Which mode are you using?

Evic VTC Mini 

Lol
I meant which mode as in Temp or wattage?

How do i delete my reply. To ashamed to look at it again.

I'm using wattage mode. Don't even know how to use temp mode, i thought need to change atomizer right?

Am I the only one who's wanting to try these juices?

kangertech occ can tahan for how long?? can reuse ah?

How do i delete my reply. To ashamed to look at it again.

I'm using wattage mode. Don't even know how to use temp mode, i thought need to change atomizer right?

You use wattage with kanthal wire
Use temp (nickel) with nickel etcetc

Dry hit might be caused by wicking
Don't wick too thick,in which case reduce the thickness of the wick
And try lower your wattage,increasing it little by little until you find the sweet spot

What is wicking? I didnt do any recoil yet, i just bought it. Do i need to change cotton etc?

using RBA/OCC?
RBA is the one you make your own coil
OCC is the one pakai buang one

Wicking is the cotton you sumbat into the coil on the RBA
if you are using the OCC, lower your wattage

try this

drain the tank completely. then pull out the rba. at the 510 pin (on the base, not on the mod), push it hard using any flat tool (screwdriver maybe), then put the base on your mod WITHOUT the rba.. once base is properly seated to the mod, put the rba. check now to see if it detect or not.

next time when refill no need to take off whole tank, just open the liquid chamber is enough. save you the hassle.

using RBA/OCC?
RBA is the one you make your own coil
OCC is the one pakai buang one

Wicking is the cotton you sumbat into the coil on the RBA
if you are using the OCC, lower your wattage

normally if out of box for Evic VTC mini is RAB or OCC, i dont know. I only know how to fire button and fill liquid Still learning.

just decrease the Wattage for now

normally if out of box for Evic VTC mini is RAB or OCC, i dont know. I only know how to fire button and fill liquid Still learning.

I'm guessing you didn't prime your coil and never did a primer puff

Meaning?

Thanks sifu, you the best for now.

First, before you start vaping, drop a good amout of juice into the coil only then you start filling your tank. Leave it for 5-10 mins only then you can start vaping it. That's priming your coil heads.

Primer pulls is when you're vaping and take a few puffs without pressing the power button. To force the juice into the coil. This way your coil is performing at its best status and relatively, longer lifespan

Shit me three. This guys had reddit singing praises while giving them a handjob for their juices.
Well you could rebuild them. Max around 2 week, barely.
That's the beautiful life of /k. Your shame will live on.
Btw what tank? OCC or rba?

I guess i didnt do that. Is is too late if i do it now?