same problem here.
Went to Nilai SC, they adjust the door stracker.
i cannot say the problem 100% solve but better than before.
need to get used to it.

My advise, do not send car to Seremban SC for complain except normal service(Syntium 800 and Syntium 1000)
steering got noise (replaced steering rack but the problem is still there)
drive around 10mins (straight road), ESC will illuminated and steering vibration at speed ~120km/h.
call the SC, they said already done(alignment, balancing and reset ESC)

Next day, i went to Nilai SC, complain the ESC issue..
they check and around 30mins, they call me to get in the car(drive around Nilai Lama) to investigate the problem.

BAM..

1. they take the scan tool
2. check the steering angle sensor..... WHAT??? -28deg
3. reset and set it to 0
4. re-alignment... problem solved.

problem that i am facing now:
1. steering noise during turning (slow speed)
2. steering vibrate at 120km/h

My advise, do not send car to Seremban SC for complain except normal service(Syntium 800 and Syntium 1000)

Thank you.

This post has been edited by xphr3ak: Jun 29 2015, 10:00 PM

i have experienced this problem before.
Need to try 2-4 times to fully close.
Take your car to SC and ask them to reset the main power window settings.

Thank you.

i just wandering why many SCs do not use 10w-30 as this gred is recommended by Proton(refer manual book). I have asked Seremban SC, Bertam SC, Sungai Petani SC al of them do not have this. only xW-40.
Thanks.

This post has been edited by xphr3ak: Jul 6 2015, 08:42 AM

Same here.
I asked SC they said it is normal for Preve Premium.
Thanks.

Can you cranking the engine?
If yes, check fuse.
What is your mileage?
Thanks.

Yesterday i read on Prevoc's FB, it is timing belt tensioner problem. Not correctly aligned.
Not sure. Send to SC for inspection.
Thanks.

if "chak" sound, from my experience it is battery problem.
thanks.