Outline ·
[ Standard ] ·
Linear+
Case Modding FAQ
|
kalakatu
|
Feb 3 2007, 02:43 AM
|
|
QUOTE(karom @ Feb 3 2007, 02:30 AM) Aiseh, i thougt i already done posted asking for Casing mode to install the chassis Fan. well, is there anyone already done with Case modding for eg: side chassis Fan and Above chassis Fan there are plenty actually. check out some worklogs on this section..u may find it
|
|
|
|
|
|
kalakatu
|
Apr 2 2007, 03:42 PM
|
|
QUOTE(TheXxBestxX @ Apr 2 2007, 03:13 PM) pls add me. i want to add another fan. how to connect it to mobo? i using intel d101ggc mobo. the fan i gonna connect is look like this:  the light i will be using is : http://www.modernopc.com/store/index.php?m...7b3382276b3c8cb er..sir, may i ask, what do u mean by "pls add me" ? add u to/for what?
|
|
|
|
|
|
kalakatu
|
Apr 2 2007, 04:12 PM
|
|
usually the branded fans such as CM, TT and Evercool, the fan come with 3pin connector, but package contain the molex converter as well. and to add the fans, it depends on u, if u want to use the 3pin u can connect it directly to the motherboard if there is/are slot available.. and if u want to use molex, just connect it directly to ur psu..done..
|
|
|
|
|
|
kalakatu
|
Apr 2 2007, 04:53 PM
|
|
refer to the picture  the box (in the red lined box) is inverter. as u can see at the upper part of it ( green lined circle) is 2 wires connecting to ur ccfl tubes.. while the lower part ( yellow lined circle) is a wire to connect to ur psu.. well, usually it connect to pci controller/switch first then it goes to psu.. got it?  PS - if the picture is not clear enuff, u may want to zoom it at the inverter part.. This post has been edited by kalakatu: Apr 2 2007, 04:55 PM
|
|
|
|
|
|
kalakatu
|
Apr 2 2007, 06:56 PM
|
|
QUOTE(TheXxBestxX @ Apr 2 2007, 05:48 PM) can u show me what molex cable? maybe a pic. i just a beginner with the computer world. this is molex (after this google a bit lar..  ) so u might want to google it to determine which is male and female..
|
|
|
|
|