Currently maxis only provide private ip for all subscriber by default hence making portforwarding not possible or accessing ur CCTV system from outside not possible.

To obtain a public ip access do the following:-
1) have your account no ready.
2) contacts the service center
3) tell them you need public ip.
4) the Service assistant will submit your request for approval this may take 2 to 5 days
5) once approved their internal team will need to make some modification to ur account.
6) they will contact you when approved & modification is done.
7) they will talk you thru the steps on how to make changes to the router.
8) reboot the device.

Once done you have a Public IP but in order to keep track of it. You need to subscribe to DDNS services like no-ip.org etc as ur ip changes once a while.

1. speed test
2. ping test
3. direct download
4. p2p download
5. ftp transfer
6. Test the dect phone + voice call to mobile and fixed line.
7. Test the home plugs (if you have one)
8. The line attenuation reading should be below 20dBM, anything above 25dBM is bad and shouldn't get installed in the first place.

The username and password is case sensitive try again with <Access key behind the router> as password should work with no problem

I followed the exact capitals as it is

Username: Administrator
Access key: XX0X00X <something like this (mixture of letters & numbers)
Note: Be warned that it is case sensitive

Link @ http://npr.me.uk/telnet.html
user : Administrator
password : its underneath your router. there's a key there

This is for those who are using THOMSON TG784n router and JDownloader for its auto reconnection for new IP's. Not sure if this happens to everyone, but I found out after testing and some googling in which this router will not work properly with Jdownloader's LiveHeader reconnection script (including Raw Mode). Initially I tried to use batch file to run telnet command, and realized that the batch will not work once you get into telnet mode (as it requires keyboard input) and thus; I've resorted to another method.

You'll need several tools / applications for this to work, be noted that it is best to be used only when you are idle from the computer, since this is just a very basic script.

GUIDE FOR AUTO RECONNECTION SCRIPT WITH ThomsonTG784N

• This is tested for THOMSON TG784n router only.
  
• JDownloader
  
• AutoHotKey
  
• Any basic text editor program (Notepad, Notepad++, anything.)
  
• Enabling TELNET CLIENT for Windows 7
  
• Locate the telnet.exe in your system.
  By default it is located at C:\Windows\winsxs\amd64_microsoft-windows-telnet-client_31bf3856ad364e35_6.1.7600.16385_none_1426830c3ebb712d\telnet.exe for Windows 7 64bit
  

STEP 1a: Prepare the script below and save it as reconnection.ahk
STEP 1b: Modify the script if necessary
You will only have to modify the green highlighted parts. If the location of telnet.exe is same as I posted above, you need not to make any modifications to it. By default, the script connects to the default router IP (192.168.1.254) with the ID of 'Administrator' and PW of 'yourpasswordhere'. Modify accordingly.

If you need to make modifications but unsure of how, you can either use AutoScriptWriter (recorder) that came with AutoHotkey or PM/reply here.
STEP 2: Attach the script to JDownloader Reconnection Script.

1. Go to 'Settings'
   
2. Click 'Reconnections' and select 'External' tab
   
3. Select the saved .ahk file. Alternatively, you can compile the .ahk file (right click --> Compile Script) and use the compiled .exe file instead
   
4. Check 'Use special executer for Windows'
   
5. Under 'Showcase' below, click 'Change IP' to test if the script works or not.
   
   
   • If it doesn't; first try to run the script OUTSIDE of the Jdownloader and ensure that the script works, if it does not, somewhere is wrong with the script.
     
   • If it works outside of Jdownloader but not when attached to Jdownloader, ensure that the script runs exactly as it is when it is executed outside of JDownloader; if not, check everything again.
     
   
   

SUMMARY:
Basically, you can create the script in any other preferred language of yours. The main concept behind this is to:

1. Launch Command Prompt (Telnet must be enabled as a Windows Feature) and type the following
   
2. telnet 192.168.1.254
   
3. enter your Username (e.g. Administrator)
   
4. enter your Password (e.g. 12345)
   
5. ppp ifdetach
   
6. enter the interface name (default is eInternet)
   
7. ppp ifattach
   
8. enter the interface name (default is eInternet)
   
9. type exit to quit telnet session
   
10. press any key to back to command prompt
    
11. type exit to quit command prompt window (IMPORTANT! I have tried to leave it as it is but the script will not work properly on 2nd iteration)
    

Hopefully this guide *CAN* help someone out there and if there's anything that I have missed out, mistakes or errors; feel free to inform me!

Thanks!

10Mbps @ RM138 Package


10Mbps @ RM118 Package Brochure
[attachmentid=3404035]