for my exp find out ur proc max fsb use sp2004
then run sp2004 blend stress test priority 9
and set fsb and timming with clock gen and a64 info or memset
run more than 2 hour sp2004 blend stress test priority 9 for 24/7 setting
for me memtest cant be trust any more...i just use it for burn in the memory

This post has been edited by skydna: Jan 16 2007, 05:26 PM

yes it will more stress when set to 9 but just dun try 10
so will fail faster if unstable
cause when set to 10 ur system nearly not respond to you already
system will 100% consentrade to the sp2004

This post has been edited by skydna: Jan 16 2007, 10:38 PM

i think you can try
-set the DS and DDS (normally set 8 and 3)
-set tref (normally set 4708 or 3120)
-overclock at 2.4~2.5v
-change slot
-run at 2t

i think u can borrow a processor
and try run at defult setting
this might be your processor dunt like 1t

just my exp la bro
cause i oced many com before
but pass super pi 32m and memtest not mean stable for me
cause some time will fail at sp2004 blend 9 also
and i try before many setting pass 32m and memtest windows / dos
but still bosd some time
so i run sp2004 blend 9
fail within 1min

can this be ur power supply or heat problem?
cant handel when graphic card and oced proc on full load?
cause oc will affect every thing in ur computer
i agree test is not anything
the most important is performance and stable
like i feel more smooth play o2jam at lower ram clock and tight timming

why dont you try sp2004 blend 9 test?
just my exp that pass many other test but might fail at
sp2004 blend 9 test cause blend 9 will use up all your ram and
to stress your cpu and ur ram
cause i facing same problem when i just bought the TCCD
finally i fixed by burn in more to my ram and setting with blend 9 test

so u may change a processor or ram to slolve your problem
i feel go for opteron batter than change ram

as i know those stick is use infineon ce-5 and remark as aeneon
and some qimoda 1gb stick also remark from ce-5
and qimoda and aeneon is under infineon

just got myself a pair of aeneon 2x1gb
after my testing ds/dds 3/1 is best for my expert
able to do ddr540 3-3-2-5-1t 3d stable
and ddr560 3-3-2-5-2t 3d stable
trying 3-4-2-5-2t....

all tested using 2.7v and 1.39 for my 144

Infeneon made a very special ram
from me research i see that some ppl can run it @
3v cl2-3-2-5 ddr466
3v cl2.5-3-2-5 ddr500
2.7v cl3-3-2-5 ddr550
it seems that a combine of UCCC and BH-5
can be low voltage like samsung ram
tight timming and high voltage like bh-5
loose timming and high frequency like UCCC
always be cool even on high voltage high frequency compair to TCCD or BH-5
high voltage seems not for highter frequency but for tighter timming