yup..i did..i played with vcore around 1.5 - 1.55..but still below than 1.6v..scared la to out  a vey high voltage with my not-so-good heatsink..

managed to get onto window..but bsod appear when in full load..
2.2v vdimm?hoho..scared oso..anyone here put 2.2vdimm with biostar tforce 570u?

2.2vdimm?? why my mobo(biostar TForce 570U) vdimm max till 2.1v oni

i think maybe ur proc limit oc to 2.5Ghz.. try change the proc and see how??

interesting news... any source about it?

Bro.. its AMD.. the ram clock is depend on the divider itself..
for example:

250FSBx10 = 2500Mhz - RAM = CPU/6 - 416Mhz(DDR832)
270FSBx9  = 2430Mhz - RAM = CPU/6 - 405Mhz(DDR810)
250FSBx10 =2500Mhz - RAM = CPU/5 - 500Mhz(DDR1000)

so wat i need to get my ram running DDR1000 is either my proc can reach 3000Mhz( which is nearly impossible ) or get the CPU/5 divider (which is i dunno how to get it )..  

anyone with DDR667 with Biostar Tforce 570U can change the divider to CPU/5??? and yet still couldn't find any update for my bios..

first round....

[attachmentid=197023]

sighh..anybody can help me solving my problem??

Hi guys, Im planning to get new AM2 proc. I preferly to get AMD64 X2 3600+ AM2 proc with 256kb*2 lv2 cache due to my budget limit.

After looking at yhis thread rank, I observed that AMD64 X2 3800+ AM2 proc with 512kb*2 lv2 cache would give more promising in overclocking.

But i just read on one artikel that show 3600+ and 3800+ are on par with each other...

My Webpagehttp://www.digital-daily.com/cpu/athlon_64_x2_am2/index03.htm

So..guys, ur personal opinion, should i go for 3800+ or 3600+? 

thanks

hey guys

im at 255 fsb now with my x2 3600+...problem is my ram divider is at 400....if i go higher it wont even go to the bios, and there will b 1 long beep and 2 short beeps...i tried to set my multiplier lower and fsb higher, also cannot..y ar? not enough vdim? its at 1.95v (board max)

thanks!!

I planning to get AMD AM2 3800+ 2.0GHz pair with either

1. MSI Nforce 550
2. Biostar Nforce 550

Which is better oc motherboard? Not planning to oc high cuz I getting normal kingston value ram. Hopefully I can oc till 2.8GHz. But to reach that do I need a better heatsink and performance ram, motherboard? Or it is easily within reach of any matching hardware.

Is ur mobo specs same as the one listed in ur signature?

according to the table, at that setting your DDR2 should be running 432MHz. was that at 1T? if yes... that might explain it.

tat means u nid 2t lor...

I'm not referring to performance... I'm referring to voltage requirement.

tight timing = higher voltage

as simple as that

guys, Im on my way to buy AM2 motherboard..my question is, can i use ddr400 ram into ddr2 board?

sorry for being nobbie..

as i not forget, there is one Abit mobo that have 4 slot...2 slot for ddr1 and another pair for ddr2...but forget the model name..

what is the different between Biostar TFORCE 550 and TFORCE 570? Im willing to buy one of these mobo in which my budget is around RM250

thanks

maybe differences in Trtp? Trc? Twr? Trrd? TrwTO? Twtr? Twrrd? Twrwr? Trdrd? Tref? Queue Bypass Max? Max Async Latency? Idle Cycle Limit? Trfc?

all these changes when you use different divider, and they affect the memory controller and ram. memory timing is not only 5-5-5-15-2T...

ya wat's ur clock speed?? if stock clock speed got that super PI value it is impressive man..