Hi all Itx sifu, currently using nr200p with side tempered glass and aio radiator at the bottom, now I bought a 3070 gpu, last night did some testing found the card temperature up to 78c with the vertical riser, so now I’m thinking to change air cooler and don’t want to use the gpu riser, what is the best air cooler for nr200?
Edited:
Ok found it, fuma 2!

thanks for the link, going to watch it later

yesterday spent 4 hours to upgrade PSU, change the AIO radiator to side, GPU to bottom, ordered 2pcs of noctua 12x15 fans... and swap out the tempered glass with vented panel...
now my gpu max 70c 

im using auros x570i mobo, my gpu 2.5 slots, yesterday i tested put the Noctua S12A fan in the bottom but it hitting the GPU, then so happened i found there's sales in lazada for Noctua 12x15 fan, RM188.5 for 2pcs after discounted, so quickly placed order.
another reason why i prefer TG because i bought a 5 inch screen, was thinking to put the little screen to show some temperature, something like this

Can't wait for Sliger S620. I want to put my bad boy NH-D15 in there

This is really a good case, small and solid. just some thing need to look at la is if u install sata drive, that place will be kinda cramped because it is situated below the PSU, and like the cable pressing on it when u close the casing lol but sata drive is ssd type so no issue la no moving parts, and the ssd casing very solid also. 320mm card no issue slotting in. I think next i might want to do is to get customized cable with shorter length and the PCIE cable, dunno why they dont supply single 6+2pin, they give 2 head and really kacau la. SATA cable also 1 enuf, they put 3 or 4 in 1...

Another is i felt like the water hose for EKWB seems like maybe need better position the cpu block.. dont know if the angle will broke the hose or not.. but i see ppl install also like tat so far my 12400F under benchmark never hit 60c, my gigabyte 3070ti if stock no undervolt, temp around 78c when run unigine heaven, ambient temp is like 31c-32c tho. if undervolt 950mA, 1965mhz, temp went down to 70c. I see temp wise almost same like those youtube one la. Now thinking to switch to silent bios and see if the temp ok or not.

u mean t30 fans for radiator? this casing cannot fit any casing fan, if got maybe mini type can mount on the mesh lol. or very low profile one.

Standard 2.5 slots size only.
Can’t fit any fan on side panel, there is no extra room

I done extra fans for Lian li a4-h20

A4-H20 max 3 slots GPU size.
58mm enough for 2 slot gpu size and top up 15mm slim fan.

My Zotac rtx 2080 Ti was 2.5 slots size. Can’t put any fan on internal side.

Benefit like gpu temp drop few degree and GPU fans won’t work harder than before and GPU fan noise reduce few DB level