What headunit is that ar? Max speed 282??

quiet for 6 hours already... many member here otw balik kampung?

This post has been edited by nncl: Jul 25 2014, 02:36 PM

8am at sc, 12pm baru siap service... lol

20k km service? last time i went for 40k service, 9am reach, 11am my turn and 1.30 settled...

10k km, my turn is like 11:30, but very fast since i was there beside my car the whole time so the dude can't slack
and i told him fluids no need check since i check them all the time myself (but he still check anyways as per SOP lol)

just didnt need to top off since they are topped and i instructed no need to bother with the washer fluid too.
helped him to open up the EO bottles too and minor misc stuff, so things can be done easier/faster

mainly, i completed my objective and collected my used oil sample preparing to send to USA blackstone labs soon

LOL... u still managed to stop them for slack, mine even i stand beside there still gonna wait and wait

I have inspira manual
Recently i found abnormal noise, may pistons knocking or valve tappet.
Wonder other 1.8cc manual here have same
Drive at 4th gear at RPM3500, down shirt 3rd gear, press acceralate pedal from RPM2500, the abnormal noise occur.
I open the driver door windows.
You guys experience this or can try it out?

This noise/ sound usually can hear from wira or iswara at same drive condition.

Thanks to share

Wish to ask Sifu here, is that any different between Inspira and Lancer front absorber? Seem my one having issue and possible replace in year end.

No going for adjustable.

Shell product for Inspira:

RM410 is cheap wor...I paid RM460 per tyre including valves.

I've been using the past 10 days...it's quiet, better grip during braking. Haven't tired on wet conditions..no rain so far

Of coz the tyres are new, let's see how it is after 7 - 8 months.

After changing the tyres, the engine sounds louder and can hear more minor rattles

Dang...then i better change to cheap tyres!!!

amazing... size like tat can drive such big car

ooooooooooo

http://s02.static-shell.com/content/dam/sh...xmebrochure.pdf

http://www.epc.shell.com/docs/GPCDOC_Local...(en-GB)_TDS.pdf

updating my spreadsheet

amsoil/redline mtl still in the lead.
lightest viscosity on cold start is on amsoil @ 48.3
shell however has the lightest viscosity after heated up (which explains the lower VI) @ 9.55

exactly what i think lol


last time changed from cc5 to neuton800000000

i was like; why so noisy

then i think; its good too becoz can hide the annoying rattles

maybe the tech/foreman that worked on my car wasn't a slacker to begin with

rofl it took me a bit to realize

ok.. later i try take out all my tyre, sure no sound.. wahahahahaa

what kind of engine oil u use for it?

0-30?

This is?

The owner said his 1.8cc manual ma
This engine size 1.8cc lo.. No need engine oil geh..
Run on nitro