The Android box also using wired connection. So total 7 connections to the TS-8-Pro.

For CCTV and android box using existing cat5e cables but for study room and AC Lite x 3 using cat6.

Can such a setup support Hypp TV?

I plan to house the ERX and TS-8-Pro in the DB closet as that is the location the Unifi fiber terminates and also all the existing cat5e cabling. Does the ERX and TS-8-Pro need aircon? hopefully not 

What is the range of the AC Lite in normal malaysian concrete and brick house? I plan to install them in front of stairwell to maximize clear distances to users/clients.

Can you provide a quote to supply and install including setup? I will run the cables myself. Would also need somesort of rack that can house the fiber modem, ERX and TS-Pro 

1. I running Cat6 for HDMI so might as well use the same for the new cables

2. so better to use AC LR

3. this is for a house lar, not hostel, but it is a three generation house so plenty of users, plenty of devices, so many streaming and what not, I want it to be reliable, and fast!

They dont configure hypptv and android box and not selling cctv dvr.

Hi Bro... I'm planning to use this kind of setup for gaming / etc...

01.Router Z (192.168.1.1) connected to 1 ubiquiti AP (LBE-5ac-16-120)
02.1 Ubiquiti CPE I (LBE-5AC-23) at my friend house and connected to 1 of his LAN port router (A).
03.1 Ubiquiti CPE II (LBE-5AC-23) at my other friend house and connected to 1 of his LAN port router (B).

* CPE I & II connected to ubiquiti AP
* Router A & B will have different IP / Pool ... (192.168.2.X) & (192.168.3.X)..
some question :- is it possible that people from router A & B communicate to each other and also communicate to (192.168.1.X)? ... can ubiquiti cater this kind of setup automatically via their route table?... or need to do static route via main router Z?

* Do the setup as above can be troublesome?
* Do you think the setup above expensive or it's value for money?
* How much roughly the cheapest total cost of 1 AP (LBE-5ac-16-120) & 2 (LBE-5AC-23)? 

* Off Topic question, how good are the CPE tested indoor? .. example connecting 2 23dbi (ptp) across a few houses, does the wave can penatrate to few houses with straight indoor line for 300 meter and still can get good reception?.. this is a experimental question if perhaps someone / seller have done some experiment with this equipment..   

P/S : Actually I'm planning budget for own cheap project with gaming friend related to networking / Streaming HD|4K & Gaming using product above...

Look Nice... May I know LBE-5AC-23 around rm360 per unit <- This 1 also can do ptp with 2 unit directly connected via bridge (80Mhz Bandwidth) Right? ... You Have this stock?

Yup I'm looking for that kind of device, it's also "awaiting stock" status from another supplier in KL (I live near KL) so I'm finding other place that currently have LBE-5AC-23 stock and have easy access for warranty... perhaps you can forward to your friend and also how fast did the stock will arrive if she have ETA is better, I also would like to know the rate if I take more than 1 device, and also need to know location of him/her shop incase him/her stock is arriving faster than other vendor.. for LBE-5ac-16-120 unit it's in stock according to another vendor with slight different in price, I'm thinking to buy  in bundle so that our "Network gaming / Sharing" project Price  & warranty are well suited and easier to kick-start the project when all the necessary equipment are ready and accessible... 

P/S : If his/her shop are around Selangor / KL then it's better option. 

Noted thanks eastherd, may I know if static route can be use on all kind of router? I means, not many router that have many options.. not sure if static route are standard function, because I think static route need to be maintain on all router that have different subnet so that they can talk to each other right. 

Hi, i am look for access point to extend my factory Wireless signal, currently i am using Streamyx 4MB.  Any suggestion on which wireless AP to use ?

Currently my setting for wireless AP is Tp-Link WA830RE somehow i felt the wireless signal is not strong enough at some spot.

Hi,

May I know how is the capability of AC LR model for 2 semi D house with just for Wifi hotspot purpose? There are quick numbers of edge of wall due to re-construct it 2 in 1....or any proposal?

Planned to use TM Unifi modem and connect to one Wifi router as hotspot...

Do you think its sufficient to fully covered 2 semiD house with total build up area 60 x 70ft?

Can you provide me model and price for the wireless router?

thanks.

any company that can set up configure ubiquiti devices for unifi?

Hey guys, i have made a tutorial for setting up edge router with unifi or maxis with iptv. Hope it helps. Cheers

Yup, been using it for months now. Helped a few forumers here too. I have been getting a lot of request. So i decided to post it to the public so everyone will be able to set up theirs easy.

No i have not, blog does sound like a good idea. Im no expert, but im gonna try to setup my own web server soon, who knows. Always away huh, sounds like u have a better life than i do. Btw back to the topic, u can give it a try sooner or later. Its more like a 15mins setup for a first timer. Its only click click n done. Cheers

Yes it does bro. Can set it up easily. Ur using one are u?

Nice. Those are full on ubiquiti man. How is the performance using wan through all 4 wans? Does it go through the switch chip or straight to cpu? i always wonder. Btw whats your isp? 4 diff ones?

so im guessing ur doing 100mbps each? nice setup and that er-poe potential is scratched almost half way. must be a big number of users in yr place. are u in any chance running a server/s behind that router? maybe a good ol vpn? =)

may i know if if u run vpn on the router or dedicated server? Its a known issue for running vpn server on edgerouter using multi wan.

Yea i agree. I wouldnt use a built in vpn in your case. Port forwarding is a headache? Is it like a bug issue? Yea there are a few some bugs needed ironing on edgerouter. In my case, i need l2tp client interface which is non existence.i guess its a waiting game. Anyway, since there are many clients connected to yr system, are u segmenting them via vlan? How did u do yours?

Ahaa.. i would imagine that will be confusing. Btw, does pppoe on unifi biz require vlan? I dont suppose they hav an iptv with it right? Btw, is there any free hotspot deployed around your system area? I may go to the area and check it out. LOL

Holly wow! That must be amazing. Just one thing tho, if its ipv6 only, then the rest of ipv4 wont work. I can count my ipv6 use with one hand. Lol. Maybe can setup the router to tunnel an ipv4 route. But i have not study that yet. Cz most isp uses a stacked protocol anyway. Damn thats interesting