I think just the contact niah.... reinstall the heatsink ler. Don't terlebih with the thermal paste. The rice grain cliche cukup di

maybe i will go to buy the AC themal paste n try again.. >_< cause i buy the cooler master 1 is RM25 only... maybe it is too chep n no use... try another 1 1st..

have u ever try touch ur heatsink wit ur fingers???

nope its not a joke... try it... if its around 50C or more... ur finger cant hold it... if u feel warm... its most likely below 50C...

*the reason is... there a some mobo wit stupid temp sensor even u have updated wit the latest bios...

ps:beware if ur psu/pc got electric leakage... im not responsible if u got electric shock...

I'm seeing the Coolermaster Thermal COmpound is the culprit here. It has a rather ' hard plasticky' texture, making it hard to be applied. U need to physically 'heat' up the thermal compound by soaking it it hot water. Try removing it completely and replace with other compound.

Then, just go for ARCTIC SILVER 5 Then...

yap planing to buy it.ARCTIC SILVER 5. but no money now.. >_<

all big boss here.. last time i'm using coolermaster themal paste.. now already change to Arctic Silver5 buy from lowyat overclocker's paradies shop.. but the CPU temp still same... >_< WTF... the Arctic Silver5 have fake 1 ah?

for thermal paste, AS5 needed some time to cure down, that's when you get the best of it.

what really matter is the heatsink. don't expect 5'C difference with just changing thermal paste.

could be ur mobo, i usung biostar with my watercooling kit which contain dual fan radiator and apogee block and d5 pump yet still the temp for my opty 144 after oc 50c at load using speedfan4.28, but 44c using core temp to take readings... probaly mobo sensors.. plus i heard tht dfi report lower temp using smartguardian, i recommend u core temp or speedfan 4.29 to take the readings cause speedfan 4.29 gt one reading call core which is same as core temp...

errr...stupid question...but ur air flow chun o not???

if too many fan but cacat airflow oso can kacao one...

to test...try open ur case and run n see...then slowly adjust ur intake and exhaust flow...

btw did u apply the right usage of AS5?...the rice grain cliche is the most practiced...

ok i wait n see

mm.. i try it..

my air flow sure damn good liau... depan 1=120mm & 1= 80mm fan.. belakang 1= 120mm .. bawah 2= 80mm fan no place to put fan anymore...
n yap i apply right liau....

n want to ask in market have fake AC5 ?

i heard biostar temp got issue even ur have flash to latest bios.

wats ur temp open case???

maybe the last thing u should do it try to get a thermocouple setup..hurm, i only using it while in manufacturing group when i in Sony production corp..they use thermocouple which easy to install..based on electrothermomagnetic (izzit? ah~ sudah lupa the term suddenly )

using a real time hardware is really efficient..u can calibrate it via testing it with hot water...since water only max to 100celcius temp..but i will give u a very fussy prosidures...hurm..

ah~ btw my pc temp is 58~59 for full load using the same proc as ur and rite now running on stock cooling hsf only~ hehe afterward will change to xp90c oso...still waiting my xp90c to arrive

Does this hsf support am2 mobo coz planning to upgrade to am2

am2 socket 940 rite?? if so..the hsf support am2 proc btw..conroe rock rite now~ didn't interested??

Conroe rocks but it rocks my pocket too heh..might consider that proc too if got xtra $$

HAHA.. last time i also planing upgrand my pc from P4 2.6c to conroe but same reason wit u so change to AMD3500+... now save money planing to change to conroe end of next year,,.. heh he..

so back to topil.. the XP-90C can use some "gel" to "lap" it or not ah?

This post has been edited by Guriseruda: Aug 21 2006, 09:20 PM