Tried searching for a thread on Phantom 3 but could not find one so trying to start one then. Let me know if there is already an existing discussion - I may have overlooked. The aim of this discussion thread is to build a local community around this RC camera and share tips and tricks among users.

**NEWS UPDATE**
- Firmware update v1.6.0040 for Phantom 3 released with new features!


Introduction to Phantom 3:
Official website

Latest firmware (for P3 Professional):
Official firmware

Anyway, for those of you who are either new to DJI Phantom 3 "Aerial Camera" or contemplating to get one, the new DJI Phantom 3 has 3 lines - Standard, Standard 4K and Advanced/Professional. The Standard model lacks VPS (visual positioning when there's no GPS available), Lightbridge and access to GLONASS satellites. Both Advanced and Professional have all the above - the difference is that the Advanced can record 2.7K videos whereas the Professional can record in 4K.

For NEW USERS:
Before you jump into flying the Phantom, the first thing you should do is to UPDATE the aircraft, RC controller and smart battery firmware. Ensure both your RC controller and Phantom 3 are fully charged (do not charge both at once to prevent the charger from overheating -DJI's FAQ advice). Some good guide on how to update firmware below:
Firmware update guide

Note: Make sure the small foam piece behind the gimbal and camera cover are removed prior to updating.

Once you have updated the firmware, here is a basic list of what should be done to setup your new Phantom 3:

Note: if your smart device does not have cellular service it may be best to first setup your P3 in a location (back yard, etc.) where there is a wireless network - the DJI Pilot app requires you to login with DJI and also may require some software and firmware updates. After setup, you can then take the P3 to a larger field for your actual first flights.

1. Download and Install the DJI Go app on your phone or tablet.

2. Mount your smart device in the included holder on the RC controller and connect it to the controller using either the supplied USB cord (android) or your own lightning connector (iOS). Make sure the 3-position switch on the top left of the RC controller is in the rightmost position (P-GPS).

3. Remove gimbal lock and lens cap (if included) – check that the micro SD card is in your camera.

4. Turn on the RC controller (first) then the Phantom - both are turned on by pressing the respective power button once then holding the button until the device turns on. In short, TAP then HOLD button.

5. Open the DJI Go app - this should guide you through the steps required to register and update your Phantom 3. A guide for your viewing pleasure:
Linking DJI Pilot/Go App

6. Calibrate compass on the Phantom (the DJI Pilot app should guide you through this step).

7. Activate the “Camera” screen in the DJI Pilot app. A banner across the top center should inform you of the status of the aircraft - “Safe to Fly-GPS” means the aircraft is ready. Check the map on your smart device to assure that the home point is where you are currently located.

8. Spend some time flying in the simulator that comes with the DJI Pilot App (under Help). Familiarise yourself with the controls - both on the RC controller and your phone/tablet screen, before taking the Phantom out for a real spin. For beginners, always bring along a friend to be your spotter to help watch out for hazards or obstructions.

DISCLAIMER: I am not a professional or drone specialist. I am just an enthusiast seeking RC fun, responsibly and ethically. Whatever I share is not prescriptive - it is merely one of many ways to get you started. Please consume the information here at your own risk and discretion.

Phantom UAV Repair Services
Phantoms, like all airborne UAVs, are fragile machines and Malaysia being a relatively young market lacks after-sales service. If you crash or damage your Phantom 2 or 3, there is still hope! Good service and reasonably priced. Check link below for more info:
Phantom 2 & 3 Repair Services (MY)

Phantom owners:
(1) pljex - P3 Advanced
(2) kayFX - P3 Professional
(3) uraki - P3 Professional
(4) SupermotoXL - P V1.1.1
(5) ' or 1=1 -- - P3 Professional
(6) red.mosquitos - P3 Professional
(7) mezerwi - P3 Professional?
(8) edwinnwh - P3 Professional
(9) jangz.EZ - P3 Professional
(10) tubik - P3 Standard
(11) Raymond6 - P3 Pro
(12) Jeffrey1987 - P3 Standard

This post has been edited by pljex: Apr 3 2016, 09:21 PM

Reporting in.. Phantom 3 Professional.. Total flight time 27 minutes.. Total distance 1668m.. Last flight 26/6/2015.. Last location Damansara.. Total flights: 8

Great to see another owner! Perhaps we can organize weekend meet-ups when we have critical mass. Let's start by compiling a list of owners.

