Probably comparable in terms of performance but haven't had a chance to test the DIR-850L. The RGX4400 I use almost everyday at a local coffee shop. It works very well given the number of users that you'd expect at a busy coffee shop. Quite impressive for a free router. I posted a few tests I did with utorrent and speedtests in this thread. Search for RGX4400. Wifi is quite good. The shoplot here is 22x75, I think. Corner lot so 44x75 and the RGX4400 covers all of it and more. But of course, coffee shop layout is very open, house will be different.

The GUI of the DIR-850L is so much nicer to look at. A graphic designer worked on it obviously. It has a few features such as Shareport and myDlink which might be useful to you.

The RGX4400's GUI, on the other hand, is a just series of tables and text. It's quite comprehensive. Lots of things to configure. It has a USB3 port in addition to the USB2 port.

This post has been edited by soonwai: Jul 2 2016, 03:26 PM

Yeah, the 4332 not that good. Tends to slow down over time. Lack of ram or memory leak, I dunno. Did you upgrade to UniFi advance and had your warranty renewed? Maybe can try to complain about something.

For example, one of my friends zapped one of Ethernet ports with 240v 12V and had it replaced. Lots of creative ways.

This post has been edited by soonwai: Jul 2 2016, 06:56 PM

This post should help with the password:
https://forum.lowyat.net/index.php?showtopi...post&p=80557394

And this one on custom DNS.
https://forum.lowyat.net/index.php?showtopi...post&p=80572326

This post has been edited by soonwai: Jul 2 2016, 10:28 PM

It's PPP specific. Why, is explained in the doc below which I've read but not understand. But basically it's 1500-6-2=1492.
http://www.cisco.com/c/en/us/support/docs/...pppoe-arch.html

All blue and pretty now. No more orange menus.

This post has been edited by soonwai: Jul 2 2016, 11:04 PM

199 is the current price,
I'm paying 179 which is nice,
169 is just less a little bit,
But it's the lowest so far so just go for it.

Me too. When UniFi 30 came around, I had the option of getting it for RM179 or staying on 10mbps and saving a few bucks with Maxis Fibre at RM128. 148-20 since I was a Maxis mobile subscriber.

In the end, after reading a few horror stories here, decided to stay with Unifi.

No probs. I actually gave you the wrong post for the password. Should have been this one.
https://forum.lowyat.net/index.php?showtopi...post&p=80558352

Let us know how the router performs for you. I personally think it's pretty awesome for RM0.

This post has been edited by soonwai: Jul 3 2016, 12:42 AM

Yes, you can. Not sure how Unifi would do it but my auntie's restaurant has 2 Ohana subscriptions and they come in through one BTU on separate VLANs. So they have 2 separate accounts/bills, 1 BTU, 2 VLANs and 2 routers.

If you can show that there's a problem with the BTU, TM will change it for you for free.

Don't quite understand your problem. Where are you plugging the lan cable to?

If cannot call in to phone means BTU no connection to TM. Maybe BTU or cable outside problem. What do the status lights on the BTU look like?

Why not call 100 to come and check? I don't think TMPoint will change the BTU for you. Because the new BTU needs to be setup and registered to the OLT.

This post has been edited by soonwai: Jul 3 2016, 05:01 PM

The BTU in my Auntie's restaurant has 4 Ethernet ports. Lan 1 is not used. Guess it's reserved for UniFi. Lan 2 & 3 are used for her 2 accounts from Ohana.

It's in a commercial area, shopping mall actually, so probably biz package. Ohana.com.my is like Maxis or Celcom, TM infra based providers. Most people have never heard of it.

Anyway LAN Port 2 of TM'S BTU is definitely not reserved for Maxis. If anything, I'd say Lan Port 1 is reserved for UniFi and the others are up for grabs.

This post has been edited by soonwai: Jul 3 2016, 10:45 PM

They should have it at TMPoint but, to be safe, go to the actual TM TMPoint and not the authorised dealer ones. Why not just try to get TM to replace your RG4332 with a new router for free? You upgraded to the Advance package right? So your warranty should be renewed also. Of course, you have to show that there's a problem if not they might charge you for it.

That sucks, hope the upcoming Raya hols doesn't delay the repair. I think a lot of people balik kampung already.

From the horse's mouth. https://www.tm.com.my/Home/Broadband/unifi/...redit_Limit.pdf

It's like your credit card, you still have to pay your monthly dues even though you have a credit limit that more than covers it.

I'm sure calvin meant that they're not the same.

This post has been edited by soonwai: Jul 4 2016, 07:28 PM

Not really, only thing I'm aware of is Ruby is priced same as Aneka & Varnam. It used to be RM10 more.

Have you asked in the Maxis FTTH thread? The Maxis rep guy there seems to be quite knowledgable.

Latency to where? I'm getting about the same (5ms) to my office.

If it's a big house, it's probably a wifi signal problem. What router are you using now?

What router are you using now? And what was the previous TM router?

You can PM nyunyu, I got him to do the Unifi application for my uncle. Took only 2 work days (4 including weekend).

The Unifi standard router is actually very good already. Don't really see a need to buy another one.

Check out this thread for some tests I did with the "unifi standard router".
https://forum.lowyat.net/topic/3994248

This post has been edited by soonwai: Jul 5 2016, 04:41 PM