not to forget what type of cooling u used

mine....@ 2.8GHZ 70c load in TAT

thts unussual..

should be ur thermal paste not really applied well. try to apply it again. My e6400 with stock cooler reached 68c with stock speed bcoz not applying well.

This post has been edited by basSist: Dec 2 2006, 11:34 PM

or u chance back to intel HSF to test and see how..

Ohh..
XP-90c?

That heatsink should be in the museum of heatsink together with my XP120 liao...

forgot 2 tell ,
im using stock cooler . now oc till 2.8 . gonna get probably HR-01 . after tat only clock beyond 2.8 . coz still newbie . so dun dare 2 oc 2 much. so i juz 1 2 noe with stock cooler & oc toll 3.01 whats the normal temp.?

yep to think an old heatsink like ours still standing till today

juz tried TAT ,

in 100% load my temp goes 2 71c for core 0 , 68 for core 1 . its like so damn high . using stock cooler.

You might wanna consider getting a Thermaltake Blue Orb to bring down those temperatures.

strange... did u test ur OC result...? like Fear test or benchies...? I can go for 2.8 at great stability and temp still 64(measured wif coretemp) on max load... but performance go down...

mine is stable no prob now,

when i use OCCT 2 test the temp wont so high. if i use the iTAT put 100% workload then the temp boost up. think of getteing HR-01.

Old heatsinks doesn't meant that they don't perform well, it's still good enough if compared to those intel stock heatsink that is loud, noisy, and doesn't perform well...

But one thing for sure, if u're in russia, no need to use 3rd party heatsink liao, just use intel stock heatsink is enough aedi...

As the temperature in russia is under freezing temps...

Correct me if i'm wrong guys, as that what's i've heard...

u got FEAR....? go test and show me us ur result la... or use 3Dmark05/06...

actually when someone says "my temperature is ## celsius, which one do they refer, cpu temperature or core temperature..

any budget way to clean thermal paste like alchohol?

waz the best hsf below RM200 for E6300+965P-DS3@Centurion 5

This post has been edited by deric88: Dec 6 2006, 03:21 PM

hmm, my e6300 at 100%(folding@home) core temperature around 65, if use TAT set workload 100%, shoot up to 70C, using stock thermal paste and hsf

btw my clock speed 350x7 stock vcore

This post has been edited by deric88: Dec 6 2006, 03:50 PM

if it is c2d then mostly we refer to core temp and not cpu temp. but for other they are refering to cpu temp as other than c2d most of the proc don have the die sensor within the core.
budget way? alcohol wont cost u too much. RM10-RM20 can buy one small bottle d.

best hsf below RM200.. TT btvx, Infinity, xp120 etc perhaps.

Want something cheap and reliable?
Get you'reself a Gigabyte G-Power Pro...

G-Power Pro.. noise level quite high right?

That's if u're putting the fan to run at maximum speed liao...
The fan can be adjustable lor...