All Owner mind to share your Aeneon 1GB DDR 400 (CE-5) overclocking result here ?

Me first


Able to Pass Memtest 260Mhz with 2.7v (lose timing) 3-3-3-8

I having diffucities to lower the Cas Latency even with CL 2.5 @ 225Mhz wont stable. Worst is my Manchester 3800x2 cant stand at this HTT

How you Guys Tweak your timing.


Thanks for Sharing in Advance


LOL Pai Seh , and this make more ppl come in

This post has been edited by horphi: Jan 11 2007, 04:29 PM

threat = ancaman

lolz!

Wait till I get mine tmr then I post

Fuah, U wan to Give warning sama Orang ar?
Threat...

Dude.Thread lar.. not threat
forumers see already oso scared

, i see a threat...
anyway, i wonder this RAM module's chip same as Kingston HyperX PC3200, FYI, i can't go higher speed even though loosen timing...

bios 623-3.. ( for my TCCD 512x2 )
prime for 1H30min @ 2.5 3 2 6 250Mhz
now running @ 2.5 3 2 5 @ 240Mhz

This post has been edited by p0kteh: Jan 11 2007, 03:16 PM

gud job there bro! 250 @ 2.5-3-2-6 is just as gud as those premium ram...

wow. cool


mind to share Vdimm ?

250Mhz @ 2.5 3 2 5




This post has been edited by p0kteh: Jan 12 2007, 08:00 AM

These r infineon/Aeneon BE/CE series...they r indeed used in performance RAM. The only 1GB module better than these r Microns...

Looks like AMD boards get better speeds
I can't even get into Windows at 250Mhz 3-3-3-8

Currently running at 230Mhz 3-3-3-8, double priming, so far no errors

Nice....what mobo u using?

I only able to get 249Mhz-250Mhz wit 3-3-3-8
Using MSI Neo2 non-platinum edition

can anyone post the result of these ram in DFI expert board? all the small details such as drive strength so on... i cant do 250mhz for da ram... wat is the voltage limit of these ram>?

Any Intel users here?
Post your results, I can't stable at 250Mhz 1:1 3-3-3-8 at all

currently, i am running at 225FSB, 1:1, 2 3 2 5, 2.7vdimm.

been using that for days. never faced any problem.

its normal lar. my P4 3.0e totally cannot go in windows at all with these timing.
only thing that i can do is running back to 200mhz with timing 2.3.2.6. MAX can only do at 220mhz with 2.3.2.6 but the PROC temp super HOT!!! reach 60c++

haiz.. intel is like that wan lar...

err fren can i ask u some question when u reach 225fsb,playing game like CARBON,will u get articfact.
cause my PROC very alien wan reach 225fsb articfact coming out. haha and my GC are runing stock speed.

ocz limit their voltage @ 2.9V same chipset ..
*never pump my ram > 2.8V

its ur RAM problem, not ur GC

irangan, mine can boot at 225Mhz 2-3-2-5 but memtest86 got errors so don't bother tighting it. Currently on 227Mhz 2.5-3-3-6 2.7VDimm

Hmmm...I found something weird, maybe its for Intel users or solely from my board

Lets say that 235Mhz 3-3-3-8 at 2.8Vdimm and 1.65Vcore in BIOS 1:1 with processor 235Mhz FSB, it can boot and run benchmarks no problems but memtest86 will show errors BUT I manage to eliminate that by apply more CPU voltage to a higher amount >.>"

How about other Intel users? Same thing like mine? Need to pump up the juice just the stabilize the memtest86?