Got ER-Lite yesterday and setup within 10 minutes, all running fine.

OpenVPN site-to-site VPN setup to ER-8 sitting in UK office, working without issues (had Windows 10 drop L2TP VPN every couple of hours before - hence taken this approach)

Now I've set up the VPN I'd like to block some of the traffic as I only really need to have connection to the NVR for CCTV and RDP into a couple of machines. Also, the ER-8 side doesn't need access to any devices in my internal network.

Is there an easy way to set this up, or just a bunch of custom firewall rules? Previously only used client to site VPN so that was a little easier.

Ubiquiti Unifi AP a bit sad. Really need to tweak to get the best out of it.Auto function like no function

ya latest. controller on 5.3.8.2.

the Auto function in transmit power is still useless and there is still no active channel sensing.

Hi, I plan to change my router to EdgeRouter but not sure if I really need to.

Currently using

Unifi 100mb

Asus rt-n66u>tplink 16port gigabit switch + toughswitch 5port>2 UAP, 1 UAP-LR (3 floor)

All via cat.5e

Devices
2 NAS
3 streaming box
Unifi hypptv
Cctv

Wifi devices: around 20 connected at the same time.

Thanks

hi, wanna ask for advice to setup ubiquiti wifi networks around the house,
3 storey house, main unifi access at middle floor.
currently using old unifi router, unifi 50mb

wanna change all to use ubiquiti, and setup middle floor as the main unifi connection, with acces point on top and btm floor, something like below:
[attachmentid=8383846]

any suggestion? what would i need?

does ubiquiti have any wifi router? i wanna replace my unifi router fully.

the current one faulty. lol
meaning I need to get a router and 3 access point on each floor?
how much roughly will the devices cost

3 ap + 1 router should be near 2k    wew

I've been using EdgeRouter Lite for a few weeks now and it's fantastic - not a single hiccup

Been running with a constant OpenVPN site-to-site tunnel to my office in UK (on an ER-8) and it hasn't dropped the connection once.  Using L2TP before and I was getting drops more often (which I suspect were related to my NIC)

Don't regret the purchase one bit! Now just need to figure out how to setup a Client-to-Site OpenVPN for when I'm travelling next month.

If you have multiple WAN connection, make sure VPN connection not load balanced to a different WAN from the original WAN when the VPN was initiated. Also some ISP throttle common VPN protocols (that used fixed port & protocol) for consumer internet.

To be honest the setup was a bit more hassle as had to use CLI rather than GUI, but after working no problems at all.

Did you have a look at the logs? Might shed some light as to why it's not working

i am using NSM5 to beam wifi across 2km, perfect signal.....very happy with this product

hi ts,

any solution for:

1.) wifi for office (all glass partitions)
2.) wifi for guest or hotspots with accounting/security control

what sort of pricing like?

pm me.
thx

Thank you for sharing yr experience. In my case its a little different. I ordered my erl from latvia and i collected it without sirim. Took a week to arrive to my house. That was around 6months ago. (Am i lucky?)
And then, a week ago i ordered a ccr router from poland, dhl called me 2 days after shipment saying that i need sirim for it. I told them that it wasnt a wifi router and told them to send it to me asap. Then what do u know. They sent it to me a day later. Again without sirim(lucky again?). In my understanding, u dont need sirim for wired router, but u need sirim for radio related product such as wifi ap. Am i wrong? Im here to share my experience, someone maybe have a clearer understanding about sirim approvals.

Its much simpler than that. I mean law for importing non radio related router. Does it require sirim like the rest of wifi router in the market?

just a quick questions all sifu, does UBNT UniFi Security Gateway compatible with TM UniFi ?

Sorry for the late reply, i need to cover a particular area. Not sure i should use NanoStation or NanoBeam ?

I wonder edge router poe-5 possible to use as switch and poe at the same time ?

Eg :

Etho = wan
Eth1 = lan
Eth2-4 = poe

If can that means we can save a lot on the ubiquiti switch + Poe

Hi,

I'm plan to do bridge for a distance 2km and here is my configuration.

Location A = Fiber time router (300MBP) > NBE-5AC-16
Location B = NBE-5AC-16 > Router.

Is that I'm correct to setup like that ?.

Thank you all sifu first.
Regards
Symon Lim

Damn this is rly interesting project. Location b is landed or high rise too?