Normal pricing:

Balancing: RM5 to 10 per tire
High-speed balancing (on-wheel): RM10 to 15 per tire
Alignment: RM20 to 25 per section (front or rear)
Camber adjustment: RM25 to 30 per tire
Camber screw: RM30 to 35 per piece
Tampal tayar: RM5 to 7 per hole

any higher than above can be considered overcharging.

tire rotation shouldn't cost any to be honest.

Did alignment with chamber adjustment for RM55 at Lim Tayar Gombak.

BTW it is Camber,not Chamber

ok, im newbie car user.

only know balancing and alignment.

but when to get a camber adjustment and camber screw? i takut kena scam liao they ask me to change camber screw 

I think we need to compile the list of shops that provide cheapest service for balancing/alignment.

Long time ago I thought RM 50 for balancing/alignment is cheap.
Now I found another shop that charges only RM 25 for balancing/alignment.
I have been using them since then.

if you are using standard absorbers with no suspension mods, you do not need to worry about camber at all.

Where the workshop? Ytd i was quoate rm36 for alignment and rm36 for balancing. Rm25 for each right?
Should be standard absorbers. No modification was done. Suprima btw

rm 25 for both.

I think we need to compile the list of shops that provide cheapest service for balancing/alignment.

Long time ago I thought RM 50 for balancing/alignment is cheap.
Now I found another shop that charges only RM 25 for balancing/alignment.
I have been using them since then.

Ok. Thats cheap. Dont want share?

please share!
sometimes, we just want to go for alignment and balancing but halfway during the work, the shop might want to add like camber settings are out, and when they found out you have already got the 'adjustable camber screw', they will told you the screw may need replacement because already being 'abused' etc

Adjust camber normally RM20 per tire
Alignment around RM20-RM25
Tire balancing is RM5 per tire

But of course this is a general pricing

Different vehicle types will get different pricing

ok, im newbie car user.

only know balancing and alignment.

but when to get a camber adjustment and camber screw? i takut kena scam liao they ask me to change camber screw 

Those shops are bullshit. Everytime i go to make alignment/balancing they will show numbers on the machine which i dont understand shit.

Just think about it. Have u ever go to alignment shop and they say your alignment is STILL alright and no need to adjust anything?

Ive been driving for at least 5 years. U think i dont know how to avoid potholes? My friends all know how careful i drive, they always ask me "why i drive like unker?"

U think the car industry so stupid to make lauyah shock absorbing system?
If all car alignment is this fragile then better dont make car lahh. 

Camber alignment is not that hard to adjust, what else the nuts. If so expensive then it is supposed to hold and not being move every time u hit a pothole! Its what camber nuts are designed to do.

Their machine also donno how long never calibrate. Bought cheap from china with no maintenance.

I think camber and alignment service is scam. Shop can sell cheap tire but their margin proit actually come from "camber adjust and nuts"

But of course, this is just my opinion.