ps ... the trex 450 PRO is selling at rm1459 at mega shop !!!!
the clones are all dead liau like this ..

Don't think so wor as FP and CP head design is different mar...
But the tail part should be same... 

Yes the Neon frame can support for both FP and CP head design. But not sure whether Belt CP head stuff ngam for it or not.

Since you got the belt cp why don't you just buy the Compy 300 V2 kit and transfer all the electronic over. This way you'll have a dureable 300s heli to play with liao. 

* I just check with Ivan, he say the belt cp might not fit in the Neon or Compy frame. The rest of stuff might be able to use back. But the esky TX can't be use. 

those ones i think uses 3S 800-1200mah .. coz small heli cannot carry heavy weight maa ..

These 2 models not laku in Malaysia arrr? Hobbyasia also no plan to bring in double brushless version. Any others indoor model can recommend bor? Must have full brushless lor....If I bought 4#3b or 4g3 later bor spare part masi gai....

Very troublesome lor...

I hv never buy anything from oversea before wor...will kena tax one bor? Need to go to kastam to collect the stuff or they will direct ship to my home? Pay by cc arrr? Save bor...worry lar....

Now I'm really regret didn't buy the 4#3b single brushless from hobbyasia. Only 430! Where to find so cheap eh price wor.....

nvm .. me almost done liau the 450 .. now doing settings on heli and tx
gyro next .. then i SHOULD be done liau i think ... hehehe
MUST finsih tonite .. otherwise tomoro nothing to play

farks man .. this wiring running all over the place is really peesing me off leerr .. hehehe
now just wires and can plug the motor in liauu

Wah, u going to get both?

I think I have decided to go for 4#3b double brushless. Will place an order very soon

u guys never see the chinesejade site i point ot u guys one ah ??
the shipping is usd5 flat ... his prices not that bad laa

normally if crash the 4g3 .. #1 rotor shaft (usd2) .. #2 blades will break if foam .. if wooden ones then prolly not much damage and can be re-used .. #3 look out for swashplate ball breaking off if u have very hard bladestrike .. #4 after many many crashes tail boom and skids .. #5 not much liau

actually its very durable in crashing for a Cp heli .. initial costs are high .. learning curve very steep .. but its all worth it la for me .. hehehe

anyways ... update
my 450 pro already spooled up just now .. very power ooohh ... not yet get off the ground yet coz just finished at 730pm .. dark liau
this is where the 4g3 comes in ... fly anytime anywhere .. hahahaha

not too happy with some of the wiring arrangements ... will re-do wiring later this week laa ... or maybe tomoro .. hehehe

---

Added on June 28, 2009, 9:39 pmps ... be prepared to deal with very small screws and other stuff if u do crash .. hehehehe

---

Added on June 28, 2009, 9:40 pm

some ppl complaining the double BL 4#3 flies like a pig ie. heavy coz the extra weight of the 2 esc it is carrying ... u will have to change to 16t pinion to get acceptable lift for more fun ... stock pinion is 12t for the walkera BL motor

---

Added on June 28, 2009, 9:41 pm

i will be wanting to convert my 4g3 to spektrum too .. but need info and calculate the cost .. so far it is estimated to be close to the price of a 4g3 already including rx

err ... 450 pro already got chinese weight mod .. plus i oso do the helifreak from leading to trailing edge mod for the tail
the dampers ?? me now all stock stock head .. just now spooled up close to half throttle oso no vibrations damm smooth .. hehehe

if u want a CP then 4g3 .. fp ma 4#3 lorr ... nothing to think about oso
if u have never flown an FP b4 .. then can try lorr
i will stick with my 4g3 .. very happy with it .. hehehe

to go spektrum on the 4g3 .. u will need to use the ar6300 .. that one ultra lite at 2gm only ... and the sockets are compatible with the walkera servos so u dont need to mod connectors ...
the only thing u need to do is to step down the rx to take as low as 2v 1S .. and oso find suitable esc to run the tail .. main walkera esc should be able to run off the rx no prob .. tail esc alot of ppl using turnigy with the 2.9g or even more powerful motor ... the 2.9g is more than enuff liau
the u will need a gyro which u will striped down the casing ..
thats about it already lorr ... hehehehe .. costs u count yourself

The cost to mod the 4G3 to use spektrum will almost similiar to the cost of Compy 300 V2 heli.. 
But as Allan say... u can fly 4G3 anywhere mar... Put in a tollbox bring out then fly where u like... 

450 PRO is now RTF .. just waiting for suitable time only .. hehehe
wiring and all other stuff in the 450 PRO is now built up to my expectations (for a 1st timer with 450 helis) .. nice and clean look .. ESC and most wires are neatly tucked in and hidden inside the heli ... nothing outside

the 4G3 is now back in bizness oso .. since i have completed my 450 PRO .. i have time on my hand to really really check out everything
i have found that the soldering of the 3 wires coming out from ESC to BL motor inconsistent .. previously never checked there coz its is all stock from factory and nicely wrapped up in transparent shrink wrap
now that i have found what is the problem i temporarily taped the wires tighter to the ESC and everything is working beautifully ... hovered 3 packs this morning .. hahahahahaaa
the ON THE WAY esc + main BL + 4n1 will all be kept as spares ..