I tried Clapton Kanthal, amazing. Can't believe is in TC mode. LOL some question preheat punch is on 4.4 instead of 5 or higher. What exactly it giving under this configuration. Notice the temp.c is off ( why ) ?

I changed the power to 60w and preheat power always can higher than power so I adjust slightly higher to 65w. Very nice firing though. The profile itself is based on what ohm actually? mine currently is on 0.2ohm.

This post has been edited by snake1983: Aug 5 2016, 12:04 AM

Kanthal don't need TC, so I set it off. The csv file for this material in the profile have been modified just a bit so it can do preheat. Regular kanthal csv can't do that. You can just open steam-engine.org and make yourself csv file according to your type of wire clapton, twisted, what gauge using, etc. under the tab wire wizard there. Don't remember exactly the ohm I intended. 0.3 or 0.4 if not mistaken. You can change the preheat punch the way you like. Glad you like it.

where's the location and any contact?

I can't remember the exact place, but the shop located at level 3, if i remember correctly have sun inn hotel in front of the building. Dunno if they move out or what.

Btw i sent my mod via Pos Laju to this address:

No 17, jln ss 6/12, kelana jaya, 47301 pj

018-243 3375

thx .. nanti i inform my fwen

Vaperz Cloud Mega Tank (VCMT) clone landed today.

Click to view large image


Just a few words on it as it's just another run-of-the-mill atty. It's a simple tank, duly designated as my beater rta on my beater mod.
Fit and finish are OK. Was clean out of the box...no oils.
Machining is OK with the exception of the barrel threads which are slightly below average.
Washed, coiled, wicked with a generous amount of cotton, the "juice flow control" set at 50%, juiced up and duly vaped. No leaks.
Vapor produced is decent, flavor and clouds-wise.

Note the 2 Allen keys (black and chrome) included. The grubscrews on each post have a different slot-size for the Allen key....that's why they gave two of different sizes. I have NO IDEA why they did it that way.
Also included was a novel translucent "middle finger" 510 driptip which doesn't fit the device, but does fit my other attys with a 510 opening. I have NO IDEA why it was included, but it's an amusing bonus.
Mysterious are the ways of the clonemakers.....

Ehem...



And before everyone goes ballistic, no I didn't buy either. Just felt like sharing. At VE SS15. Selling at 400-ish IINM (do check, I can't remember).

And yes, the Nano is *that* tiny. It's so tiny I'm vapelusting right now... just that I can't justify buying one AT ALL. So yeah, time to go no no now.



This post has been edited by Eiraku: Aug 5 2016, 05:38 PM

Somehow I prefer the vt75 instead of nano though. Quick update on therion battery life is improved full charge morning until now I have 75% battery life left. Cuboid should be 50-60% by now.

You prolly like your mods beefy. I like mine small so yeah, much vapelust.

In other news, my FT vs GB shipping battle is still going on... both hasn't arrived yet, as expected lol.

This post has been edited by Eiraku: Aug 5 2016, 07:18 PM

WikiVapes selling VT75Nano @ RM390.. HE4 batt included..

https://www.facebook.com/groups/93251076015...99279730148847/

Size comparisons of the HCigar VT75 nano with other devices at 3:48.

Seems to be about the same as an Evic VTC Mini

Felt like it was built better, and fit better in the hands too. Otherwise it's about the size of the VTC, if not a hair thinner from the side.

RM390. Donno can get member discount or not. andyng38, interested.?

Yeah..for that price, the quality should be way above that of the Evic mini. Which reminds me... my first Evic Mini (RIP) was purchased at VE SS15.

Very very VERY interested....but I am forcing myself to have a cooling-off period. Decided that I will only allow myself one DNA75 device (because I really don't need two). Would really like to hear your experience when the nano reaches you, esp about the battery cover. I know your opinion will be most reliable.

Ten more days to arrive to seller, dont know how much more before arrive to me. Sure someone from this forum will share their opinion as soon they get one. I'll try my best give you my opinion once the Nano arrive and compare with my other mod as well. Or you can test during your visit to the store.

So far I read other people opinion at ecf, the battery door is PITA to put back. Some even put a brand new battery and leave it in the Nano, use the on board charging instead

Regarding the VT75 door I mention earlier, I take that back. It's easy actually to put the battery door back. It just me doing the wrong way.

This post has been edited by waqi953: Aug 5 2016, 10:12 PM

No hurry..I will wait to read yr experiences. Thank you!!
Am very far from any decent vape store right now. Some times I get too caught up in vapelust madness...have to take a few steps back to see things in proper perspective.
Tweaked the VCMT clone a little more...and am pleasantly surprised at the flavor intensity. Not bad for RM56 Happily blowing huge clouds while watching

Smok H-Priv 220W and Rulo DNA200 at 60W test with triple Temco Kanthal 24g 3mm 6 wraps. On par.

Been playing with tweaking.
The preheat power level, punch level and duration allows me to somewhat recreate an "eating experience" in vapor, so to speak.

Imagine if you will, biting into a hand-sized mini apple pie (or any other bakery item) that got out from the oven 30-45min ago. You bite into the the crust...a rather warm gush of aromatic crust and pie filling hits your senses. With the crust broken, the pie starts to cools faster. Makes me wish there was a chicken pie ejuice

Found this rather thorough and detailed posting on fine-tuning TC
http://www.ecigssa.co.za/guide-to-fine-tun...-vaping.t18206/

Nice share, the therion really impressed me. I haven't charge the mod since yesterday morning until now. Still remain in 50% battery life. I'm firing at 70w every time really awesome.

Yup...yr mod has respectable battery life...such is the advantage of dual 18650's. I didn't do any calculations, but believe that 2 cells at 70W would benefit from the more efficient buck conversion, and 1 cell (VT75 nano) would be boosting all the time, which is less efficient. Maybe some electronics boffin can clarify that.

Now my poor tired brain is thinking again....single cell slimness or dual cell longevity....more weight and bulk vs ultimate portability. Time to switch off pc and go run 5 or 6km.