AMDŽ Socket-AM2 Overclocking thread, discuss our setup/overclocking issues
|
|
 Jan 1 2007, 12:19 PM
Return to original view | Post
#41
|
 
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh   
|
I don't think cpu-z show PCI bus speed.
PCI bus speed should be fixed all the time. I not sure ur gigabyte board as I never play with it b4. If PCI bus speed raise when u oc...that's weird. Flash to latest bios? |
|
|
|
|
|
Jan 4 2007, 01:03 PM
Return to original view | Post
#42
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(Shengz @ Jan 3 2007, 10:18 PM) Oh goshhhhhh... My CPU really get me gone mad.. Prime stable for 48 hours.. But once I simply run programs, it will crash.. What the heck is holding me back? My RAM? Or the mobo? No BIOS update available currently.. Quite regret getting this mobo.. disable CnQ, disable any smart fan control.  post out ur memory timing setting. (hopefully not all AUTO) try stress ur ram or run the ram at ddr2-533 (if ur ram ddr2-667). |
|
|
Jan 5 2007, 11:05 PM
Return to original view | Post
#43
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
Shengz, 1.575vcore is a bit too much IMO.
1.25v should get you 2.5ghz easily. I don't believe u need to pump so much to go 2.7ghz  Try memory setting below QUOTE tcl = 5 It works on 6100-am2. tweak it to fit on your tf570u.trcd = 5 trp = 5 tras = 15 cpc = 2 trrp = 3 AsyncLat = 8/6 while 8 is for stability trc = 13 key memory timing to run at high HTT twr = 5 trwt = 5 twtr = 3 tref = 3.9/7.8 read DQS skew = AUTO read delay from Rx FIFO = 2.5 DRAM drive strength option DRAM driver weak mode = normal the rest according to order from top to bottom set 1.5 1.5 1.5 1.0 1.0 1.0 Dram bank Int = Enabled DQS Training = Skip DQS the rest according to order from top to bottom set Enable per Channel Disable Enable FC Disable Make sure to disable CnQ as well as set multiplier option manually as well. Spread spectrum must be disabled as well as LDT upstream/downstream from 16x to 8x, NB ---->HTT set from 4x to 3x. That's it and hopefully this does help in some way. If you find this useful, pls share this in the thread later for other forumers ref as well. It was given by PCcrazy to me and it does work on my 6100-am2 and tf550. Or u can just lower multipler to oc the HTT This post has been edited by allenultra: Jan 5 2007, 11:05 PM |
|
|
Jan 6 2007, 05:26 PM
Return to original view | Post
#44
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(mr_habuk @ Jan 6 2007, 10:31 AM) BTW..allenutra..can that timing works with mine too?? using M2N-E with DDR 800..  |
|
|
Jan 24 2007, 11:26 PM
Return to original view | Post
#45
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
kalakatu, consider the board soulfly using.
For an around RM300 board, that will be the best overclocking board available.(if u into OC) If not, just get the cheapest option available. |
|
|
Jan 24 2007, 11:35 PM
Return to original view | Post
#46
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(kalakatu @ Jan 24 2007, 11:31 PM) thanks for the suggestion given tf550? so i think ill grab TForce 550 then..  but just one more question - can CM Hyper TX fit nicely on TForce 550 without problem? Not the DFI Infinity nF-M2 ? Is HyperTX bigger than XP90? XP90 fit nicely on my TF550. I would get the DFI Infinity nF-M2 if it available when I bought my tf550. This post has been edited by allenultra: Jan 24 2007, 11:36 PM |
|
|
|
|
|
Jan 24 2007, 11:42 PM
Return to original view | Post
#47
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
Well the DFI is around RM320 in garage sales. I believe TF550 around RM290?
Let me know the height of hyper TX |
|
|
Jan 24 2007, 11:53 PM
Return to original view | Post
#48
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
If you don't mind, would you get the specs of XP90?
UTP internet connection is slow like snail now. I'm using casing Coolermaster Centurion 530. Thermalright XP90 + 38mm think fan. And there are around 5cm space between the fan and the side panel. Hopefully the height of [xp90+38mm+50mm] > 136.5mm  |
|
|
Jan 25 2007, 12:02 AM
Return to original view | Post
#49
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
Well....u can calculate it urself don't you?
75+38+50 = 163mm Its way more than the height of Hyper TX. Unless u using micro ATX casing, I don't see a reason hyper tx will hit the side panel. This post has been edited by allenultra: Jan 25 2007, 12:04 AM |
|
|
Feb 1 2007, 07:35 PM
Return to original view | Post
#50
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
coolblade, latest bios revision solved the PCI bus unlock problem.
