Campro itself already a hot engine running by design. I did not encouter knocking running full throttle during kl- ipoh run on broad day light. However, according to gt auto if want to achieve optimum power from the engine need to reduce the compression, and increase the boost.

The water injection cost around 2500 rm, usually the injection only use during certain rpm and not through out the entire rpm range. So give n take around one week if u kaki tekan need to top up.

From engine idle until rpm cut off. But full bost around 1.5 k, idle around 0.2 boost already.

Word of advice,

If you want to BOT or Supercharger your CPS, please make sure that your car or your CPS has a Manual Tranny attached.

Else you will end up having a bad Auto Transmission experience as the TCU can't do proper calculation on the newly gain power from the flywheel.

Hey brother ajaibman, do you have any advice on stand alone engine management ?
My CPS R3 is stock, I just want to do stand alone and fine tune the stock engine.
So do you have any brands/workshop that you can intro me to? I am new to this.
Thanks in advance =D

Wow...such strong poison, supercharge & turbo..

Saw the water injection kit aem brand, is it the same thing?

Going on full stand alone is.a waste of money unless your car is fully mod or had some sort of force induction.

A piggyback will be more than enough to tweak your engine to the optimum effect. (make.sure.its compatible.with close loop ecu)

Example: smt8, dastek unichip, works ems2

Have you do the basic mod like extractor exhaust full system and.crank/cam pulley + fuel.pressure regulator tunimg.yet?

the most unproductive slow f̶u̶c̶k̶i̶n̶g̶ ̶ tered in Lowyat hiphip..horiooo

I see... I haven't got any of those.
Due to budget constrain, I am actually saving up for all these. Hehe.
Thanks for clearing up for me.
I'm looking at changing full set exhaust system, light weight crank pulley and fuel regulator only...
If I can get the R3 specs High Cam lagi best...
then with all these installed then I shall proceed with piggyback.

This post has been edited by kobzng: May 9 2014, 12:49 PM

All active in Facebook punya pasal..
Hehe.

Our Bro Marzuk88 using MatSpeed R3 Hi-Cam with R3 ECU and other mods, (fully loaded)
Tempting to try his car if he is in KL.

Other Bro like lowpro also completed R3 exhaust system with R3 ECU too,
I guess he should satisfy the engine output, period.

Bro TripleJ104 is the only Waja CPS that using R3 extractor only I guess?

Bro sphiroth rarely come in anymore, his Waja CPS used to have many modding too ..

Bro kobe10 engine meletup and changed to Mitsubishi engine already if I remember correctly.

Bro ajaibman is the only Supercharged Exora CPS that I know..

Ultimately is our taiko Azuma-kum already de-moded liao..

Who else I missed out? LOL

Single reply only can tag 5peoples only pula..

(Y)

i've skimmed my flywheel and am using 1.8L clutch now. also, using a wider air filter intake plus fuel regulator.

This post has been edited by lowpro: May 9 2014, 05:37 PM

Bro R.Y.D.E.C.K still using Waja CPS?

Please share more if you don't mind,

coz I believe my car is time to change clutch as well.

which 1.8L clutch cover/plate you are using now?

Wira/Satria GTi?

Hehehe...Engine meletup already then change to Mivec...But due to halfcut condition, I need to slowly change all the parts... Mounting all pecah, suspension all byebye already...Just purely maintaining it only. Guys if you all want to play with semi race clutch, I can intro you to a shop that custom your clutch plate. Just bring your ori clutch plate to the shop and the guy will do it 6 puck with higher quality clutch plate. At Jalan Ipoh... 350 only.... very grippy oh...

Hahaha de-mod is the most painful things to do

My clutch is an exedy 8.5 inch for 4g93. The flywheel has been skimmed to suit the clutch.

Hmmm...

info extracted from Exedy Malaysia website:


No issue on the additional 15mm?

I guess only me use r3 header. Else like bro ah paul & bro marzuk use full r3 exhaust system. But still i cant beat mutt cps ride. Exhaust system by kaki exhaust only, but very fast above 140kmj

@lowpro, i would like a review & tips about skimmimg the oem flywheel. Im thinking of this too..

I have seen the Lotus Neo with Black Extractor is that the R3 one? or different? because I heard that black extractor cost a bomb..