Outline ·
[ Standard ] ·
Linear+
Aeneon 1GB DDR 400 Discussion Thread, Owner Please share
|
p0kteh
|
 Jan 11 2007, 03:13 PM
|
New Member
|
QUOTE(horphi @ Jan 11 2007, 11:33 AM) Aiks . seen like my Pair cant go for tigh timing. 225Mhz@ 2-3-2-5 wont stable, even with CL 2.5 .... must be something wrong with me....
but its able to prime at 260Mhz 3-3-3-8 with 2.7v
and too bad my 3800x2 manchester cant hold that clock......
need time to find max speed for my Proc and tighter Ram timing
Pokteh wat bios version you using on ur Ultra D mind to PM me your Bios bios 623-3.. ( for my TCCD 512x2 ) prime for 1H30min @ 2.5 3 2 6 250Mhz now running @ 2.5 3 2 5 @ 240Mhz This post has been edited by p0kteh: Jan 11 2007, 03:16 PM |
|
|
|
|
|
p0kteh
|
Jan 12 2007, 07:26 AM
|
New Member
|
|
|
|
|
|
|
p0kteh
|
Jan 13 2007, 12:47 AM
|
New Member
|
QUOTE(lichyetan @ Jan 12 2007, 07:05 PM) can anyone post the result of these ram in DFI expert board? all the small details such as drive strength so on... i cant do 250mhz for da ram... wat is the voltage limit of these ram>? ocz limit their voltage @ 2.9V same chipset .. *never pump my ram > 2.8V |
|
|
|
|
|
p0kteh
|
Jan 15 2007, 09:25 AM
|
New Member
|
QUOTE(Hungry_Wolf @ Jan 14 2007, 01:52 PM) what is MAIN the possibility when u can pass memtest for > 8hrs but u cant logon to windows? QUOTE(horphi @ Jan 14 2007, 10:09 PM) im having same problem i can pass memtest for 10 hr . but get blue screen when get in windows SOMETIMES ONLY. And i was unable to go in Windows VISTA at all Guys what Color Dimm you all using. i think u shd find out what the stability of ur pros since u already known for the ram... http://math.gogar.com/athlon64.cgi?htt=300&showtable=1http://math.gogar.com/athlon64.cgitest test test..  This post has been edited by p0kteh: Jan 15 2007, 09:26 AM |
|
|
|
|
|
p0kteh
|
Jan 16 2007, 09:08 AM
|
New Member
|
QUOTE(horphi @ Jan 15 2007, 07:28 PM) i have even more weird. i have pass memtest >8hr 250Mhz 3-3-3-8 2.7V , 260Mhz 3-3-3-8 2.7V but fail to boot windows. now 225 3-3-3-8 fail memtest #5  with 2.6v , 2.7v , 2.73v , 2.63v ram on orange slots ? |
|
|
|
|
|
p0kteh
|
Jan 16 2007, 11:59 PM
|
New Member
|
my setting @ 240Mhz
bios 623-3
DRAM Configuration Settings:
DRAM Frequency Set............................ - 200
Command Per Clock (CPC)....................... - Enable
CAS Latency Control (Tcl)..................... - 2.5 Bus Clocks
RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks
Min RAS# active time (Tras)................... - 05 Bus Clocks
Row precharge time (Trp)...................... - 02 Bus Clocks
Row Cycle time (Trc).......................... - 7 Bus Clocks
Row refresh cyc time (Trfc)................... - 12 Bus Clocks
Row to Row delay (Trrd)....................... - 02 Bus Clocks
Write recovery time (Twr)..................... - 02 Bus Clocks
Write to Read delay (Twtr).................... - 02 Bus Clocks
Read to Write delay (Trwt).................... - 02 Bus Clocks
Refresh Period (Tref)......................... - auto Cycles
Write CAS Latency (Twcl)...................... - Auto
DRAM Bank Interleave.......................... - Enabled
DQS Skew Control.............................. - Auto
DQS Skew Value................................ - 0
DRAM Drive Strength........................... - Level 8
DRAM Data Drive Strength...................... - Level 3
Max Async Latency.......................... - 08.0 Nano Seconds
DRAM Response Time............................ - Normal
Read Preamble Time............................ - 05.0 Nano Seconds
IdleCycle Limit............................... - 16 Cycles
Dynamic Counter............................... - Disable
R/W Queue Bypass.............................. - 16 x
Bypass Max.................................... - 07 x
32 Byte Granularity........................... - Disable(4 Bursts)
|
|
|
|
|
Quote
0.0184sec
0.30
7 queries
GZIP Disabled