kk thankss dude...
i try it out..

some of the link was brokern or removed page

U 'd specify which ones r they so dat ianho may do somtin' like removing 'em

This post has been edited by bombman: Oct 30 2006, 02:26 AM

elo, any tips how to spray gradient style on my casing? black-blue, etc.... but gradient style

where to find 120mm fan filter? i search through lowyat but cannot find. OP was closed when i went there. i only found the evercool spiderman fan that comes with filter but costs RM49 at AllIT.

This post has been edited by Skylinestar: Dec 10 2006, 06:05 PM

dude, i had the same experience with u.. OP doesn't sell them heck only ALL IT in LYP sell them.. Fan filters u nid to get them from bulk or ask ianho to custom make it

If u want it look clearly as clearly separate lines, then spray whole surface either color. Then u may stick on masking tapes, spacing 'em evenly. And spray the other color

The other method is 2 spray alternate colors w/o masking


If standard type, u may PM me (only 12cm available)

What items can be used as home made fan filters? I heard someone say smtg abt ladies' stockings...

I tot of sponge.. like the spiderman evercool filter but that will definitely limit the amount of air going in right?

Can anyone gimme some advice on this?

yup, can ask uncle ianho about his pantyhose filter......

anyone know where still can get vantec sleeve kit?

Hi , can i noe except screw the acrylic to ur side panel can i use double side tape and tape it ? and also can i noe how to paint my hold casing lyke dis http://img366.imageshack.us/img366/6659/ic...lameshi2zg9.jpg

isit vry hard 1 ? ^^

Can use double-sided tape, epoxy, hot melt glue etc. Many choices of adhesives indeed

Either airbrush or u can design urself a sticker, paste it on top of the desired surface & start frm there


coolice : Vantec's no longer available. Replaced by VIZO

This post has been edited by bombman: Dec 16 2006, 02:24 AM

design a sticker ? how do i do dat , i don hav that machine , boobman got sell ? hehe or any1 in dis forum got sell it ? thanx

Aiseh, i thougt i already done posted asking for Casing mode to install the chassis Fan.

well, is there anyone already done with Case modding for eg: side chassis Fan and Above chassis Fan

there are plenty actually.
check out some worklogs on this section..u may find it

Hmmm..it is hard to find from one post to other post here since the post is too many to read. Can you suggest which post/page i can look at within this worklogs?

so i got my case with 120 fan inflow on front, but 120 fans outflow from side and back, and 80 fan outflow on top. plus the psu 120 outflow. fuh! so, now my case is in negative pressure rite? issit ok? got any suggestion on which fan i should change the flow? ive tried the side 120 fan to be inflow, but mobo seems to be hotter..

I think from the side you should let the fan to inflow state.

i've tried it b4, but the temps is getting hotter. i guess the airflow got stuck under my gc.. huhu..

Send to IanHo...solve problem....he should know..or else you can consult sniper on the roof...he will know what to do..both of them are sifus..