Hi everyone. I've just got my mi box s. Did the setup and connected to my wifi. Then, suddenly my wifi is not in range. The box can detect my neighbour's wifi but not mine. And my other devices can connect to my wifi.

So, I tried doing factory reset. And now I'm stuck at the setup as the box still can't detect my wifi. I'm using TP Link  TD-W8961N router if that's relevant.

Did anyone had this problem before?

Try changing to channel 6 and use only 20mhz. Some older routers tend to need that change.

Thanks but I'm not quite tech savvy. How can I do that? Using the router setup page?

up to you, check for warranty, local mostly is 1 year with MCMC sticker, others 3 months or 6 months, or none at all.

some selling lower price, but local mostly with MCMC sticker around RM299 +-

got any place to get those with mcmc sticker?
meaning these are warranty by mi malaysia?

warranty not by mi malaysia but local dealer.

you can try lazada, those selling from range of RM290-RM299, anything below that, no MCMC sticker and already been rooted box.

Yes, you have to log into your router setup page and go to wireless settings. These 2 settings will be there and try to change and see if it helps.

Thanks bro. You solved my problem!

Hi everyone. I've just got my mi box s. Did the setup and connected to my wifi. Then, suddenly my wifi is not in range. The box can detect my neighbour's wifi but not mine. And my other devices can connect to my wifi.

So, I tried doing factory reset. And now I'm stuck at the setup as the box still can't detect my wifi. I'm using TP Link  TD-W8961N router if that's relevant.

Did anyone had this problem before?

Hi everyone. I've just got my mi box s. Did the setup and connected to my wifi. Then, suddenly my wifi is not in range. The box can detect my neighbour's wifi but not mine. And my other devices can connect to my wifi.

So, I tried doing factory reset. And now I'm stuck at the setup as the box still can't detect my wifi. I'm using TP Link  TD-W8961N router if that's relevant.

Did anyone had this problem before?

you are using 5Ghz wifi? please use channel 48 and below, anything above channel 48, you cannot detect the wifi. and please bandwidth 20/40 instead of 80.

Thanks bro. You solved my problem!

r u using wifi repeater? i face this issue with wifi repeater.

plz use channel 1,6,11.

you are using 5Ghz wifi? please use channel 48 and below, anything above channel 48, you cannot detect the wifi. and please bandwidth 20/40 instead of 80.

His problem already solved la..

haha.

nvm. now help me solve my issue.

i face this wifi repeater (time-out) issue frequently. where the repeater got no internet, but if connect direct to modem got internet. it happen almost once every 24-36 hour where I have to restart repeater or restart both modem&repeater only can solve this issue.

or i have to upgrade to mesh wifi?

im using TP-Link Wi-Fi Range Extender (300Mbps ) TL-WA855RE

note: modem wifi been fixed to channel 1/6/11 & 20mhz.

I’m using the exact same model of wifi extender. I hve no such issues and its stable as a rock for me. Have you tried updating the latest firmware for the extender? Go to https://www.tp-link.com/my/support/download...re/v3/#Firmware to update the firmware and see if it helps solve the problem.

Do you noticed that even after they fixed the sleep bug, the mibox still very sluggish after waking up. I only used them for Youtube and Twitch, but both are lagging badly after waking up. Seem like it is just better to turn off completely and power up only when you needed.

Try turn on cec switch in HDMI CEC setting. For some reason, my mibox lags after sometimes if cec switch is off.

Well, I have no problem at all after restart. I can let it sleep fine if just for few hours. I only let my kids watch them on weekends. Hence after being idle for 5 days, it starts to lag no matter what I do.