if i put 2 fan togather,same flow,same fan
will increase the air flow anot ?

some say yes..some say no... some say it will be even worse.

but if u take the delta GFB as an example... its basically 2 fans stacked up on 1 another...BUT with the blades rotating in opposite directions if im not mistaken...
i dont think thats what he meant....he probably means stacking 2 fans together

hello guys. ive yet to flip back all the posts in here but i would like to share something about some of my case fans weirdness.

i have 2x12cm 90cfm blue led fan and 2x20cm cm blue led fan. the 12cm fans are exactly identical and so do the 20cm fans. the thing is, one of my 90cfm fan, the leds are normal ; deep, dark blue-purplish glow but the other 12cm fan, 3 of its leds are sort of light blue with some greenish glow.

the 20cm fans, one is good, the leds are deep, dark blue glow but the other 20cm fans, only one of them are the ok while the other 3 leds have light blue with greenish glow.

ive tried snapping some pictures but my handphone camera cant pick up the difference. ive opened up a thread about this yesterday in the hardware section and a forumer noticed the same thing too with his/her cm fans. the thread is closed now and ive been pointed out to ask in here. another forumer pointed out that there are different type of leds manufactured, and while they are said to be the same colour, they differentiate just a little in the glowing/intensity of its colour.

is there a possible way to rectify this glowing difference? its happening with my cm fans but not with my xigmateks. their leds are always uniform in colour intensity and glow.

other thn GT n arctic cooling, any good enermax fans tat have good static pressure? they have so many models, duno which is is the best, ( again, for radiator, cpu heat sink)

yeah but im using tuniq tower 120 extreme, the one where the fan is located in the center n INSIDE the heatsink, imagine tat man, special case man, summore then fins of this particular heatsink (the fins spacing) is so close by each other, check out the pics at the net thn u will understand, plus wanna water coll in the future..

magma has bad static pressure thn sickleflow?
http://www.enermax.com/home.php?fn=eng/pro...=4&lv1=13&no=32
it says here its has static pressure of 1.400(GT has 2.03 thou )..sicleflow has   2.94 mmH2O(i think its bullshit)

haha dun worry reiben, the GT tat they use in the review is the 1450 or 1480 rpm(cant remember) speed, im sure ur using the 1850 rpm GT, like me

First of all, are you a guy?

If yes, please proceed to here and PM Mr. Alvinn
(Of course you must let him know that you are a guy)

If not, then I guess the next best place is to buy it from LYP @ ATE.
(Assuming you are female)

Encik Alvin tu playboy sikit ..

perempuan dapat murah2 punya price XD lol..

ask your gf to buy those for u from him haha