Please get any bios newer than BIOS N5TAA615.BST. It isn't about the board revision, it should be the bios instead. |
|
|
Feb 3 2007, 01:29 AM
Return to original view | Post
#51
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(kalakatu @ Feb 2 2007, 10:55 PM) ops..one more question.. just install the x2 optimiser will do.for dual core users.. is it really need to install those software; - AMD Dual-Core Optimizer (downloaded -> link - AMD Athlon Driver (provided from driver cd) btw i installed the athlon driver..do i really need to install that x2 optimizer? sorry for being n00b on dualcore proc..  thanks athlon driver....din install.....how about uninstall it? |
|
|
Feb 4 2007, 09:47 PM
Return to original view | Post
#52
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
coolblade
for athlon64, multiplier is unlock downward. while for FX series, multiplier fully unlock. |
|
|
Feb 21 2007, 02:16 AM
Return to original view | Post
#53
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(zamree7 @ Feb 20 2007, 11:33 AM) haha.. found it.. thanks mate for the info.. but right now my proc holding me to reach DDR1000.. lower the CPU multiplier, then raise the ddr2 speed. then proc won't hold you back anymore. |
|
|
|
|
|
Feb 21 2007, 02:23 AM
Return to original view | Post
#54
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE tcl = 5 trcd = 5 trp = 5 tras = 15 cpc = 2 trrp = 3 AsyncLat = 8/6 while 8 is for stability trc = 13 key memory timing to run at high HTT twr = 5 trwt = 5 twtr = 3 tref = 3.9/7.8 read DQS skew = AUTO read delay from Rx FIFO = 2.5 DRAM drive strength option DRAM driver weak mode = normal the rest according to order from top to bottom set 1.5 1.5 1.5 1.0 1.0 1.0 Dram bank Int = Enabled DQS Training = Skip DQS the rest according to order from top to bottom set Enable per Channel Disable Enable FC Disable Make sure to disable CnQ as well as set multiplier option manually as well. Spread spectrum must be disabled as well as LDT upstream/downstream from 16x to 8x, NB ---->HTT set from 4x to 3x. Try this. I get it from PcCrazy. Working nicely on my tf6100-am2. You only get these timing options available with the 505 or 505modded bios. Go get one if you are not using either of them. RAM divider kinda low, u can try ddr2-533 instead if you are using ddr2-667 . Or just use ddr2-667 and pump the vdimm to 2.2v |
|
|
Feb 22 2007, 12:41 PM
Return to original view | Post
#55
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(zamree7 @ Feb 22 2007, 12:10 PM) actually i tried this before..my ram is DDR667 using biostar Tforce 570U..the thing is my divider is max till DDR667.. bios update perhaps?I've set the maxclock to DDR800 but nothing happen.. its take DDR667 as the max speed.. Dunno whether this is a bios problem or its just the mobo set the max according to my ram spec(FYI i can set my ram to lower divider DDR533) ..  well it the same, just lower the CPU multiplier. start from ddr2-667, just push the HTT way up with max vdimm. |
|
|
Apr 10 2007, 10:43 AM
Return to original view | Post
#56
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
Asus, for default vcore. Try check with coretemp or CPU Brain Identifier.
I believe your 3000+ with 1.25v vcore. The 2 biostar board with me, both tend to overvolt a bit compared to the value set in the bios. You should be able to achieve 2.5ghz with 1.25vcore, provided your board can reach 278HTT |
|
|
Apr 13 2007, 01:40 PM
Return to original view | Post
#57
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
Amedion, its normal.
Not all AM2 board can go over 300HTT. Especially Biostar motherboard. DFI board does break 300HT margin though. |
|
|
Apr 13 2007, 09:12 PM
Return to original view | Post
#58
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(davidletterboyz @ Apr 13 2007, 08:30 PM) My previous biostar reached ~335HTT no problem....how to do it? read below I know it.Yeah but pcmoddingmy was using clockgen. My previous 570U wont pass 280HTT from bios. Needs clockgen... Clockgen does help but still I can't break it t6100-am2 over 280htt. Not all biostar board oc like mad with Clockgen. Pcmoddingmy tried 420HTT on tf6100-am2 but its once in a blue moon, how many out there actuall can do the same? Biostar produces good motherboards but not their bios. This post has been edited by allenultra: Apr 13 2007, 09:13 PM |
|
|
Apr 14 2007, 11:24 PM
Return to original view | Post
#59
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
Just use any alcohol will do. Those small bottle where meant for cleaning video tape recorder, cost few bucks each.
OP, They still open? U can find AS5 in Garage Sales. byfc2010, for 6100-am2. I believe 505RH bios is the best available This post has been edited by allenultra: Apr 14 2007, 11:26 PM |
|
|
Apr 18 2007, 02:30 PM
Return to original view | Post
#60
|
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
Asus, I try to reach 2.6ghz with 3200+ when I'm back home.
Now I'm running it at 2.5ghz, stock vcore 1.25v. You sure u need that much vcore for 2.6ghz? |
|
Topic ClosedOptions
|
| Change to: |  0.0227sec
 0.28
 7 queries
 GZIP Disabled
Time is now: 1st December 2025 - 11:58 PM |
Quote