All Owner mind to share your Aeneon 1GB DDR 400 (CE-5) overclocking result here ?

Me first


Able to Pass Memtest 260Mhz with 2.7v (lose timing) 3-3-3-8

I having diffucities to lower the Cas Latency even with CL 2.5 @ 225Mhz wont stable. Worst is my Manchester 3800x2 cant stand at this HTT

How you Guys Tweak your timing.


Thanks for Sharing in Advance


LOL Pai Seh , and this make more ppl come in

This post has been edited by horphi: Jan 11 2007, 04:29 PM

threat = ancaman

lolz!

Wait till I get mine tmr then I post

Fuah, U wan to Give warning sama Orang ar?
Threat...

Dude.Thread lar.. not threat
forumers see already oso scared

, i see a threat...
anyway, i wonder this RAM module's chip same as Kingston HyperX PC3200, FYI, i can't go higher speed even though loosen timing...

bios 623-3.. ( for my TCCD 512x2 )
prime for 1H30min @ 2.5 3 2 6 250Mhz
now running @ 2.5 3 2 5 @ 240Mhz

This post has been edited by p0kteh: Jan 11 2007, 03:16 PM

gud job there bro! 250 @ 2.5-3-2-6 is just as gud as those premium ram...

wow. cool


mind to share Vdimm ?

250Mhz @ 2.5 3 2 5




This post has been edited by p0kteh: Jan 12 2007, 08:00 AM

These r infineon/Aeneon BE/CE series...they r indeed used in performance RAM. The only 1GB module better than these r Microns...

Looks like AMD boards get better speeds
I can't even get into Windows at 250Mhz 3-3-3-8

Currently running at 230Mhz 3-3-3-8, double priming, so far no errors

Nice....what mobo u using?

I only able to get 249Mhz-250Mhz wit 3-3-3-8
Using MSI Neo2 non-platinum edition

can anyone post the result of these ram in DFI expert board? all the small details such as drive strength so on... i cant do 250mhz for da ram... wat is the voltage limit of these ram>?

Any Intel users here?
Post your results, I can't stable at 250Mhz 1:1 3-3-3-8 at all

currently, i am running at 225FSB, 1:1, 2 3 2 5, 2.7vdimm.

been using that for days. never faced any problem.

its normal lar. my P4 3.0e totally cannot go in windows at all with these timing.
only thing that i can do is running back to 200mhz with timing 2.3.2.6. MAX can only do at 220mhz with 2.3.2.6 but the PROC temp super HOT!!! reach 60c++

haiz.. intel is like that wan lar...

err fren can i ask u some question when u reach 225fsb,playing game like CARBON,will u get articfact.
cause my PROC very alien wan reach 225fsb articfact coming out. haha and my GC are runing stock speed.

ocz limit their voltage @ 2.9V same chipset ..
*never pump my ram > 2.8V

its ur RAM problem, not ur GC

irangan, mine can boot at 225Mhz 2-3-2-5 but memtest86 got errors so don't bother tighting it. Currently on 227Mhz 2.5-3-3-6 2.7VDimm

Hmmm...I found something weird, maybe its for Intel users or solely from my board

Lets say that 235Mhz 3-3-3-8 at 2.8Vdimm and 1.65Vcore in BIOS 1:1 with processor 235Mhz FSB, it can boot and run benchmarks no problems but memtest86 will show errors BUT I manage to eliminate that by apply more CPU voltage to a higher amount >.>"

How about other Intel users? Same thing like mine? Need to pump up the juice just the stabilize the memtest86?

Im not using Dfi expert lah, but using sli-d.

The settings i've done was to specify the timing of 3-3-3-7 and force enable 1T.
The rest of the settings i just leave it at default.
Bios i forgot what version already. Its been so long since i overclock!

Currently running 24/7 since i got em with the following results :
2.6V ram voltage

Today after countless times of testing, the highest I got is till 240Mhz 2.5-3-3-6 1:1 with my Intel setup

Really picky with Intel boards indeed

This post has been edited by shinjite: Jan 13 2007, 07:15 PM

what is MAIN the possibility when u can pass memtest for > 8hrs but u cant logon to windows?

lack of voltage

im having same problem i can pass memtest for 10 hr . but get blue screen when get in windows SOMETIMES ONLY. And i was unable to go in Windows VISTA at all



Guys what Color Dimm you all using.

