Ti easier to work.. No need to space coil..

BUT remember not to turn the coil hot red.. Ti should be hot blue-ish..

As bro Nothing Better To Do suggested, feeling like getting velocity rda.
Subox mini with velocity okay tak?
Mana I can get good price? 
Penang area...

In Penang? Good price? Keep on dreaming!! Penang vape shops just want to cut your throat. Your best bet might be Vape Empire Penang or buy online.

Lol... I also feel so... Sigh.

Have you got the coiling tool? What I do with my nickel cool is I wrap them tight, then I pull it from both ends and push it together again. The springy nature of the wire gives me perfectly spaced coils every time. Been running dual nickel coils on my Velocity without any problem.
I've heard Titanium is better and much easier to work with though, so I've ordered some from FT.

I did that, give them space between wrap still cant. I use goblin mini, i did at 1 side and it can read.then i did the other side and suddenly the mod didnt detect and ohm hence it said low atomizer . I dunno where my mistake.

I use pure ni200 nickel 24 awg with 7 wrap 3mm diameter

When you add a second coil the resistance is halved. Most TC mods range is 0.05 ohms at the lowest. When you add the second coil the resistance dropped below 0.05 ohms. You can either use it as a single coil or use 28awg wires if you want to do a dual coil.

You're absolutely right. I think most people don't realise how low the resistance of Nickel us compared to Kanthal. When I use 26awg Nickel, I do between 10-15 wraps for a dual coil setup.

As bro Nothing Better To Do suggested, feeling like getting velocity rda.
Subox mini with velocity okay tak?
Mana I can get good price? 
Penang area...

Haha.......I doubt you can fit 10-15 wraps in a tank's deck. I reckon in most tanks deck 8 or 9 wraps spaced coil is the largest that can fit. 28awg is about the lowest gauge to use if doing a dual coil.

Just get used to buying stuff online. Its pretty painless. Check out Fasttech.com if you want to buy from China.
If you want to just try out a dripper you can get the Hobo V3 from Altsmo. Cheap and good.

http://store.altsmo.com/Atomizers

Order now and you'll receive it by friday.

For subox mini or velocity?

How many wraps to get 0.3 ohm? I'm using kanthal 28awg.

You're absolutely right. I think most people don't realise how low the resistance of Nickel us compared to Kanthal. When I use 26awg Nickel, I do between 10-15 wraps for a dual coil setup.

Velocity rda.

ya, as previous supporter if bat in the past 15 years. they do lost a lot after i vape. 2 day 3 pack is normal 4 me.
even my ass hole friend that work at BAT ask me not to vape bcz will affect his bonus.Lmao

Went to Sunway Pyramid just now and saw a couple of morons blowing huge clouds inside Aeon. Please don't do this, people. It gives all of us a bad name.