If you need to crash then crash and burn..
You're not alone

This post has been edited by yehlai: Dec 8 2006, 02:00 PM

Core temp's reading temp is 5-6C lower than TAT...

core temp and TAT temp reading is different. Becoz core temp's reading always lower 5-6 degree. Just open another TAT and compare yourself. TAT is more accurate becoz TAT is design by Intel itself for Intel proc and mobo.

oh ya thts great.. u can throw yr E6400 to my place then, i can take care of it.

This post has been edited by yehlai: Dec 12 2006, 03:26 PM

hey dont edit post dude i heavent save yr reply for future proof

@Evogenix
I cant find new BIOS for PS3 at Xtremesystem.
Cant even find where to d/L BIOS for Gigabyte mobo.
Can u gimme some hint please??

Dont need to run so tight if run 24/7, CL-5 is good enough


@Evogenix
u think porc week will affect o'c result a lot??

This post has been edited by yehlai: Dec 12 2006, 10:36 PM

Ya mine is over 3Ghz (can see my sign).. after reach tht clock speed add vCore or vFSB/vMCH also no use. So frustrated.. but nothing more i can do.
If E6400 i think have higher potential to hit 3.6Ghz.

it should be proc tht bottleneck my oc..
Not all E6300 can reach 450fsb, as u can see from lyn or foreign o'c board.
How much vCore u feed to hit 450 ?? Agree with u, its really not good for 24/7.. last time i also play undervolt.

Yes... E6600 is better. But i think its becoz of higher multiplier for oc. The extra 2mb caches only make less than 5% of performance difference.
I cant afford E6600 can only buy E6400 after i sold my E6300. I just need top up RM50 only

This post has been edited by yehlai: Dec 13 2006, 05:23 PM

-Sorry. Double Post-
Merry Xmas

This post has been edited by yehlai: Dec 13 2006, 05:05 PM

im not sure.. but i saw many E6400 can easily hit 3.5Ghz or more.
If only compare the clock speed, then E6400 sure can reach higher clock.
Frankly said, performance diff between E6600>E6400>E6300 can see from Super Pi is 1-2 second different.. maybe big difference in benchmark (can say small too)but cant feel diff in normal use. Anyway its quite subjective too.

Price/perf ratio i think E6400>E6300 if can buy from Bulk.

Dont need to set vCore to the lowest point.. as long as your core temp is below 55C during o'c then should be quite good d...
I undervolt becoz dont wanna stress my proc too much, not becos of trying to achive lower core temp.

idle.. if load/gamming should be 56-57C for my porc @ 3Ghz

Biostar 965PT is Xbit lab ediotr's choice mobo.
From Biostar 965PT review. Memory speed is 533, 667, 800.
Can it support proc 1066 MHz FSB ?

This post has been edited by yehlai: Dec 14 2006, 10:01 PM

Yes, u must o'c your RAM to 800Mhz. Set the RAM multiplier to 2x,
become 400x 2 = 800Mhz.

Can beat Asus board.. Biostar should be proud !! 2 thumbs up!!

No harm.. atleast wont burn the proc rite
Yup same like mine, down 2 notch lower 1-2C

Got my Biostar 965PT today , used Gigabye b4. Frankly say 965PT looks'inferior' if compare with S3. Everything especially socket, North/south bridge sink and even the cable. All looks cheapo lol.
But this board comes with 2 yrs full warranty and hv good o'c interface
Will try to o'c it soon. Hope can get good result

hey how extreme your E6400 can go?? 4GHz can??

My S3 also used DS3 F7 Bios before.. ithink S3 can use the D8 Bios maybe.