Ah cool.. We got almost the same electronics setup.. 9T mean 9 turn motor.. The lower the turn the faster the car goes if im not mistaken.. For example with the 9T motor the pinion gear turn 9 times for the wheel to make a complete turn.. And for a 5.5T motor the pinion turn 5.5 times in order for the wheel to turn a complete rotation.. I think its some where along that line.. Correct me if im wrong.. BC6 is the same fast charger as mine.. Its alright i guess..

This post has been edited by crash_99: Dec 5 2011, 11:37 PM

ahh.. just now i try Balance charge and it got Volt error.. how to know my batt volt and how to know it empty?

basically what should i do for the first time? this batt i have straight out of the plastic and play.. never charge yet.. is it full when new?

to balance charge ur batt first u have to connect the white connector from ur batt to a balance adapter on the charger. then u should select the lipo balance program for the batt type on the charger and set it to 2S 7.4v. and the current should be set to max 1.0v. then u press the start button for 3 second and it should start charging. when it start charging u can press the right arrow button and it should tell u the voltage of each cell of the batt. the only way for u to check ur voltage is to use a voltage indicator or if im not mistaken u can check it thru ur remote.. dont fret if it say that ur voltage per cell is 4.2v(which total to 8.4V and not 7.4V), that is normal. 4.2v per cell is the max tho. hope that helps.. let me know if it works.

current 1.0v? how a bout the amp? its 4000mAh so it should be at 4.0A rite? i got all connector rite.. err how to check voltage thru remote? really noob here.. ahaha..

Yea.. Sorry 1.0A usually i use 1.0A max for balance charging. I'm not really sure regarding the remote as i haven't even unbox it yet .. its suppose to be my birthday present to myself and my bday is not till the end of the week.. haha.. lame.. try checking this video out http://www.youtube.com/watch?v=crY7y0iNkvY I think on the RPM interface u can check the voltage of the batt at the top left corner of the display.. i think.. I'm not really sure.. and also try reading the manual..

---

Added on December 6, 2011, 12:26 ambut that could be the batt in the remote itself.. i could be wrong..

This post has been edited by crash_99: Dec 6 2011, 12:26 AM

getting vantex OTA r31

woa.. birthday present to self.. so u got MT4 also.. got it.. the telemetry page got the batt voltage.. the TX batt shown on both page on top right.. i still got 6.5V for the RX (means the batt to power the car also rite?) anyway when should i charge it?

good for u.. how much?

cheap cheap rm 399 .. since my gf has teh electronics

Yup. i got the MT4 aswell.. hehe.. yeah.. im guessing the rx voltage is the same voltage in the lipo batt.. set the cut off point to 3.5v per cell on ur ESC using the program card.. try not to let the batt go lower then that.. some otai usually set it at 3v per cell.. once the batt goes down to 3.5v the esc automatically cut of the power and u need to charge it then.. def. dont let the batt goes down below 3v per cell.. it might get into deep discharge and might not be able to charge it back up.. that is what i was told anyway.. heheh

@bro calvin.

wah.. for ur gf is it.? how much u get it for.?

rtr rm 399

Not too bad for a rtr set.. Haha.. Nice purchase bro.. Would not mind some pics of the car tho..

I can get the same price here in kuching but with standard 540 motor and MHz remote la.hahaha

good info.. still got a lot to learn.. heheh.. where do u usually drift? just finish tuning my car by someone help at DRace.. not yet drift.. hahaha..

This came in the mail last week, not sure if i post it here..

Eagle racing TT01 GRT drift conversion kit
Eagle racing TT01 1.44 Countersteer kit

cant fight the urge to buy this, when i saw it for RM260 including shipping.. haha.. anyway this would be my last purchase for rc this year.. next will have to be the pro kit i have my eyes on for some time.. hehe..

p/s: driftnye tak pandai2 lagi.. aiyaksss..


Attached thumbnail(s)

Yeah.. that helps a lot.. thank you very much bro!
Need to reg at Malaysia RC and D1-10..
And i assume my budget (1k-1.5k) is more than enough based on long explaination by cool drifters here..
And im living at shah alam.. i know Hobby Performance Centre at Glenmarie Sec.U1.. is that shop good?

i usually drift at a parking lot at my apartment for now.. will be going to a proper track soon.. let me know when u wanna go to Drace again.. will be great if can join u.. maybe we should go visit bro jaylike aswell.. he drift at MOD.. i can give u my number if u want.. can easily contact if u want to go to track.. let me know anytime..

---

Added on December 6, 2011, 1:07 amno problem bro.. just sharing.. HPC at glenmarie should be a good shop.. alot of talented drifter are there.. or use to be there.. im not really sure.. never been there my self.. yeah.. 1k to 1.5k is enough to get a decent setup..

This post has been edited by crash_99: Dec 6 2011, 01:07 AM

eh, i live in shah alam too.. HPC is the track along jalan pg saujana kan? just bought mine first RC car.. damage RM 2162 be prepared for impulse buying.. ahaha..

Ooo.. anything can PM me.. if got bb lg senang.. hahah..

thats mean must bring money ngam2..
kompom racun dia kuat gila..

yup.. sgt kuat poison.. HPC kt mane?