude.

All those problematic parts, are usually local parts, meaning Tan Chong DELIBERATELY choose lower quality components. In makes the car profit margin higher, and they can continue to earn replacement parts money from you after the warranty is over.

Have you read about so many Nissan Sylphy failed engine mounting less than 100k km?!

Also, do you notice, only Tan Chong has short warranty period, 3 years or 100,000 km whichever comes first. Others already starts to give 5 years or unlimited millage warranty. This shows that Tan Chong DELIBERATELY uses low quality parts and knows that it won't last long, even they themselves don't have the confidence in their product.

Even the new Honda City was launched with 5 years warranty.

The PJ service center is just a big conman. Before warranty period over, they tried to adjust or repair any "faulty" parts. Right after warranty over, everything they ask you to change.

Before this my exhaust got rattling noise, so I go to Tan Chong. During the warranty period, they did some adjustment and tightening. Now warranty period over, same rattling noise, the SA straight away tell me that I need to change the exhaust tips WITHOUT even ask checking or look at the exhaust. I go outside exhaust shop, the guy just tighten the bolt and kaw dim.

Every car is different. Their wear and tear also different. Vios for example, there's a reason why it's being called sampan. Really soft suspension. My friends always wonder why I can speed through potholes and speed bumps. Sometimes the weight of the car play a huge part too. I barely noticed what's wrong with my previous vios suspension, it's working great until you changed your absorber. Then only you realized that it dipped so much under braking previously.

New cars don't last long compared to 80s car. My VR4 rear wheel bearing already 15 years old and still good. However, my smart for four rear wheel bearing kaput after 2 years.

If u bought tan chong oil filter ,is local/china made parts

I dunno what it is with Almera. Go to Tan Chong service centre and 70% of the cars in there are Almera doing serious repair.

Buy Nissan branded.

Tried Tan Chong brand air filter before, felt the car very sluggish. Switch back to Nissan branded, feels good.

Some of the Nissan branded parts also made by Tan Chong, but most probably have a different quality standards.

Bro, trying to help. Your X-Trail is 4WD or just FWD? Since you already change the bearing, if your car is 4WD sometime the humming sound is from the rear or center differential.. They call it as differential resonance.. You ask those driving 4X4 pick-up they hear until normal de.. If the noise is not too loud, they cant claim warranty for you. It need at least some level of db noise above recorded in car to claim it.

Almera is cheaper than Vios and City. Now I see that the cheapness comes at a price.

My almera clocking 106k mileage till date. Bought it brand new in 2013.

So far I replaced wheel bearing ,front disk rotor and pads and front radiator fan motor.

Others like coil and suspension never change before.

Its a very good car, based on ur mileage ur car really tahan d.. consider a very good car.. nyek nyek sounds come definitely not from absorber shocks its coming from ur lower arm or sway bar... bad absorber makes ur car very bouncy and feel likes floating while driving... i bet if u change to another brand u going to regret more then ur condition now unless ur getting a merc or old toyota

This post has been edited by gabbyz: Aug 16 2024, 11:43 AM