"Edit (14/10/2017): You need to login with master ID and password as standard admin ID will NOT show you all the settings needed for this configuration. Master ID and password is model specific, you can easily find it on google."

Hi I tried all username and password but couldn't get through.. can u give me a specific username and password? thanks.

I'd been looking for a guide online to set up the UniFi HyppTV Set Top Box EC6106V5 to connect wirelessly without spending extra money to buy a pair of HomePlugs as HyppTV STB EC6106V5 has already got WiFi built in to the box, you only need to go to the settings to enable it to connect to your WiFi network. Unfortunately, there isn't much helpful information I could get from the internet, so I decided to go through all the settings in the router myself to find out if there is any possibilities to do so, and finally I found that IT'S ALL POSSIBLE!!! So now I can have my router in one room, and HyppTV STB and TV in another without having to buy any extra hardware as long as it's within the WiFi coverage range.

After the successful attempt, I feel like I should share this to others, so you all can save some money and place your TV set wherever you want.

I will skip the steps to enabling and connecting to WiFi network in the Set Top Box as it's already available on the internet for quite some time. So I'll go straight to the point, and below is the step by step set up guide.   

Edit (14/10/2017): I'm getting forum messages from time to time where people ask for details regarding the setup, so I think it's better for me to just update the post with a bit more details in case people couldn't find the specific information needed.

Edit (14/10/2017): I've since upgraded the Set Top Box to EC6108V8 and a different TM router model after the first post, but most settings remained the same as before. Note: I haven't got a chance to play with the newer TM D-Link DIR-850L router, so I'm not sure if some of the settings are actually available in this router.

Edit (14/10/2017): To enable WiFi connection in the HyppTV Set Top Box, go to the settings page through the cog icon at the screen when you first power on your HyppTV STB, then go to Wireless and Network section, tick the box on the right of Enable WLAN and wait for the STB to turn on the WiFi feature, once the WiFi is on, go to Set WLAN to choose and connect to the WiFi network SSID you're going to create from the guide below.

1. Log in to your UniFi router, username and password is readily available online.

Edit (14/10/2017): You need to login with master ID and password as standard admin ID will NOT show you all the settings needed for this configuration. Master ID and password is model specific, you can easily find it on google.

2. Go to Wireless tab and then SSID Configuration, enable second SSID in the list by clicking the Edit button.

http://i.imgur.com/vznXEFC.jpg 

3. In the VAP configuration page, tick the Enabled VAP box to enable second SSID, and you can enter your own SSID name in the SSID box. Under Wireless Security, you need to select WPA-PSK as authentication, as WPA2-PSK won't work in streaming the IPTV signal. Under Enabled WPA, select TKIP as the Key Type, AES will work too, but I find TKIP having a smoother streaming result. Don't forget to enter your own Preshared Key too.   

Edit (30/11/2015): I've tried to use the so-called 'mixed mode' WPA-PSK/WPA2-PSK Authentication with TKIP + AES Key Type without any streaming issue so far. With these settings, it should give better security to your WiFi network.

Edit (04/12/2015): WPA2-PSK Authentication is actually WORKING for streaming IPTV signal, I've so far tried both WPA-PSK and WPA2-PSK with all Key Types combinations available in the router's settings, some combinations have better streaming results than the others, so you might try out yourself to find the best one for your network conditions. Still not sure why it didn't work the first time when I set up the SSID2.   

http://i.imgur.com/xclIAAT.jpg 

4. Click Submit button at the bottom of the page to save settings.

5. Now go to Setup tab and then WAN Configuration, edit the connection with VLAN ID 600. It's the notepad icon with a pen on it, NOT the icon looks like a recycle bin.   

http://i.imgur.com/IQVpAmw.jpg 

6. In WAN Connection settings, under Port Binding, tick the box SSID2 for WLAN Port.

http://i.imgur.com/tsOCBbM.jpg 

6. Click Apply button to save settings, and Viola! you can now stream your HyppTV content wirelessly when connecting to this new SSID!

Please note that this is only for streaming HyppTV contents, browsing internet with the browser won't work in this configuration. The new STB EC6108V8 should work with the similar settings, but not tested myself. Hope you guys enjoy it. 

i wonder if wifi extender Tl-WA850RE can connect to hypptv?

Anyone knows where to buy this white box and what's the ideal price?

Anyone knows where to buy this white box and what's the ideal price?

Is there any issue like stuttering when you connect it via wifi? esp when u play FHD

Once in a while, but most of the time it is smooth for me. Using 50mbps line here.

Hi

ur stb is Huawei EC6108V8? can i know u use which router?

is the distance between stb and router far away like in different floor?

because i notice sometime the stb wifi reception is quite weak and will get stuttering due to wifi congestion, especially during peak time where everyone around is using it.

Yes the same stb and using mikrotik RB952Ui router.

Stb and router on the same floor. Stb in my room and router outside. I reserved the 5Ghz for stb only. But yea when I tried with tv downstairs, reception is weak and will get stuttering too.

Once in a while, but most of the time it is smooth for me. Using 50mbps line here.

In my town there is no tm unifi yet. But we still can register for unifi lite - 10 Mb/s. With lite we can only watch unifi tv (hypp yv) using mobile phone (cant watch on tv) since there is no set top box provided by tm.
.
Can we buy the top box from the shop and use it to watch unifi tv and estimated how much does it cost?

Please help me. I have zero knowledge in this. Tq