You can always refer here for application methods with pics

http://www.arcticsilver.com/arctic_silver_instructions.htm

oo got it

@Shawty

Thanks for all those Informations.
But how bout my GPU ...now im very concerned on my Graphic Card.
It reached 80c. I tried to lower down the core/memory frequency to 266mhz.
The temp is still the same!

Should i apply thermal paste? Air cooler or water cooler??




@Neoxz
Thanks...i went to the site ..
and there is a safety precaution:
A modern hi performance CPU can be permanently damaged in less than 10 seconds without proper cooling...!!

time to change to a better heatsink IMO.zalman VF 900 shud do the trick for ur GPU and some AS5

Guys, I need a bit help here. I also need a new CPU heatsink for my DS4 + LGA775. Price doesn't matter and I wan the heatsink to be

1) Full copper (yes, including the fin would be perfect)
2) Can do combo cooling like Gigabyte G-Power Pro/Lite can do. (this is important because if u know the design of DS4 it cools the mosfet and chipset down like 2~3 degree.)

google alot and so far i only see thermaltake typhoon series with the requirement i wan, but does not look very nice. donno bout the performance too. Hope to get something like G-Power Lite. And I believe the XP-90c does not cool the surrounding also, am i rite Mr. shawty?!

Err, what do you mean by that?

XP90C is just the same with XP120 [except the size] it'll blow the air direct to the motherboard, which means, it'll cool all the thing that is under the fins of the heatsink...

erm, asking for your opinion lor. since you know more bout thermalright. so it does cool the surrouding yer? so basically xp120 and xp90c is the same just tat one is copper and one is not la hor?! you know where to get xp90c?

Thermalright heatsinks that cools the surroundings are:

Thermalright SI120 - Full Aluminium
Thermalright XP90 - Full Aluminium, Copper Base
Thermalright XP90C - Full Copper
Thermalright XP120 - Full Aluminium, Copper Base

This heatsink's fins face towards the base of the motherboard, so it'll help to cool those parts that's near the heatsink width and length...

Where to get XP90C?
Try asking from RLHH...

If don't have, then you have to fork some more money to buy it at Overclocking Paradise...

@Uncle Shawty ah...

I already bought a two fan Vantec and plug into PCI Slot ..
Now my GPU = 55c ... ok huh ??


The picture shows my previous GPU temp..
But i still need to know which CPU temp should i focus?
CPU temp ? CPU core1 temp ? or ...CPU core 2 temp ?
Coz i tangan gatal wan OC my CPU ....

You're GPU at 55c?
Now that's better than 70degrees

About the cpu temps, u have to ask those that uses everest, i can't help you because i've never use Everest before...

Read HERE

How come this guy can reach 3.0Ghz++ with stoch HSF only ??
Can anyone explain ? Is it possible ??

Why not if the ambient temperature isn't as hot as in malaysia.....

somemore he is using performance ram rather value ram that most of us would use.... better OC ...

besides his temperature seems to be okay mah .... 40+ to 50 ...

mine E6600 only 32 idle and 42 load....

wah, ur temp just like using athlon. what cooler u use?

i am using C2D 6600 lah ..... cooler is Thermalright Si-120 but will change to HR-01 tonight after COD ...

i know la, u using c2d 6600 like in ur signature, that why i said JUST LIKE USING ATHLON, cause i have a pc using athlon got temp like ur's..

btw, u changing to HR-01, what about ur SI-120?

This post has been edited by E-J@1: Dec 1 2006, 04:52 PM

Eleh, nak beli SI-120 la tu...
Ultra 120 ko tu tak cukup lagi ke bang?

tanya je, tp klu dia nk jual, leh gak
FYI, ultra aku dh jual ke sanko, now using xp-90c

This post has been edited by E-J@1: Dec 1 2006, 11:33 PM

Hi ,

What is the best temp for e6300 . any1 plz.. & y the temp. show in SpeedFan & Coretemp is different??

This post has been edited by nbird88: Dec 2 2006, 10:02 PM

"what is e6300 oc'ed best temp"? u should state how many it OC.

but overall not above 65c (load) then should be ok d

try TAT (intel thermal analysis tool).

Depend on how much u OC and now much is ur vCore and vFSB..
if 2.8GHz then about 64-65*C, 3.01GHz or above then >66*C