Hi guys,
Do you guys know how to disassemble the driver side door panel ? Well, recently my PE central alarm was sot already.
When slam/close the door, it auto lock the door (randomly). (I din press remote / Handbrake is engage / Brake Pedal is disengage / Car engine is started/off)
This happen quite random. And i suspect the door lock gun on driver side is the one who cause that.
I test with Open the door (Leave the driver side door open), then press Lock Door from control panel, all door lock except the driver door which go lock on half way then unlock again.
Then tried use hand manually press the lock knob down, it was stuck at middle and cannot press further down.
But when i close the door and try, it was able to function properly as well as the door knob.
Sometimes after drive the car out from garage, step out from car while engine on to close the house gate, come back wanna open door, ishhhhh~~~~ when i pull the door handler , it lock the door on the spot.
or sometimes when i slam / close the door, it auto lock itself >.<

scary , macam got hantu.....
Beside that, the aircond also got hantu

, insert key, turn to ON, the aircond sendiri will on itself then off then on then off, sometime auto on for certain second then off. I have to manually turn the know on then off then only it permanent off.
Check from many forum , i think this is common issue on persona. Some owner change the panel but problem might come back again, the panel cost RM700+ (gila price).
So i just leave it

Don't leave the knob near the off setting (low temp), switch it a few click higher and see if it off itself or not. If the knob is indeed loose, the temperature will go higher and lower and vice versa, will not off coz off is a few clicks away. If knob loose and warranty over, you have no choice but to leave it or pay for it. My panel changed since 9 months ago (changed near end of warranty). So far, no re-occurrence yet.