This post has been edited by horphi: Jan 14 2007, 10:30 PM

shinjite, previously i mentioned in 478 thread that my ram cant even boot when 225fsb 2 3 2 5 vdimm 2.7. after some testing, i found that whenever i cant boot at those timing, i just need to use 2.8vdimm then i can use my comp like normal.

but most of the time, i can use those timing with only 2.7v. i dont know why is that. probably my mobo problem.

DFI NF4-ultraD

i think u shd find out what the stability of ur pros since u already known for the ram...


http://math.gogar.com/athlon64.cgi?htt=300&showtable=1
http://math.gogar.com/athlon64.cgi

test test test..

This post has been edited by p0kteh: Jan 15 2007, 09:26 AM

as I said, this ram is picky on Intel mobos~~
Most of the testing done is on AMD so nothing much we can do~~

My experience a bit weird too....memtest86 errors at 227Mhz 2.7V 2.5-3-3-6 but can boot to Windows. Tested with 2.8V same timing, memtest86 no errors at all.....now went down to 2.65V/2.7V with 2.5-3-3-5 no errors whatsoever....

This post has been edited by shinjite: Jan 15 2007, 01:39 PM

alwez try from lowest to highest. i'm runnin my pair of ce-5 @ 240 @ 2.5-3-2-5 w 2.5 + .3v.

as for d bsod thingy, try to play w d drive strengths too.

This post has been edited by ah_khoo: Jan 15 2007, 04:20 PM

i have even more weird.

i have pass memtest >8hr 250Mhz 3-3-3-8 2.7V , 260Mhz 3-3-3-8 2.7V but fail to boot windows.

now 225 3-3-3-8 fail memtest #5 with 2.6v , 2.7v , 2.73v , 2.63v

mind to share your amd64 tweaker to all of us ?

ram on orange slots ?

have to test a lot of times, the possibility and all...

for my exp find out ur proc max fsb use sp2004
then run sp2004 blend stress test priority 9
and set fsb and timming with clock gen and a64 info or memset
run more than 2 hour sp2004 blend stress test priority 9 for 24/7 setting
for me memtest cant be trust any more...i just use it for burn in the memory

This post has been edited by skydna: Jan 16 2007, 05:26 PM

but passin memtest is d BASIC for ram oc, if ya ram cant pass memtest, dun even think that u'll pass prime.

in memtest, it only tests stabilty of ram, while in windows environment, everything counts, correct me if i'm wrong...

some out of topics questions, the higher the priority means better stress? kinda confusing.... wat the diffrence if i set the priority to 1???

yeah. finally found out. the root cause. the problem im facing is compatiblity issue.
now even i everything on stock, Dual channel cant boot windows and get memtest error ( sometime pass)

have tried several version bios. result same. any suggestion ?

yes it will more stress when set to 9 but just dun try 10
so will fail faster if unstable
cause when set to 10 ur system nearly not respond to you already
system will 100% consentrade to the sp2004

This post has been edited by skydna: Jan 16 2007, 10:38 PM

i think you can try
-set the DS and DDS (normally set 8 and 3)
-set tref (normally set 4708 or 3120)
-overclock at 2.4~2.5v
-change slot
-run at 2t

my setting @ 240Mhz
bios 623-3
DRAM Configuration Settings:

DRAM Frequency Set............................ - 200
Command Per Clock (CPC)....................... - Enable
CAS Latency Control (Tcl)..................... - 2.5 Bus Clocks
RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks
Min RAS# active time (Tras)................... - 05 Bus Clocks
Row precharge time (Trp)...................... - 02 Bus Clocks
Row Cycle time (Trc).......................... - 7 Bus Clocks
Row refresh cyc time (Trfc)................... - 12 Bus Clocks
Row to Row delay (Trrd)....................... - 02 Bus Clocks
Write recovery time (Twr)..................... - 02 Bus Clocks
Write to Read delay (Twtr).................... - 02 Bus Clocks
Read to Write delay (Trwt).................... - 02 Bus Clocks
Refresh Period (Tref)......................... - auto Cycles
Write CAS Latency (Twcl)...................... - Auto
DRAM Bank Interleave.......................... - Enabled

