mine scream when it not so hot. after driving a while the sound gone. ure using bendix?

Go to any spare parts shop and ask them for bumper plastic clips. They should be around RM2 or less per piece. Your wheel arch cover is loose and rubbing on the tyre when you're driving.
Not sure about T-IV, I would go back to SP3 as soon as possible if I were you, or use synthetic ATF which is compatible with gearboxes that use SP3.

usually outside workshop, they will tell u all atf same de, all engine oil same de.
engine oil cheap give u 20w50 mineral, medium ok sikit 10w40 semi, bagus 5w40 fully. brand can be any unheard brand, cap harimau also got.

What brand of brake pads r u using? Still stock pads?

My trestor metallic plus so far so good, ever since changing to it, when braking never once it screams, so dam quiet.

u usually go to zordaq bro? i want to change my timing belt there but wrong timing. there are a lot of cars need to be settle by them. ended up go to glenmarie to get the timing belt and ask local workshop to install it for me. then charge rm120 for labour. total was RM 4xx

Guys, pls watch this video see issit iafm sound or just normal sound ?

Really? Thank God. But now I'm in workshop..jz nw reversing to the left den when I brake, got loud sound...damn..

Screeching sound is high pitch right ? It's not high pitch when k hear it..something like trumpet sound..duno how to describe properly but its really loud.. Now they helping me skim my disc brake...see how it goes

I took some time to apply some synthetic lithium grease to the back of the brake pads for the front since the morning groaning noise was way too much after the insulation layer got removed. For now my brakes do not groan loudly anymore early in the morning, and even without warming up, when the car closes to a halt, the brakes hardly groan as well. If it stays like this, I'll probably get some proper brake grease to replace the current one since it's only rated for 200+ Deg C.

no harm cleaning, takes 5 - 10 mins job do yourself with a person playing the throttle and on-off ignition...
"toto" body, got toto lottery number craved inside kah? lol 

http://serbamaneka.blogspot.my/2014/04/ber...ntrol-cara.html

need to act fast before it snap close after 8 second. so do for a few time instead.

Did you bed the brake pads properly? If they are new and they are squealing occasionally you might just need to bed them by going beyond 80KM/H and applying the brakes moderately hard until the vehicle almost stops, then repeat the cycle a few more times.
I suspect it's just the mountings. Probably still won't be as vibration free as when the car was new due to engine eraser and tear but it should eliminate most of it.

1. Better brake pads
2. Better tyres

Then move on to whatever you want.
I mean not much difference from the original rear anti roll bar. For my car the larger anti roll bar also seems to have introduced some metal flex/creak noise which occurs from time to time when turning.