ive talk to the guys in OP just today...
he said the bracket for am2 will arrive around next month..
price maybe around 25-30.....

typo..im using si-97A heheheh

hv just setup a mechine for my friend

3800+ windsor | K9N Neo | Colorful 7300GT DDR3 | 512mb Kingston DDR2-667 | AMD stock cooler

overclock a bit 2.0 > 2.3Ghz...

but its not mine ... i'm still using barton

This post has been edited by syazone: Aug 10 2006, 07:54 PM

Same PCB does not mean the components are the same (take into account all those resistor values)

lol think about it also.. but afraid to try.. let someone else do first..
coz still ok for me... in default voltage also i can get to 700DDR..
now running at 215fsb.. will increase by time.. fast enough.. only think about gpu right now...

i think it's just the same the different is no extra 16x pcie slot replaced with 4x

Can Biostar Tforce550 support 7900GT / X1900XT? Im not sure, using such a powerful card on a budget mobo. Will it be ok?

This post has been edited by Merlin_of_light: Aug 11 2006, 10:59 AM

AMD 3800 x2 AM2
ASUS M2N-E
1gb ram corair or kingston
XFX 7600GT
ACBEL 450 watt PSU

Regarding to my spec above...
can any senior or proz.. suggest which ram should i get?? if i going to get hyperx ram.. corsair,kingston or any oth?

Why not? All PCI-e 16x has the same standard regardless any type of graphics card.

Just bear in mind.... M2N-E probably wont work with performance RAM that is SPD-rated to run at 2.0v minimum.

Yeah, M2N-E voltage for ram is limited. I wonder why, since it is a mid-rg mobo. Why not get the DFI nf4 Ultra-II M2 if you are afraid of RAM problem? It's cheaper than M2N-E isn't it?

hello guys...can i join in?i just change to 3800+ X2 Windsor F2 ...see my sign...

i saw M2N-E's price below rm400

lol almost same like mine.. nice isn't it? can start oc then...

New BIOS released for BIOSTAR TForce 550



Download link : http://lejabeach.com/Biostar/6100-550/6100550bios.html

almost same like u la...haha...actually i dont know much bout ocing...

just test it but it seems no different with earlier bios

try to learn and join the club

i'm using GIGABYTE GA-M55SLI-S4 board, wat kind of ram best fit to this board?

now using Mushkin DDR2-533.

thank...

so which ram should i use for my spec?? can anyone suggest?

reason to join this club is to learn lol...

enjoy this~~!!

http://doubleclick.inc.md/inno3d/Inno3D%20...st%20Report.htm

p/s: soulfly...promote more of TEAM la...hehehe....moq=20kits la...

same mobo! actually i'm not sure about this mobo maybe this mobo can support up to 333mhz only i got a KVR5300 667... but my cpu-z is showing that max is only 333mhz

hi guys..jus try oc my x2 3800+..but cant make it 2.3ghz above..
i hv try run it at 2.3ghz with 1.45v vcore, 2.80v vdimm and 3-4-4-7 5:4 timing with HT freq 4x/3x but after 7hours prime..its stop..can help me?C&Q disabled

this my spec:

amd64 x2 3800+ s939
abit kn8 ultra
512x2 corsair xms c2pt tccd chip
x800xl flashed to x850xt pe
520w ocz modstream
xp120 with 12 cm fan
200gb sata hdd

erm btw my full load temp is 58'c..izzit ok for dual core?

This post has been edited by mfcm: Aug 12 2006, 02:36 PM

its DDR 667 (333x2)


have u disable K8 Coon 'n' Quiet at bios ??