Wrong.
10th annivessary default voltage is still 1.8Volts.

The 2.2Volts that you see in Crucial's website is the maximum voltage that Crucial warranties their ram.
They never said anything about you have to put 2.2Volts on their ram.

Nope.
The 2.2Volts means Crucial warranties your ram at that voltage.

Any DDR2, doesn't matter what speed, the stock voltage is still 1.8Volts.
Except for those DDR2's which is above PC2-6400 800MHz

Read my post properly, then you should get the answer to your question.

Dude, where got 2GB DDR2 single stick that comes with Micron D9GMH / D9GKX?

U go read leslie0880 question again lar.

Micron D9GMH / D9GKX has never been used on a single stick 2GB DDR2.

That's because u need to adjust the timing by yourself.

That's strange, last time i used the same supertalent ram as yours too, and it boot perfectly on DDR2 800 4-4-3-8 on 1.95Volts.

You won't really see the differences.
It's just a little.

Eitherway, you're paying RM85 for a 1GB DDR2 667MHz that uses Micron D9GMH, which means if you buy two kits, you're only paying RM170 for 2X1GB what do you expect?
Even Crucial Ballistix DDR2 PC2 PC2-5300 667MHz 2GB Kit will cost you around RM300 & above.

Not to forget, Crucial Ballistix still use 6 layers of PCB, not eight.

Comeon lar, it's using 6 layers PCB mah, that's better than any valuerams that is on 4 layers PCB what?

I don't know how to answer that question myself.
Perhaps maybe your motherboard vdimm vdroop is huge compared to the board i've tested.

That's because those reviewers reviewed those supertalent while they are still using Micron D9GMH chipsets.
Yours is on ProMOS chipset, that's why u need higher vdimm's.

Refer to the DDR2 ram list.
Only the early batches of Supertalent DDR2 PC2-6400 800MHz uses Micron D9GMH, what you get isn't the early batches, around 4th to 6th batch.

I know because that ram came from me, i bulk it last time.

Have you guys heard about Micron D7 chips?

This post has been edited by sHawTY: Dec 15 2007, 01:44 AM

Wow, OCZ ReaperX HPC DDR2 PC2-6400 800MHz 4GB Kit [2X2GB] has the capability of reaching 1110 @ 5-5-5-15 @ 2.2Volts!
Impressive set of 2X2 rams.

It's stable at 2.2Volts too!



Reviews:
http://www.legionhardware.com/document.php?id=707
http://www.proclockers.com/review.php?id=281

No, but you can always buy from karom or newegg.
Good price though.

SRP is around RM659 - RM699

No.
The 2.1Vdimm is it's stock voltage for it's stock speed.

It's normal for 2X2GB rams needing 2.1Volts just to run the ram at PC2-6400 800MHz @ CL4.

That ram is warrantied at 2.2Volts.

No.

Who told you it's using D9GMH? LOL.
No Team Valueram DDR2 rams ever use Micron D9GMH la dude.

It's good, but not as good as Micron D9GMH / D9GKX / D9GCT.

Let's just say it's on the 2nd level.

Here's another WOW from me.
This time, it's a Patriot Extreme Performance DDR2 PC2-6400 800MHz 4GB Kit [2X2GB] PDC24G6400LLK!

This ram can do 1066MHz @ 4-4-4-12 @ 2.2Volts!
And what's better is that this ram actually supports EPP Profile which some people call SLi Ready.

Official Website:
http://www.patriotmemory.com/products/deta...8&id=658&type=1



Reviews:
http://www.pcstats.com/articleview.cfm?articleid=2190&page=1
http://www.cluboc.net/reviews/memory/pdp/P..._PDC22G6400LLK/

This post has been edited by sHawTY: Dec 24 2007, 03:05 PM

Here's two way for you to find your answers:
http://www.yahoo.com
http://www.google.com

It's easy isn't it?
I don't do spoonfeed, easiest way to learn is by googling.

This post has been edited by sHawTY: Dec 24 2007, 07:05 PM

This will be the third WOW from me.
It's OCZ again.

OCZ NVIDIA(R) SLI(tm)-Ready Edition DDR2 PC2-6400 800MHz 4GB Kit [2X2GB]

This ram can do 1066MHz @ 5-4-4-15 @ 2.2Volts.
And with EPP Profile, it's just perfect when it has SLi Ready too.

Official Website:
http://www.ocztechnology.com/products/memo...gb_dual_channel



Reviews:
http://www.guru3d.com/article/memory/476/1

This post has been edited by sHawTY: Dec 24 2007, 07:48 PM