Cos I need more bass.

Same, only thing is screw is on the back instead of front.

as mentioned earlier immobilizer easy to drop out, i guess the casing not properly fit.

try refit the alarm module inside the casing first. if fitted nicely, the casing should be closed nicely. but then u already glue it, so case closed.even my cap ayam casing also can be fitted nicely.

inb4 been there before. funker punya old key alarm jahanam masuk washing machine.

by the way, thank you for mentioned about the casing. just realised mine the key chain handle one side already patah.

This post has been edited by iskazulka: Nov 19 2014, 03:51 PM

Haiya bro,need to do fender rolling la...cheapest solution

RON97 is now RM2.55/L betul ka?

Thanks iskazulka and mahihi,

Fender rolling, I just need to go to any kedai tayar and ask them to do it right?

Why u changed to 55? last time the shop forced me to get 55 but i kept said don't want. They also said that 55 wont kena fender.

That shop have no stock on 50..and I'm in hurry that time

and that time do you know 55 will sagat?

IMO, better put spring buffer. later if use 50, u can cabut the spring buffer. IINM, if fender rolling, once buat cannot undone.

u better PM nestum get his opinion, because he is a tyre shop owner cum mechanic. FB KeanLeeHin

or PM kenjilew he works at a tyre shop in Puchong.

This post has been edited by iskazulka: Nov 19 2014, 04:28 PM

not every shop got provide fender rolling. u need to look for it..

Sama as me. But I told the shop I want 50 also. No stock then x mau tukar. Haha. Then the shop ask from his friend shop to get the 50.

Orait i got it, Thank you Guys!

i thought u wan 60

60 for my mum's iswara boleh la. 13 inch with 60. haha.

Lucky that day I din't took 55 else now gg already.

This post has been edited by wkwong91: Nov 19 2014, 04:36 PM

13" use 70 la.

Door hinge it is. Go buy spray grease and spray the hinges will do.

But mine using 60/65 only wor.

If you're talking about enhancing clarity of stock Clarion, r3apers is not wrong. Original speaker is low output speaker with paper doom, hence the bass is consider quite cruncy liao. It will not punch until you can feel it by your butt, but it's very sufficient for normal use. That however, if you put after market high watt speakers, then you'll have no choice but need a higher power output amp to power them up.

By adding 2 sets of tweeter can actually make the front end very clean. You'll need 1 set of ultra low grade(RM5 from Kedai Abang) pariah tweeter(so that piece of crap can bring out all the cymbal sound), whereas another set of proper tweeter that bring out the usual high pitch sound. For example human voice, breathing noise, guitar thread and sweeping sound. If you're panai enough, use capacitor to filter out certain range of frequency between the pariah/proper tweets, you'll get to hear Celine Dion jump in from your front windshield. Meanwhile, can go buy some copper wire coil to stabilize your stock speakers from being punching too hard on the bass whilst spoil your mid range. Leave to bass work hard on your rear speakers, and that's sufficient. Cheap & cheerful stock mod for budget ICEr

go corner and suck thumb like the rest.

This post has been edited by iskazulka: Nov 19 2014, 05:12 PM

ok.