anyone still able to download the UniFi Network ios app from app store ? seems like its not available in MY app store anymore..

Dats y I ask previously why TM did not sue. But sombody say settle liao also why did ubiquti infringe TM tradrmark

Also "unifi" name belong to quite a number of other entity so I dont know who owns what.

I'm planning to get an UAP-IW-AC. I just want to know, since it's passing about 48V through its port, will it fry any equipment if connected to the two Ethernet ports available?

Planning to connect a TV box/TV and a Sonos speaker.

Anyone know dream machine?

Hi, i just try the new ui demo at the ubnt for UDM (unifi dream machine) .

before going to purchase , i would like to know it can support vlan500 and vlan600 at the same time? so can get the lan1 lan2 lan3 all on the same subnet ? i no mean inter-vlan.  

Just act as normal router will do la. All port use 1 subnet.

Not really understand what you saying. whats lan have to do with vlan600? Then lan1-3 same subnet? If same subnet than it's will be same vlan. Maybe can describe what you trying to achieve

Anyone using noip ddns with edgerouter x here? I'm facing the public IP somehow not updating after public IP changes due to reboot of device or reconnection.

Using PPPoE already bind to this interface, done force updating from GUI and check CLI no clue what's the prob...

I have to go noip website to manually update the new public IP myself zzz

Amplifi alien not available?

Hi, which router model would u recommend for my condition:
-2 floor semi D (is the square foot important for u to take into account? Not sure how big is it exactly). Edit: around 5000 squarefeet
-Currently using default TM router/modem which is located at the ground floor.
-My rig is in my room at the 1st floor. (currently using wifi connection as cable is not an option)
-Am still using 10 mbps unifi lite as my area got no coverage for the upgrade yet.
-Wifi throughput is not the best but decent. The only thing that I am looking to improve with the new router is wifi stability and reliability as i do play online games from time to time.

I am unable to connect to 5ghz wifi in my room but the ssid is separated all this while.
i have googled vlan tagging and read about it but still couldnt understand it. 
and yea i think it's still streamyx as the cables are not being upgraded yet... still using the same old cable

Currently the router provided by TM is an all in one modem/router i think as there's only 1 device instead of a separate router and a modem. That device is connected to a telephone line(rj11) to the WAN port.
My plan now is maybe to get a UAP nanoHD(for future proof. is it worth it?) and a UAP ac lr. the nanoHD will be the main router sitting at the ground floor and the UAP ac lr, which will be sitting at the 1st floor or in my room,  would probably configured to media bridge or mesh to extend the signal. is it a legit plan?

Hi. I just got into the Ubiquiti ecosystem and am trying to understand how to configure my nanoHD for 5 GHz properly.

I did a radio channel utilization scan. For 5 GHz it only displayed statistics for the DFS channels. In addition, I cannon select non-DFS channels in the AP configuration settings.

Does it mean that the scanned channels (all DFS) are the only allowed channels for Malaysia?

Well, I tried selecting the lower range non-DFS channels (36-48) in the radio configuration panel but it does not stick.

Somehow it only allows selection of channels that have been scanned previously (or it only scans channels that are allowed to be used for Malaysia). The only channels scanned are 52-64 and 149-161. If I leave it on auto the UniFi controller will default to the DFS channels.

I don’t know the actual 5.8 GHz channel allocation in Malaysia so I just want to check if these are the only channels available.
I’d like to use a lower frequency channel if possible assuming that the propagation is better (though it might not make much difference, I’ve not tested this in actual production environments).

What are the default 5.8 GHz channels that I should use for Malaysia?

This is what I get when I try to configure for Channel 100 on my nanoHD.
Anyway, I've decided to set it to Channel 149 for production based on the SKMM guidelines.

I've removed personal identifying info. Currently I've configured 5GHz  to use Channel 149.

Hi would like to ask how to configure the UDM? I try configure my advanced internet option and fill in my (TM UNIFI) username & password but still no internet detected. Can anyone help me ?
My setup now is the Nokia Unifi Modem which given by TM then direct plug the WAN to the UDM

No idea how to do it. Anyone expert here kindly can teach me?

Thanks @pandera999 and @wanttotree for the guide. Done configure it. I’m new to it and seems like quite tricky.

Setup the AP AC LR earlier and disabled the wifi of Asus 5300.
Simple setup but :
1. Unable to use my Mac to run Unifi Controller so had to use WindoZe instead
2. Would it be ok to combine 2.4 and 5 or should I separate them?
3. Everything on auto mode now and the 2.4 is on channel 6 while 5 is on 161 - is this even desirable?

Did a speedtest - wifi speed doesnt even come close to what the Asus 5300 can do but range is excellent even for my 3 storey house.

Please take a look and suggest - much appreciated

They are connected to both 11n and 11ac but maxed at 300Mbps.

Anyway I have solved it via a chat feature with Ubiquiti guy.
Now all good devices are showing max Mbps as they should