DQS Skew Control.............................. - Auto
DQS Skew Value................................ - 0
DRAM Drive Strength........................... - Level 8
DRAM Data Drive Strength...................... - Level 3
Max Async Latency.......................... - 08.0 Nano Seconds
DRAM Response Time............................ - Normal
Read Preamble Time............................ - 05.0 Nano Seconds
IdleCycle Limit............................... - 16 Cycles
Dynamic Counter............................... - Disable
R/W Queue Bypass.............................. - 16 x
Bypass Max.................................... - 07 x
32 Byte Granularity........................... - Disable(4 Bursts)

yes i have dont all you mention beside 2T but i dont like my system to run 2T ....

i am pretty sure its compatibilty issue as previous i own KVR same symptom run dual channel computer ki siao. zzz

Thanks !

This post has been edited by horphi: Jan 17 2007, 06:13 AM

i think u can borrow a processor
and try run at defult setting
this might be your processor dunt like 1t

I rather run at default priority as I need to work with the comp also

memtest can't be trust? Its one of the most sought after tool for RAM stability my friend, be it DOS or Windows version, both are very accurate. For CPU, I will run both large and small ffts.

You want another stability programme will be running SuperPI 32M test, if your system is unstable, you will get get the "NOT EXACT IN ROUND" error

This post has been edited by shinjite: Jan 17 2007, 08:03 PM

just my exp la bro
cause i oced many com before
but pass super pi 32m and memtest not mean stable for me
cause some time will fail at sp2004 blend 9 also
and i try before many setting pass 32m and memtest windows / dos
but still bosd some time
so i run sp2004 blend 9
fail within 1min

All these tests doesnt mean anything to me. For example I OCCT'ed my setup for 12 hrs stable and 15 mins of FEAR / oblivion crashed it. Loosen the timings and fixed so these test doesnt mean anything in the real world.

Usually I usally use these tools to help find the possible stable setup and then use games to confirm.

See my result...

http://forum.lowyat.net/topic/399054

can this be ur power supply or heat problem?
cant handel when graphic card and oced proc on full load?
cause oc will affect every thing in ur computer
i agree test is not anything
the most important is performance and stable
like i feel more smooth play o2jam at lower ram clock and tight timming

i have traded my 2 pcs 1G Aeneon with another forumer as he also running 3800+X2 on Ultra-D. initially he can run 250Mhz without any problem, while i cant even run at stock.

Nope, i dont think so. On chapalang same results, on FSP Group 450watt stable rails (DMM tested) also the same result. Heat also not an issue, run the setup naked. It's ram timing. Even if I OCCT'ed the setup for 12hrs I still get random crashes in programs and games. Loosen timings fixed.

This post has been edited by seveneleven: Jan 19 2007, 08:24 AM

why dont you try sp2004 blend 9 test?
just my exp that pass many other test but might fail at
sp2004 blend 9 test cause blend 9 will use up all your ram and
to stress your cpu and ur ram
cause i facing same problem when i just bought the TCCD
finally i fixed by burn in more to my ram and setting with blend 9 test

so u may change a processor or ram to slolve your problem
i feel go for opteron batter than change ram

Well not all can perform the same
This ram doens't run that well on my Intel system, so just go with what you got
Initially AMD can get better results.....

Anyway, if u guys overclock and pass the SP2004, make sur go for 3dmark too and do the looping to make sure your RAM is 3D stable or play some games

This post has been edited by shinjite: Jan 19 2007, 06:02 PM

are those aeneon chip are similar to infineon ce-5? i can mix up this 2 chipset and running at 2-3-2-5 at 200Mhz@DDR400...

as i know those stick is use infineon ce-5 and remark as aeneon
and some qimoda 1gb stick also remark from ce-5
and qimoda and aeneon is under infineon

how can jian_yi's TRAS set to 0? sorry out of topic

mine passed memtest...

running 2.5-3-2-8 at 240Mhz@DDR333 2.8v

prime...last time i tried...got prob..not sure for now... forgot d

mie is Infineon CE-5

3-4-4-11

280 HTT 1 : 1 ....heheh ^^

but forgot to take screenies....

onli have this atm...
will upload later once my fren giv me back my Opty




Chow.

