You mean spacebar? You can do it eitherway:

1. Forcefully push the space to a side and then lift up the other end out of the steel wire.
2. Remove the stabiliser inserts and take it out (if you had no idead how to reinsert the insert, better don't use this way).

I think you need to make sure that the spacebar stabiliser stem spacing (LOL, 4S) are 10cm sharp (or at least, 9.9xxcm) then won't have compatibility issue.

Need to access from the back, unscrew (if any) and start prying the edge to get the top case off. This is the norm for disassemble most keyboard.

From the inputs so far, we can deduce that a standard 6.25x spacebar stabiliser stem spacing is 10cm sharp (or may be with variance of a little less than that).

Now, need some inputs for the spacebar (keycap) stem spacing, particularly the stock one (cause I myself actually had many kbc/vortex spacebar already, most measured to be 9.9cm exactly with the exception of the white DS pbt from vortex/ikbc, 10cm sharp).

This post has been edited by Human10: Nov 24 2013, 12:06 AM

The spacing for keycap stems is 9.9ish?
For stabiliser stems is 10?

This post has been edited by Human10: Nov 24 2013, 12:08 AM

Why suddenly so late in the night you try to open the case? Will void warranty one...
Thx

This post has been edited by Human10: Nov 24 2013, 12:10 AM

Ada wang, ada amoi solusi senang,
http://item.taobao.com/item.htm?spm=a230r....&id=17770989224

Yup. It is your choice to choose backlit one with red led with backlit keycaps or non backlit one with POM keycaps and DIY it.

Note that their profile is Cherry profile.

This post has been edited by Human10: Nov 24 2013, 02:29 AM

If you don't like red led, might as well get non-backlit and DIY (may need to change the resistor though).

These are the few shops remaining which still got stock, have a look yourself.
http://detail.tmall.com/item.htm?spm=a230r...ed55e27b&pm_id=
http://detail.tmall.com/item.htm?spm=a230r...ed55e27b&pm_id=

Price = 470+10RMB

Assume agent rate = 1.75, shipping = 2kg = RM26

RM300 only what?

Sell your QFR and add another RM100 something then ok liao.

Then you will be the first guy here to have a red plate, red case, red wire, red switch and red keycaps keyboard.

This post has been edited by Human10: Nov 24 2013, 02:37 AM

Different lighting effect, I believe the real one should look more like this.


After you get red cable, you still don't have red plate.

Plum not as extreme as Vortex I guess (but their decision to make the PLUM96 wired version completely different from wireless version somehow shocked me)...

The 6th point, had the circuit for LED mounting.

Regarding the LED part, I think the rated LED should be 2V, not sure what will happen if installing 3V (white/blue/green) LED on without modifying the resistors.

This post has been edited by Human10: Nov 24 2013, 02:54 AM

Ok, my bad.

p/s: So you indeed had removed the case huh?

diaBoliQu3
I forget there are this picture, and I guess they didn't do any modification to the resistor.

Most backlit or backlit intended board have reverse mounted switches, to allow LED to be mounted at top as the legends are normally located on the top.

The only exception to that are those korean customs and also greedwolf blade.

Don't feel so. Better wait for better stuff.

Indicator LED on non-backlit boards normally will be installed normally (which is on bottom).

This post has been edited by Human10: Nov 24 2013, 03:09 AM

How much is the taihao group buy cost last time?
http://item.taobao.com/item.htm?spm=a230r....&id=35721611683

Fullset Cherry black POM for cheap. kaiserreich
http://detail.tmall.com/item.htm?spm=a230r...&id=17603066855


This post has been edited by Human10: Nov 24 2013, 03:38 AM

PLUM87 all got wireless one.

Only 2 version, backlit (by default) or non backlit.

In term of typing feel and printing method, PBT > POM.

POM is mainly good for high resistant to worn out (becoming shiny).

Erm, theoretically yes, but you must import from taobao, and it is Ducky Zero.

But as always, RM250 budget, better:
1. Add another bit and go for rosewill rk9000
2. Get keycool87 pbt from taobao

This post has been edited by Human10: Nov 24 2013, 03:33 AM