Irenic bila nak insaf ni?

Will take it out and remount the heatsink again later on, probably not tight enough

Hey guys i am thinking of getting a new CPU cooler for my E6300+DS3. Any suggestion? Don't want giant tower heatsink like Ninja or Ultra 120, my casing cannot fit . How about Ultra 90,XP 90C, TT Big Tyhoon VX, which one is the best? I am leaning towards ultra 90 or xp90c cos both not so big and heavy

Gonna stick to low noise fan, cannot tahan those screaming delta at 7k rpm back in the old days . BTW, my load temp at 2.8ghz already over 70c using default cooler @ default vcore, is that something to be worried about? Even at 2ghz also temp ~60c load

I don't dare to dual prime it for more than 1 hour lol, at default vcore 2.8ghz using stock cooler temp already over 70c... wait till i get better HSF then i post the results here , but i am just using KVR, won't break any records for sure

WTA if any of u guys know which shop selling Artic Cooling products? Interested to get their CPU/Graphic card coolers

Wah that gigabyte cooler so expensive? Performance on par with watercooling ka?

Hehe, get at least Asus P5B to match your 2 monsters there, DS3 not for u lar . Processor already so expensive don't skimp on mobo , try get Asus P5W series if u can, but so hard to find it here

Irenic did u raise the mch voltage? FSB voltage as well? I suppose u do, mind to share the settings?

Well if on tight budget just buy DS3, won't dissapoint for sure. A lot of users here, i can personally vouch for that . Just upgrade later when u have more $$$

Be sure to keep us updated bout the OC results, currently dun dare to push it above 3ghz temperature is worrying me

Still waiting for my xp90c from bulk order, probably can get it earlier next week. My temp at 2.45ghz is 60c right now, and the system temp is around 45c . BTW, i noticed some users installed a small fan on top of the DS3 chipset HS, how to do that? Cos i have an extra 50mm fan

Yahyah maybe, i just did measurement. The fan is the same size as the HS, probably have to figure out a way to mount it some other day

Wah that is your 24/7 setup? 72c is kind of worrying to me , i prefer it to be lower than 60c for daily usage

60c is still ok considering our hot ambient temperature here, i guess that's nothing to worry about.

Wow finally, welcome to the club . The stock HSF is pretty ok for e6300 and e6400 but i doubt it will work nicely for e6600 , time to change a new cooler . As some users of xtremesystem noted, some conroe IHS are not flat and that lead to abnormal temperature

Those P965express chip is known to be running hot, i guess it's almost the as my previous Nforce 4 SLI . I touched the HS on the DS3 and it's burning hot when oc, even no OC already hot to touch

Nice board but cannot oc well, ever try updating bios? Just wondering, 350mhz FSB is very weak

Your load of 68c is pretty normal for that kind of speed assuming u are using stock cooler , the 4ghz club is waiting for u

Well it seems to me that i am not the only 1 having high temperature . My e6300@2.45ghz is giving me load temp of 64c while idling at 48c using stock cooler, guess my contact isn't good as well