For speed or semi?

94696 is extremely hard to obtain because it's a limited edition and long discontinued product, and if you manage to find one, it will be at a premium and overpriced value.

alternatively you can use any rear multi roller setting stay (FRP or HG Carbon, albeit the former is slightly weaker in construction).

most popular choices are:
1. HG Carbon Wide Rear Plate for AR Chassis (black, red, blue, gold)
These come in limited edition and most colors are discontinued except for the recently released gold lame version.

2. The ever popular t2 from Super XX Evo.1 kit
You can find this from the kit itself, or sold by sellers as loose parts. Not available as separate upgrade parts.

3. Rear FRP plate options depending on your creativity
- 15430
- 15243
- 15451

Any one use MS chassis brake system? how it perform?

as I see most of the event rules stated that battery voltage minimum 1.45 maxium 1.55, so wanna ask usually what kind of charger u guys use to maintain such specific value? Im looking for a cheap and easily available charger now, no budget for powerex or skyRC =(

use battery checker to check the voltage and keep on charging until the battery reaches desired voltage reading

my current panasonic charger can only reach 1.44-1.45 maximum, cant charge over this value ==''

what kind of battery do you use?

eneloop lite and normal eneloop, charger is panasonic BQ-391

aku baru nak cakap.
Avante Yellow SP and Panda open for sales de
Hahahah

oh btw,
heard that this month onwards,
we're back to semi-speed sebenar with LC!
semua cukup syarat @ 5-6 stret sahaja. LOL.

so go prep your car for LC yo.

both. got different parts to use for semi or speed? but i think semi more.

Yeah. How many units did you get for yourself?

My LC car full ORI Tamiya hahaha zaman Tamiya Underground.

My LC car full ORI Tamiya hahaha zaman Tamiya Underground.

rahsia! hahaha

LC full ori tak tentu ble berjaya. wakakak.

dah siap siap booking dah hari sabtu lepas

Experienced my first bent screw today (front roller). Is it possible to replace the screw with something else? I've seen people cutting shafts in half and using that and some stranger I met in a shop today suggested using motor shafts to replace screws. (I seriously doubt this would be legal in a Tamiya race)

Any advise from the sifus? Thanks in advance.

buy 3rd party allen key screws
harder better.
unless if u wana use full ori. then u can try using the motor shaft.

Yes the motor shaft can be used to replace screw, Im now using it (cant stand changing bent screw everytime). Require some cutting or drilling works tho


Attached thumbnail(s)

make sure you use motor shaft from the stock motor
because some motor shafts like power dash is slightly (marginally) thicker in diameter so it might give problem with your roller bearings afterward. i still have some rollers stucked with the motor shaft and unable to take em off because too freaking tight. it could ruin the bearing.