OMG mine ada this bunyi doing right hand corners

Rear axle KO?

This post has been edited by Eugene91: Jul 22 2015, 11:12 PM

lol i mean when i first bought my car la


maybe? hahahaha but if you ada mod other stuff then i tak tau la cause my car fully stock not single UR bar install oso, so easy to find out what problem gua

like that I not sure liao, if under warranty just keep visit SC lo until they cannot tahan change whole car for you?

Anybody know any trusted "bengkel bawah pokok" near Bangi/Kajang/Putrajaya or even KL that can conduct CVT oil change ?

Since my car was already out of warranty, don't want to go to SC anymore, was charged around 900+- before this for cvt services.

This post has been edited by swasts: Jul 23 2015, 04:35 AM

Kent Goh's XD-Auto werks?

But that's in Kepong already

cvt oil + cvt filter charge only rm500+ iinm.
just go cvt oil change at SC, then else go bawah pokok.
cvt filter can change every 2 times change cvt oil if u poorfag.



or this

Zordaq Bangi
No. 2, Jalan Bangi Indah 2, Taman Bangi Indah
Kajang, Malaysia

https://www.facebook.com/zordaqbangi

but i rekomen this one

https://twitter.com/EurasiaMY

i checked zordaq page also around that price rm450 cvt oil + filter + labour.

This post has been edited by iskazulka: Jul 23 2015, 08:28 AM

Door switch mod.

I've noticed Daisy's door switches are terribly unreliable, really Proton should upgrade the part but possibly they already have, anyway I wanted to solder a copper pad onto the steel body but it didn't like solder so I suppose it's stainless steel, so I soldered a strip onto the moveable contact.
I did all four and they work, for now.

davidke20 zeone

Do you know the hose size that connect between engine head loop back to intake hose? Plan to fit a OCT on that, that day clean TB notice the intake hose is very oily, which i think contribute alot to my dirty TB. Thanks.

Hi Bro...

Suggest 2 options...
1.
a) Remove connecting hose.
b) Connect separate standalone mini PCV air filter to rocker cover tube/"inlet".

c) Block tube @air inlet/point b4 TB.
NB. This simple mod provides good 1-way airflow circulation for rocker cover space ie PCV ventilation sys.

2. Use a 12 mm fuel hose 2connect a simple fuel filter (as OCT) in-btwin rocker cover & TB point.

NB. This wld collect oil fumes "sucked" towards TB point if & when sudden strong vacuum caused by sudden large throttle openings. ..

Best wishes!

This post has been edited by zeone: Jul 23 2015, 12:54 PM

Guys, how to check whether absorber mounting is kong already?

Hi Bro...

Answer?
Knocking sounds...?

Usually advisable 2change mountings @same time when replace shocks...

go bump/uneven road got guluk guluk sound

Cannot physically check? Last time my sister went for brake pads replacement, the magician said that absorber mounting kong already. Is it possible to jack the car and check the abs mounting?

So sorry, Bro...no idea re that...

Me hv alwaz followed rule of replacing all related bushes @time of replacing shocks...
So nvr had probs with them during their serviceable life...

Option 1 is a good idea. Where to get that filter?

I believe 1 way filter will lower the intake temperature as well.

Anyway, do u know the ori hose diameter??

This post has been edited by coolkwc: Jul 23 2015, 01:26 PM

IINm is 12mm ID

Good tires to recommend for gaga owners...cheap and grippy.

Hi agin, Bro...

Ori hose diam shld b also same as suggested replacement fuel hose (can see in pic) ie 12 mm.
Me not hv vernier/ext calipers 2measure it...

the air filter can get from kedai bang, iinm is ard 15 bucks... but sum accessories shop also got sell the price range ard 10-25 bucks...

dont wan, i bridgestone fan....

Kedai bang? Ape tu?

opps typo error, Kedai Abang