I guess nobody is into this?

How is the look after completed ?

Here is the picture with all my components in, without the left and right cover though, I put it in my TV console thus using vertical alignment with case feet bought from sfftime though.
I still have some other configurations to add in, like dust filter bought from taobao, which need to cut myself.

Without the dust filter, the temps are alright for now. I'm also worried about the temps if I add the dust filter, haven't had time to properly do it for now.

You can headover to smallformfactors.net in sfftime forums for my report anyway.

This post has been edited by Json188: Jul 24 2022, 02:34 AM

Is there enough room in the A4 H20 to fit Phanteks T30 fans on a deshrouded Zotac 3080 Holo?

Standard 2.5 slots size only.
Can’t fit any fan on side panel, there is no extra room

I done extra fans for Lian li a4-h20


This post has been edited by Benefon: Aug 4 2022, 08:00 PM

I was kinda thinking of deshrouding the card completely and strap the T30 fans to the GPU heatsink using zip ties. So the fans will be on the inside of the side panel.

Reckon there's space for that? The Ncase M1 I have is a perfect fit for the card right now. Wonder if there's more room.

A4-H20 max 3 slots GPU size.
58mm enough for 2 slot gpu size and top up 15mm slim fan.



My Zotac rtx 2080 Ti was 2.5 slots size. Can’t put any fan on internal side.



Benefit like gpu temp drop few degree and GPU fans won’t work harder than before and GPU fan noise reduce few DB level

Before


After


This post has been edited by Benefon: Aug 5 2022, 08:04 AM

The plan is to actually remove the Zotac fans and fan shroud completely, then strap 2 T30 fans onto it. The idea is that I can either do a quieter GPU at the same temps, or better cooling. Zotac 3080 Trinity and Holo has rather high noise past 70% fan speed, whereas the T30 is quite decent at 2000rpm.

I done for my Zotac rtx 2080 Ti, put 2 noctua A12x25, the temperature not as good as original.
You can try but not guaranty work for you.
For Asus Tuf n strix maybe can , due to wider heatsink

I just got myself a Lian-Li casing but I have not started on my build yet.

Hi guys, sharing my new build, almost all black theme

Specs:
Intel i5 12400F
Asrock B660M-ITX/AC
Noctua NH-U12s Chromax
Corsair Vengence LPX CMK 16GB (2x8GB)
Asus RTX 3060 TI 8 GB Mivi V2
Adata XPG SX8200 Pro 1TB
Seagate 4TB HDD
Corsair SF750
CM NR200
Artic 12CM PWM 1P fan x3 (2 bottom intake, 1 top exhaust)



I got Noctua LH-9I-17XX Chromax unused, initially I use ML-08 case, but the temp it quite high on heavy load.



I am selling this one, PM if interested.

Sometimes I wished I've bought the NR200 instead of NR200P so I can mount a rear exhaust fan But yeah, I originally wanted to stick to CM fans, and got 2 Sickleflows for top exhausts, and 2 reverse Sickleflows for bottom intake. They're quite.. noisy at speed and not that very good as exhaust past that top grille, so I just got 2 Arctic P12 ARGBs. Kinda regretted my earlier decision, lol.

Wish they have slim ARGB fans, since after upgrading to a Pulse 6750XT, 25mm fans can no longer fit as bottom intakes, anymore..

Yes I could just get P12 slims, but come onnn. I need some subtle lighting

U can get ID Cooling 12015 ARGB or scythe kaze slim rgb.

1 quick question for you guys. Do you build your SFF unit your self? I am looking to get a SFF build as ATX just too bulky and waste space. Looking to build with the nr200p max. Specs should be around below.

Intel i5 13600k
3080ti
1-2tb ssd
32GB DDR5 Ram.

I saw the case can get around 1300 in Lazada which comes with PSU and cooler. Do I just need to buy mobo, proc, Ram, ssd and GC will do. I think that setup would cost me around 9-10k?

Mobo 1500?
Case combo 1300
Proc = 1500?
GC = 4000
Ram = 900
SSD = 500

i think theres no Z790i in the market, yet.

Dont get ATX mobo if u plan to use itx case.

This post has been edited by firdausbhari: Oct 23 2022, 08:16 PM

Hey guys, been looking for z170 itx mobo for sometime now. Let me know if anyone selling it.
Z170i or b150i

Will Cooler Master bring in NCORE 100 Max into Malaysia?

Really cool to see tall tower design that can fit beefy GPU nowadays.

This post has been edited by MrSpeedy: Jan 29 2024, 01:34 PM

Anyone have experience with PowerTrain P60 case?

https://s.lazada.com.my/s.iLChZ

Picked up this (not so) SFF case. Antec Fusion from around 2007/2008



This post has been edited by bismaximus: Aug 20 2024, 03:43 PM

Hi guys, for a4-h2o casing, anyone with issue for the new power connector? Worry not enuf clearance since the card is inverted