I have no prior experience on flying rc drone but i must say this phantom is easy to fly..

how is the 4k video in terms of quality ? Anyone done any post production ? Interested to know what workflow is.

Perhaps kayFX can answer this since he owns a Professional. There are samples you can find online but most have been downgraded to 1080p:

http://m.youtube.com/watch?v=z4kTNqSZECE

The lens are essentially the same (Adv vs Prof) and there is minimal distortion (less post-production hassle). A big upgrade from Phantom 2 Vision+. Note that 4K footage requires a reasonably powerful PC for post-editing due to the large amount of data to handle and render. I have tried post-production on 1080p footage.

In terms of workflow, after recording, you'll need to transfer the videos/photos saved in the memory card of the Phantom to your PC before doing any post-production. The controller does save a copy of the streamed footage but in low quality (some artifacts are present so only useful if you want to quickly share online, not for professional work).

Hi guys, P3 Pro user reporting in.
Went to Eco Majestic and did a test flight today and uploaded to youtube, did colour correction and adjusted colour curve in Sony Vegas Pro.

What do you guys think?



This post has been edited by uraki: Jul 26 2015, 11:22 PM

Nicely done, uraki! There's this miniature feel to the scale of things. Have you tried Course Lock under IOC (Intelligent Orientation Control)? Less worry on the flight path and more focus on the framing of your shot.

I'm also a Vegas user! hehe

Yet to try the IOC, still learning the controls as this is my first cam drone.
I'm still a newbie in video editing, do teach me some tips sifu

Just got this thing yesterday. Damn easy to fly. It practically flies itself

Very happy with the professional's video quality. can't wait to spend more time in the air with it.

Where is the best place to buy dji with good price and after sales service? What is the price? I preferred buying from the shop rather than individual

here are a few link:

Average Drone RC

March Equipment Store

Direct Imaging

Shashinki

all are local online shop..

You can also try YL Camera. They have physical stores in Pudu Plaza and Jaya 33. They also carry the higher-end Inspire 1 model.
http://www.ylcamera.com.my

27 minutes? What is your underload voltage per cell after land?
I usually fly until cells down to 3.6-3.8v. I believe average flight time around 15 minutes.

Here's my video to share

Its the pilot total flight time in the user center flight record.. Not a single run.. Up until now i have total of 1 hr 9 min.. My average single flight around 9 to 10 min..

Hi guys, hope you don't mind if i join in, but i have DJI PHANTOM V1.1.1. upgraded to FPV still active and healthy doing some aerial shots. Shots taken using GoPro HERO4. Can't afford for P3 yet but the V1 does the job well after full year of activity.

Here my blog about it and some galleys:
DJI Phantom:
http://www.supermotoxl.com/FPV/UAV-models-...enu-id-119.html


Videos:






Photos:



















This post has been edited by SupermotoXL: Jul 31 2015, 03:05 PM

SupermotoXL, i think you're likely the most experienced pilot around here. Very nice photos and videos! Professional-grade presentation. Do you do this as a hobby or as a profession?

Captain SupermotoXL even have custom made drone with a custom apps.. Teach me masta..

Thanks, i'm just doing as fun and hobby. I don't make money taking aerial photography. I just like to be in the sky and lepak around only hehehe.. Everytime i finish building stuff, flying and other things i always blog, share my resources to help other fellow hobbyist. Its r/c club thing. Sharing is caring. Sometimes help local do some aerial stuff, teach people how to fly and fun gatherings freely. Its things i do to make my self happy.
Cost wise this hobby i don't spent much, i go around find somebody's second hand junk, recycle it and make it work again. I bought my DJI Phantom and other flying stuff second hand after someone crash it lol.










I don't make custom apps but i just download it, use some open source apps and mix around some hardware to make it work. You can visit my website (http://www.supermotoxl.com) where you can find documentation how to build your own super cheap quadcopter that can intelligently "follow me" & "selfie" as you walk around and took great aerial photography which made out of throw away box foam and bamboo sticks costs under USD$100 of parts.







This post has been edited by SupermotoXL: Aug 1 2015, 11:05 AM

thanks for sharing