i saw someone post this before..

Novatech P700M 1/10 Sensored Brushless System 7.5T Combo - 390

http://www.rcsmart.com.my/webshaper/store/...roductItem=5367

RM300 and below ><

just add a bit laaa~~ 

ya, i'm talking the original street jam, i am thinking to buy one shot because i think if i buy the clone one, and many other things i need to repair later on, and when the times comes i want to upgrade, i spend more...

---

Added on March 27, 2012, 7:29 pm

but for the electronics (excluding the remote), the price is almost the same right?? i am just thinking to get a good chasis to start and go into it seriously..

For beginners, like I said, is the Sanwa really necessary?

err.. i'm a beginner and use MT4.. good TX n RX is a big diff..

Hmm, still got loads to learn

Any ESC+Brushless combo to recommend? Below RM300. Me poorfag

Saw these 3 that interests me

Ezrun 9t Combo ESC35a
ZTW 5.5t Combo ESC60A
Ezrun Brushless Victory 5.5t Combo ESC60A

i saw someone post this before..

Novatech P700M 1/10 Sensored Brushless System 7.5T Combo - 390

http://www.rcsmart.com.my/webshaper/store/...roductItem=5367

that's the way to go.
upgrading will cost more.
get the best in your mind. even clone teh-r31 is fine, but make sure u upgrade to alloy parts as soon as you can.

motor around 10.5T or 9T is good for start.

---

Added on March 28, 2012, 12:42 am
see reply from kayFX below

i'm using 35a ezrun, 9t motor. good for beginner, but definitely wont be able to catch up with xerun 10.5T.
better top up a bit, get xerun sensored, with advance timing and turbo mode
man this hobby can cost a lot once you get serious with it.

man this hobby can cost a lot once you get serious with it.

Here's my break down (Some may not agree with it)

- RTR car (I chose the Vantex X-ray) - RM350 (If you want to play CS later, then opt for the TEH-R31, around RM340 RTR)
- ESC+Brushless - ± RM 300
- LiPo Battery - ± RM150
- FlySky GT3B - ± RM150
- Balance Charger - ± RM150

Total : ± RM1100

The price excludes aftermarket rims, tires,bodyshells and accessories, which all of us would change sooner or later

That should keep you playing for some time. As for parts, 416 and xray also a lot parts. Just worry about the electronics. Hence in my estimation, most are replaced, saved for the servo

hey guys,im startin to take interest in this sport
im from kuching,swak
so can u guys guide me on what type of rc car should i buy
and guide me through the car parts,details,difference in type
btw my budget is around rm1200

need to get a new body shell - 200mm type

any recommendation which brand is the most detailed? yokomo? tamiya?

WTS

RC HL518 upgraded bmw e90
Ad text: Rc car hl518 complete set for sale.
Original Tamiya BMW E90 casing.

Complete Lights. White front Lights, Signal, BAck
Lights, Brake Lights.

Upgraded Motor, Servox servo,2.4G controller
digital..
Upgraded Battery (see in Pic)
Ready to Drift.
Comes with extra wheelset for Touring.
Complete with Charger
Reason to sell: No time to R/C.
price RM 700 Nego

Contact Jon 012-2888087

definitely need a new shell and rims

bhind tabung banyak... enuf for yokomo shell 

Tomorrow Brushless motor+ESC+Lipo