You house has separate dry kitchen and wet kitchen ? If yes, one filter head in dry kitchen for drinking purposes and another one in wet kitchen for the repurpose retired drinking cartridge for washing and cooking.

Yes, cyst.
Please. Just explain the features and functionality of the filter without the sales tone to comply with the forum's rules.

Hi Bro, which 3M filter suitable for apartment to install at PBA room?

Thank you.

Yalar, if you minus the replacement cartridge cost from the price of the complete set, you will find out the price of the filter head alone is so cut throat  overpriced.

You bought already ? Give a write up on how one can save RM600-RM700 by following your method.

This is why I'm bringing standard housings from Taiwan. Clear profiteering from adapter head by these companies. This is the trick, make custom housings/heads and screw everyone. Most filters are simple sediment or carbon, yet cost a fortune.

Well, ok, RO for $200 is pushing it as well. I mean can be done, but low quality components. RO at 300 USD from high quality components is more realistic.
I find here we lack middle players. We have 3-5K systems and then have crappy systems that leak and don't filter anything for 300-500RM. But also mentality, always want brand. In USA almost no one will consider 3M if it costs 400USD and Pentek is 200USD (talking PoE now), this is why all these brands are priced ok there.

I will present my PoU ASAP. Have it already, but had no time to write it up.

Next step is PoE.

There is also an issue of liability, these heads are damn strong and actually if they explode they may make a lot of damage, you can go to court against Aquaphor and win.

Fair enough. The product description also intentionally spelled Cristall Eco Wasserfilter

Thank you. 🙂

Any indoor filter cost less than rm500? I’m thinking to buy this Coway Genie SF Water Filtration System P-07IU. Anyone using this?

Haha ! That's what I thought too Being waiting for the two of them to engage with hestati for a more intellectual debate but unfortunately they fizzled up in the thin air upon seeing hestati's posts.
C'mon Amway sellers, your RM4k espring really have no answer to hestati's RM1199 FD?
Yes sir. Can start off with 3M CTM-01 first or just buy the 3M AP2 or AP3 filter head from Taobao. Perhaps you want to share the link of the 3M AP2 filter head that you bought?

You mean for the 3M and Cuno etc replacements? They are NSF certified.

On Taobao, are these original 3M heads? Wondering how much is the price... 3M also sets crazy mark up for Malaysia, time to parallel import it

Nevermind, found them. Hmmm, I have a plan . I wish I could find same for Aquaphor and not from Russia. I want to bring Aquaphor to 800-900 mark.

P.S. sorry for creating 3 posts and not replying in one, but as soon as I reply to 1, saw another one appearing just before.

Ok, will try to search for Aquaphor head as well, hope can get it without touching Russia, where logistics is a freaking nightmare. If can get price of Aquaphor down to 800-900 I think it will be good for everyone. I saw the head before, but it was for Crystal H, 4  cartridges, not 3.

3M, I want to find AP9xx series head, then can really bring the price down.

Yes, ap900 series is blue outside. Gotta find it.

Single Aquaphor you mean Solo? I don't see point in Solo, not too popular anyway, they are considering discontinuing it.

AP9xx series I search whole China sites liao. Bo, Yilek.

The most common 3M series for PoU are AP2 and AP3, I have AP3 head (Easy Complete), ar188 has AP2 head (all bought

Around RM1400+.
You are right. My bad, I terbalik. Mine is AP2 instead.
By C-Cyst cartridge for your AP3 + pre filter, cheapest set up.

One more questions:

Though FD components are NSF, I cannot get NSF certification with FD name on it, at this point it's impossible. BUT! Is there any kind of laboratory/tests/certification that would be value added? I'm talking either local or Singapore. For example, there is SGS in Malaysia, they are reputable international company and can do the test, but how much Malaysians know about it and how much reputation does it have here?

I know there are small independent labs, I'm sure they do analysis just fine, however, I find this analysis useless, because take lead for example, test result may show that there is 0 lead, but what if there's 0 lead in water coming to filter?

Any contaminants that you would be especially interested in? Take lead once again, we can make sure source water has lots of lead, pass it through the filter and show the result (same for chlorine etc).

Any of this is added value, or no? I could probably cooperate with the lab and even film the whole process of testing.