This post has been edited by bata: Feb 14 2007, 12:17 AM

Just want to ask how to know whether my Aeneon 1GB DDR400 RAM is using CE-5 chip?

how to do overclocking on it? can anyone post a guide please, newbie here..

before that i got saw got 1 forummer modded this Aeneon RAM to OCZ high performance RAM...should we do that to obtain better performance or just OC it then can get the performance d?

need some help here. thanks alot~~~

just got myself 2x1GB Aeneon DDR400

here's my overclocking - haven't start stability test yet...



i'm beginning to love this RAM module already, DDR560 , tried DDR600, though - couldnt load to windows , but still, this is only ValueRAM



haven't have a chance to run for stability, but played some games (BF2, Hitman : Blood Money, F.E.A.R, Far Cry, Half-Life 2) flawlessly...

This post has been edited by sniper69: Mar 13 2007, 06:54 AM

huh, I have try many pcs of 1GB Aeneon DDR400 modules, they can't run over DDR500 with CL3 on my Tforce6100-939...

frankly speaking, i haven't stress test both of them, just playing around and successfully booted and run flawless @DDR560 until i started gaming on that clock...decrease to DDR533 seems ok. @DDR550, primed...but after 7 minutes failed

Prime fails doesn't mean in gaming or application will fails. I tried this experience on my PC before.

yes, i have to agree with you...frankly speaking, i did ran on DDR566, in windows environment (web surfing, downloading stuff, watching movie/listening MP3) it's perfect, but when gaming, BSOD after 30mins~60mins game time...same goes to DDR533, but longer, 60mins~75mins on gaming before BSOD, now on DDR500 @3-4-4-8, flawless i must say...

Just for info, my Aeneon is presently running @DDR520 and stable like a rock , playing game and downloading for more than 5 to 6 hours non stop. prime for 12 over hours without any problem too. setting @3338 @2.6v but my smart guardian detect as 2.63v.

uuu...sweett!~

---

Added on March 31, 2007, 12:04 pmhey, can my hynix ram be overclock?

This post has been edited by aliex87: Mar 31 2007, 12:04 PM

just got myself a pair of aeneon 2x1gb
after my testing ds/dds 3/1 is best for my expert
able to do ddr540 3-3-2-5-1t 3d stable
and ddr560 3-3-2-5-2t 3d stable
trying 3-4-2-5-2t....

can i know what is your ram voltage and v core voltage. tq

all tested using 2.7v and 1.39 for my 144

hey gutys , i know im late in this party, but i just got my self two 1 gbs sticsk of quinonda , they are ce-5, and i love then man
ddr600 straight off the mark , with 3-3-4-10. abit loose but who cares, lol, i hit ddr620 just now but not stable

, i envy you, DDR600? damn you lucky... i think i'm gonna test it whether i can hit DDR620 as you , actually, tried... but failed, BSOD even before the logon screen...

are you sure, 3-3-4-10? AFAIK, 3-4-4-8 is the loosest, 3-3-4-10 is... i don't know... weird? but i guess, as long it work... should be all right...

true that the timings are loose , but its was just to c how high it could go, actualy i hit ddr 600 my mistake, i was finding ou the max of my ultra-d then i forgot to set the divider, when i loaded the memtest , to my suprise i go ddr600 staring at me, lolz... i just hit ddr667 ( 333mhz : DDR2 speeds ) with 3-4-4-9 tightened abit, can boot but not very stable
im ocing my rams now so m opty 144 is on a 6 multi and ldt is on auto. gona try to find the max cpu soon, hehe.... oh almost for got, im using 2.9v

getting a rdx200 soon, so ill have a better mobo for the rams soon....wana c how high it can reach.

btw my bios is the new one 406 iirc
p/s im using systools to oc, thats y i still can go to lyn...lolz

This post has been edited by lolhalol: Apr 26 2007, 04:32 PM

nice... but it is better for you to take her for a torture test... , playing some heavy 3D games (F.E.A.R, Half-Life 2, Oblivion), 3DMark, Priming her, see what's she can do...

