Apr 2 2016, 04:40 PM
QUOTE(eq8all @ Mar 31 2016, 08:52 PM)
Flashing is similar to formatting. So root would be pointless as that will get wiped as well.
1. Preparation
a~ Make sure your PC is running on an x86-64 = 64 bit OS w/e Win 7, 8, 8.1 or 10. This is crucial.
b~ Read this 1st. We'll get back to it.
c~ Now go to this link, yes 1st download that .exe file in Step 1 it's the installer for MiFlash and then scroll all the way down until you can see "Redmi 3 Latest China Developer Version Fastboot File Download" and click that. Let these finish.
d~ While you're at it, begin backup take out your micro SD + SIM reinsert the flap and move w/e data gf pics etc to your PC.
e~ now when the downloads are done, go to c:\ create a new folder keep it simple name it to ayam. Extract the fastboot file from .tgz -> .tar and then again until it's a folder. Go into this folder select all then cut and go back to c:\ayam then paste.
f~ remember step 1b above? yes follow that link, read, do and install MiFlash after you rebooted into the disabled driver sig verification environ. Make sure that you right click run as administrator on the .exe and when you see the warning dialogs just ignore and select install this driver anyway.Continue installation until it's finished. Done and reboot.
2. Flashing
a~ Turn phone off, press Vol Up + Power hold until it boots to a weird looking recovery. Select tap on Download. Then it'll be blank screen don't panic that's just how it is. Put the phone aside for a bit.
b~ By now MiFlash should be available on your Start screen so right click on the shortcut run as admin.
c~ Connect phone via USB cable once MiFlash is launched and double check by clicking on Refresh button. If it shows a COM10 entry below then it's good.
d~ now click on Browse button locate c:\ayam
e~ then click on Flash
f~ IF it's successful congratulations now can proceed to step 3
3. PM me so that you can transfer my coffee fund laters
Good luck...
bro i have successfully installed it but where do i find my app store???1. Preparation
a~ Make sure your PC is running on an x86-64 = 64 bit OS w/e Win 7, 8, 8.1 or 10. This is crucial.
b~ Read this 1st. We'll get back to it.
c~ Now go to this link, yes 1st download that .exe file in Step 1 it's the installer for MiFlash and then scroll all the way down until you can see "Redmi 3 Latest China Developer Version Fastboot File Download" and click that. Let these finish.
d~ While you're at it, begin backup take out your micro SD + SIM reinsert the flap and move w/e data gf pics etc to your PC.
e~ now when the downloads are done, go to c:\ create a new folder keep it simple name it to ayam. Extract the fastboot file from .tgz -> .tar and then again until it's a folder. Go into this folder select all then cut and go back to c:\ayam then paste.
f~ remember step 1b above? yes follow that link, read, do and install MiFlash after you rebooted into the disabled driver sig verification environ. Make sure that you right click run as administrator on the .exe and when you see the warning dialogs just ignore and select install this driver anyway.Continue installation until it's finished. Done and reboot.
2. Flashing
a~ Turn phone off, press Vol Up + Power hold until it boots to a weird looking recovery. Select tap on Download. Then it'll be blank screen don't panic that's just how it is. Put the phone aside for a bit.
b~ By now MiFlash should be available on your Start screen so right click on the shortcut run as admin.
c~ Connect phone via USB cable once MiFlash is launched and double check by clicking on Refresh button. If it shows a COM10 entry below then it's good.
d~ now click on Browse button locate c:\ayam
e~ then click on Flash
f~ IF it's successful congratulations now can proceed to step 3
3. PM me so that you can transfer my coffee fund laters
Good luck...
Quote
0.0322sec
1.33
6 queries
GZIP Disabled