Mudah.my got plenty. Price depends on your negotiation skills 

mau koner 150km/h ka? 
Achilles Platinum 13" or Yokohama Blue earth kindly call Kent a.k.a nestum https://www.facebook.com/KeanLeeHin/
https://forum.lowyat.net/index.php?act=ST&f...0#entry23944116
if Puchong area call Kenji Lew. want hp number pls PM.
if North, just buy Goodyear Duraplus.    afaik not much choice at North

U is sure ka? Achilles 123 masih ada juai kat luar?

Update on the exora's head unit.

I was right on the ISO connector being the same. Everything works like a charm in the terms of sound, power etc.

The mounting however, doesn't fit. The stupid design of the exora's clarion has a slight angle upwards to it. It's not a normal double din. It fits in our center console with our original mounting bracket. But the centre console piece that goes into doesnt fit back.

Thank god I brought all my tools before meeting yhe seller. I took off with the head unit. And I tried putting everything together in my Saga in the 1km vicitnity of the seller. After I knew, it won't fit. I packed everything up and text him for a refund as it doesn't fit. Thankfully the nice guy accepted it.

I offered him to refund me only rm100 as to rm110. He initially wanted to give the full amount but I insisted.

There goes my dream of having an OEM looking player in my Saga.

No understand how it not fit. U mean the facia plate slanted on the EXORA unit? How bad the slant is? If I were to cut the centre console holder, will it still fit? Ayam also not very hepi with my current setup since got a big lobang, but I don't mind if there's a proper unit that fits well where I can cut the centre console holder to fit.


Belanja die je ke? Yg lain?

HWL I used last time is HiLo only not even bodyshift. 8K front 6K rear. If for street and once in a blue moon touge runs and got fetch people rear use 4K coz 6K will be bumpy. HWL is twin tube design so it has more comfort than monotube/inverted monotube type. Being that said I have used my HWL in track before in Sepang, Elite and MIMC respectively they perform quite ok given that it is only a HiLo. The rear shocks started to leak after 1 year both leak together. Due to it is not a bodyshift type adjustable the spring will unseat from it's spring cup or perch if the car is jacked up on jacks so at times after the car come back down from the jack and the 1st time you turn the steering there will be a loud TUK sound. That's the spring sound it seated back to it's proper place. Also the HWL is a long stroke absorber. Due to the spring unseating issues I DIY a solution to this. I install a pair of helper springs to keep the spring at the preloaded state so that it won't get unseated when the car is up in the air. With this setup I lost some height adjustment I can't go lower than 2 finger gap at the front.

Fast forward, I'm now using Ftuned which is a totally different system from HWL so to compare it to Ftuned is kinda like comparing a normal apple to a fuji apple.

The front are inverted monotube rear monotube. HiLo Soft/Hard with bodyshift. Inverted monotube has greater ability to take side load compare to monotube and twin tube. and it reduces the unsprung weight of the car. It has bigger pistons and will withstand higher temperature. Of coz with such a setup comfort was not really in the picture couple that to a pillowball mount I would safely say comfort is thrown out to the sea. Performance wise it is much much better as it is tuned for race competition use. As with inverted monotube the soft hard adjustment is at the bottom so it took me a while to get used to the direction of the damping. The rear are monotube design, damping adjustment on the top. I'm now running 8K front 5.5K rear.

FTuned has different range for different use so for the normal and occasional spirited drive just get the Road-touge, or road-track is fine. Race-Comp is top of the line. The difference between the 3 although the construction are the same is the valves and shims inside are setup differently. I was very happy and proud that Farouk himself was willing enough to show me how these valves and shims changes the characteristic of the damping. They also have non inverted monotube range

If you are really interested with FTuned give Farouk a call or make an appointment to visit his shop, He's a really nice guy guaranteed. The after sales service was very good and personal. Quality of the suspension system is also very top notch. 

Good things are meant to be shared.

Move ur head its the best solution.

Nice thanks, because I did noticed my oil temp at 95-96 like that. Using RedLine Oil 5-40

OBD2 reader. I'm using a bluetooth one.

I'm sorry but as far as I know, we can't read oil temperature from an OBD2 reader as our gaga does not have an oil temp sensor and to be able to read oil temp from oil temp meter, we will need to get an oil temp sensor (or sometimes it comes together with the oil temp meter).

Could you have mistakenly referred to water temp instead?

Or could you share the exact ODB2 unit and the software/app you're using ?

1st gen IRIZ SEDAN is actually SV leftover stocks   pepel rage potong penipu scammmer 
i think that one use blm punya carriage but plonk in new engine & gb for test je kot

How did you diy the back connector of the HU? Cut and splice or you bought a harness adaptor?

I'm thinking of picking this up.

[attachmentid=5734427]

http://www.lazada.com.my/sony-dsx-a35u-mp3...er-4818699.html

i encounter same difficulty last time, so i took a piece of thin wayar and used as a probe. 1 end tie to the speaker wayar, the other end push thru the lobang, it will be much easier

Just ordered the sony head unit for 158. 

Every time I see your post, mesti kena poison.

Will diy sometime next week.

nice! the wire guide helped much better right?
did u take photos of the speaker install? i would like to see it

you can try 2 ways, 1 is slightly potrude the player out a little so can fit the cover. or another way, take paper put at top part of player, trace the curve part out. then with that paper can mark on the cover. den use dremel/grinder/sander to mould to the curve shape? a bit time consuming, but it might help to fit the cover nicely. theoretically speaking lah