350 drivers are awesome on sli. About 4% improvement in benchmarks

Full 99 utilization in all games so far, both cards hitting powerlimits higher equally.

bro wish u can see what call of duty advance war far all cranked up filmix smaa 1x ( they said dont use 2x because of sli)
4x supersampling.. 10.5gb fps gaming 70-80. cutscenes 45-55.

gonna try 8x/16x. its beautiful.

What setting??

Upped to filmic smaa 2tx (gecsaid to use 2tx..so..with supersampling 2x)
Getting 70fps at 1440p. This is 5k right.

This time gonna complete this game on campaign. Its beautiful.

Dude its gonna be 3K with palit etc n 3.5k for asus.
Samething with 390x

Resellers are still basing on 3.8 usd rate.

This post has been edited by cstkl1: Apr 13 2015, 12:56 PM

16gb ram koyak.

Last friday rate was 3.62-3.63 buying tt.

Use a tape over it. And remove it slowly.

In best circumstances yes. Policies change. Person in charge change.

So.. No harm in keeping it properly.

Unless u have damage ut already.

Intial testing in ocn looks good. Since the game was designed for pc first.


initial 350.05 had a voltage/tdp issue but had 4-5 percent gain.
so 350.12 fixed that with gta V profile

also now Gsync can run in windows mode, 1:1 ratio screen scaling ( doesnt require full screen 1440p anymore)
Higher utilization rate of both cards even 3 way sli.

but still not happy codaw sli is still force rendering rate 1. Get better frame rates with one card.
This sli rendering always causes issue with gsync when overclocked.

This post has been edited by cstkl1: Apr 14 2015, 12:43 PM

Ati i heard .. If u disable the soft shadow thingy.. It flies.
Reports from herr n ocn

Kena that on my tb. They do 1228@1.075/1.0875v
1280@1.125v,1.1375. But whatever i do cannot stablize 1306.

They were great on air though. Water i could have done with lower asic. These two were 79, 81.

Samething now my low asic 60 titan x can take 1.274/1.31v n do 1546/1574, but high asic 73 only 1520@ 1.19, it wont clock any further n doesnt like going above 1.23.

This post has been edited by cstkl1: Apr 14 2015, 06:27 PM

First is indoors vault etc
Second is grave scene
Third is theraphy session

Racing etc with car was about 100fps.

So.. Sli is fine.

Btw if u dont know already. After u install the game. Always go to ge n press update for new drivers. It will install the profile.

Had to stop at this point as theres a thunderstorm.

Sli is working. So dunno what ocn is about.

doubt it. Sli is fine.

pretty sure a lot of ppl dont know how to use GE.
Even when you installed new drivers for that game. U need to scan it in GE, Press Update. Then the profile will be updated.

Also AA settings

Disable FXAA
Choose TXAA
and Choose MXAA 4x to get 4x TXAA.
Reflection AA should be the same as MSAA 4x.

( I wonder did they use the same engine as watch dog.. so similar)

This post has been edited by cstkl1: Apr 14 2015, 10:16 PM

Thats FXAA.

No choice bro. Not sure really about this game but in ubi games that uses gameworks. TXAA is best.

no issue using msaa 4x but really do not want like the sun issue etc in fc4, puddle issue in acu etc.

looking sli bits its using AC bits.

Ure comparing 2x txaa.. Try 4x TXAA.

Its cleaner

Msaa still has jaggiss even at 4x.

This post has been edited by cstkl1: Apr 14 2015, 11:29 PM

Yup. Generally samsung has better timings clock to clock with hynix its faster.

Hence afaik all classy using samsung

First 15mins initial gametime. Shadowplay tanks the fps by 20 etc.

This post has been edited by cstkl1: Apr 15 2015, 12:25 AM

Smaa uses temporal aa. It doesnt work on multi gpu unless its alternate frame rendering n thats like using a single card.
So no point talking about it

For now txaa is better than msaa n fxaa.

Spot in the video above where you can find jaggies. Try at 1080@60fps setting on youtube. None afaik.

This post has been edited by cstkl1: Apr 15 2015, 01:00 AM

SSAA of course lar.. Thats supersampling.

just for u lol.

titan x dsr to 4k. single card ( two card i cannot use it and it wont allow me to downsample on swfit)

everything max except no aa and post processing normal..

min 55-60fps. avg around 70.

but boy it looks good.
better than the 1440p .