I want to buy 2 pieces of 120mm fan from here, between Xigmatek F1254 and CM (R4-C2R-20AC-GP), which one is better?

Using CM Storm Scout, add to the side panel fan, too cool my GC which blow hot air into my case, the case is hot every time I play games

Wanna know who is using silverstone suscool 12mm system fan? how to maintain fan in highest speed?

the design is damn good but the speed is damn slow

i already remove the temp sensor but the speed highest can reach 500rpm but most of the time just between 100rpm tp 200 rpm..

This post has been edited by okboy: Jun 13 2010, 10:03 AM

can anyone recommend me a casing fan around 30 bucks but dem quiet one. fan speed doesnt matter my pc isnt very powerful, i just want air flow cause i put my pc in the cupboard. going to mod the cupboard.

Any fan from CM, Xigmatek or Deepcool would do just fine, my choice is Enermax Cluster 120mm fan, it's beautiful & quiet. You can remove the blade only if you want to clean it, no need to remove the whole unit from the casing. But this fan is a bit expensive, about RM50.

---

Added on June 21, 2010, 6:57 pmIs it really that slow? Have u ever try to connect it with the fan controller and max it speed?

This post has been edited by dulux78: Jun 21 2010, 06:57 PM

between xigmatek f1254 n cm, cm would b better but xigmatek has led while tat cm doesn't has any led. if u r not looking for any led fan then go for cm.

side panel usually is intake fan but in some case like urs then u try to put it as exhaust fan so tat the heat from ur gc will b suck out instead of blown into ur casing.

silverstone suscool the speed is tat fast only if i'm not mistaken. u can try to connect the 3/4 pin power through ur motherboard then u can adjust the speed of the fan. then u try to adjust to the max.

RM30 i would say go for Cooler Master 120mm 90CFM fan although it is not 90CFm but it is a good budget fan.

Cooler Master 120mm 90CFM fan is good, the airflow is quite strong but the problem is it will collects the dust twice faster & more than other fans.

d sickle one?
hv to put filter...i cleaned mine 2 weeks ago n its already dusty
even got dust on my radiator fins
hv to clean it again

those fans have weak pressure on them.. but i'll guess you'll be fine as long as u dont use it on thick rads (XSPC RX,Feser,Thermochill..etc2)

onli cooling cpu...it will do
need something better if planning to wb nb n gc...planning,mmmmmm

Scythe GT.. the best

anyone know where i can buy crossflow fan?
(even shops in jln pasar will do)

yeah,one of d most expensive

very good for ur ears what haha..

with great power.. comes great responsiblity..

How expensive? is it noisy?

if to choose between Scythe GT n Arctic Cooling fan, which one is the better fan( for radiator, cpu heat sink), so in tat case, high static pressure is more important thn the CFM. wat say u?

This post has been edited by selferino: Jul 5 2010, 09:33 PM

can ask bro alvin@clawhammer
sell both gentle typhoon n arctic cooling
last time also kena poison

im using coolermaster fans for my swiftech 360 rad...idle 29-31'c @3.675GHz...cant run prime95 on this speed but no bsod

other thn GT n arctic cooling, any good enermax fans tat have good static pressure? they have so many models, duno which is is the best, ( again, for radiator, cpu heat sink)

http://www.overclockers.com/65-fans-tested-megahalems/

radiator need higher static pressure fan than heatsink.

yeah but im using tuniq tower 120 extreme, the one where the fan is located in the center n INSIDE the heatsink, imagine tat man, special case man, summore then fins of this particular heatsink (the fins spacing) is so close by each other, check out the pics at the net thn u will understand, plus wanna water coll in the future..

how much for transparent case now?
can i get it with rm150?