nah bro, i jsut fresh installed xp, no games. now im tuning the timings , using the guide from dfistreet . dam usefull, all the stting they explain... neway i will post up screenies tonight with my final results. i dun think at these speeds can torture test, confirm fail..lolz
but yesterday i loope 3dmark06 10 times for my whole system 320mhx*9@2.9ghz opty 144 @ 1.36v, rams at ddr600@ 3-3-4-9 @ 2.9v chipset @ 1.7v perfectly stable..lolz
man these rams are amazing

This post has been edited by lolhalol: Apr 26 2007, 04:41 PM

well, that's sounds promising... , 2.9GHz @stock, DDR600 @3-3-4-9 @2.9vDIMM, nForce4 @1.7v? kinda high i think... what's your chipset temp anyway?

yeap, this RAM is amazing, i second that...

im using the king of chipset coolers thats y i can push higher voltage, hr-05, yesterday my chipset temps were at 32 under full load, nice ehh... lol beats the hell out of the stick cooler , at stock voltage idel was already almost 37 degreess,....dam thing sucks...

, owh... no wonder... FYI, i dreamt bout getting this HR-05 SLI, but i wonder how will it fit into my system because, from what i can see, the HR-05 SLI surely get blocked by my X1900XT... damn it ...

*** Off Topic *** warned...

This post has been edited by sniper69: Apr 26 2007, 05:46 PM

some bad new man . yesterday while clocking my proc, i acidently curupted my bios, now i hav no choice but to get a new board or wait for a new bios chip, dam, was saving the profile into cmos reload, (ddr667) then psu shut off unexpectedly, now i cant go into the bios, but i can load windoews, wierd .....

, AFAIK, overclocking in BIOS won't do any damage to our BIOS, even physically... , kinda new to me... did you do some hard-modding? vMOD?

no, i thinks its coz when saving into the cmos profiles , and u switch off power , it currupts the bios, much like how if u save a file on ur PS2 memory card, and u switch it off half way , data gets damaged

Infeneon made a very special ram
from me research i see that some ppl can run it @
3v cl2-3-2-5 ddr466
3v cl2.5-3-2-5 ddr500
2.7v cl3-3-2-5 ddr550
it seems that a combine of UCCC and BH-5
can be low voltage like samsung ram
tight timming and high voltage like bh-5
loose timming and high frequency like UCCC
always be cool even on high voltage high frequency compair to TCCD or BH-5
high voltage seems not for highter frequency but for tighter timming

Just curious to know, how many point did you get for memory test in sisoft sandra men test.

seems like most people here doing DDR500 and above eh...
I must try to crank it up later maybe

i don't know, just wanna show off , but i can get DDR533, no sweat ...

Hi guys, wanna ask if your menory stable with say 7900gt vga card, can it be stable with 8800gts, becos i have to loosen my menory timing when i upgrade to higher vga card.

AFAIK, there's nothing to do with system memory timing with graphic card memory timing...

yeah man.... should hav no problems wen upgrading ur vga...neway i can hit ddr600 with my old ultra-d.... i got an expert coming tomorow..will try to hit higher ..... i think my mem can do ddr333.... , last time i did on my ultra-d ...was almost stable, but i blew the bios chip...haiz....

I get frustrated with my 8800gts even without oc it sometime just freeze or even bsod, so i have to loosen my system ram timing and even increase voltage, so as to get more stable. or anyone can tell me what is the fault, is it my vga card having problem. in fact i have change so many vga card this is the first time i encounter such problem.

done with my infeneon ce5


a screenie for u guys with my rams.... tell me im not seeing crazy numbers...

This post has been edited by lolhalol: Jun 2 2007, 10:00 AM

hey bro, mind to tell us ur settings?

wow nice there
voltage ?

a little update on my babies...... my last clock before they were shipped of to the new owner...





i didnt have windows installed so could do nething .... hdd died.... stupid western d....

This post has been edited by lolhalol: Aug 16 2007, 12:30 PM

i got a customer using WD HDD tat survived Rat's pee and dropings...

Just got myself 2x1GB Aeneon PC3200, dunno use what chipset, AED937500, year 06 week 44. Currently prime 240 @ 2.5-3-3-8, 1T.

623-2BTA BIOS w/ yellow slot.



will tweak more after final exam, now have to prepare for exam

This post has been edited by gsan: Oct 20 2007, 08:03 PM