Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
120 Pages « < 25 26 27 28 29 > » Bottom

Outline · [ Standard ] · Linear+

 Air Co0ling Thread, AIR HSF(tm) thread

views
     
akash
post Sep 16 2006, 05:21 PM

AK Da BEAR
******
Senior Member
1,368 posts

Joined: Oct 2004
From: Mandalorian
Hey sHawTY....Guess What???Juz oni came back from Lowyat Plaza...There is a Casing Mod shop in lowyat aight??Went there and asked the salesman there...Very Friendly...I asked about my PC temp and all..Guess what he said...

1St Arctic Freezer 7 is a good heatsink but its fan is kinda slow..

2nd he said that the temp is ok couse P4 with 1MB caching will be more hot then normal processor..So what cooler i use also , the temp will be slight high then normal temp of other processor.

3rd is about the cable management.they also do that but muz pay
RM 50...

4th my casings air system is good.No need to change anything..

5th sum mother board software wont show exact temp..He recomended me to use real termometer to check the temp..

Final Answer My PC dun have any problem with the temperature...Hehehehe..Now oni happy... rclxms.gif rclxms.gif He said my Idle speed is ok..Its abit hot couse my P4 is 1MB caching..He said dun worry its ok.. biggrin.gif tongue.gif tongue.gif biggrin.gif biggrin.gif
TSsHawTY
post Sep 16 2006, 05:44 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
QUOTE(akash @ Sep 16 2006, 05:21 PM)
Hey sHawTY....Guess What???Juz oni came back from Lowyat Plaza...There is a Casing Mod shop in lowyat aight??Went there and asked the salesman there...Very Friendly...I asked about my PC temp and all..Guess what he said...

1St Arctic Freezer 7 is a good heatsink but its fan is kinda slow..

2nd he said that the temp is ok couse P4 with 1MB caching will be more hot then normal processor..So what cooler i use also , the temp will be slight high then normal temp of other processor.

3rd is about the cable management.they also do that but muz pay
RM 50...

4th my casings air system is good.No need to change anything..

5th sum mother board software wont show exact temp..He recomended me to use real termometer to check the temp..

Final Answer My PC dun have any problem with the temperature...Hehehehe..Now oni happy... rclxms.gif  rclxms.gif He said my Idle speed is ok..Its abit hot couse my P4 is 1MB caching..He said dun worry its ok.. biggrin.gif  tongue.gif  tongue.gif  biggrin.gif  biggrin.gif
*
Guess what, my Pentium 4 530 3GHz, on 1MB L2 Cache, LGA775, is only 38celcius by using the older Thermalright XP120 with the Vantec Spectrum UV led fan [120MM] rclxms.gif

The thing is, your motherboard, it's abit, it's normal because abit motherboard always report the temperature of the processor higher than any other board...

That's all... wink.gif

So i think there's no problem...

Anyway, have u rewired the cables inside your case? blink.gif
akash
post Sep 16 2006, 08:31 PM

AK Da BEAR
******
Senior Member
1,368 posts

Joined: Oct 2004
From: Mandalorian
QUOTE(sHawTY @ Sep 16 2006, 05:44 PM)
Guess what, my Pentium 4 530 3GHz, on 1MB L2 Cache, LGA775, is only 38celcius by using the older Thermalright XP120 with the Vantec Spectrum UV led fan [120MM] rclxms.gif

The thing is, your motherboard, it's abit, it's normal because abit motherboard always report the temperature of the processor higher than any other board...

That's all... wink.gif

So i think there's no problem...

Anyway, have u rewired the cables inside your case? blink.gif
*
Oww Cool..The thing is my Artic Freezer's fan is slow thats y its temp abit high..I asked him if i mode my fan and do cable management will it be ok..He said yes...

Emm...But the thing is..I am dam dam bz..this is my final year...So no time to relax and open my pc..got lotzz of assigment to do...

Maybe next year will mod the fan or change to TT Ninja...Hehehe.. flex.gif flex.gif
mADmAN
post Sep 17 2006, 04:25 PM

10k Club
********
All Stars
10,530 posts

Joined: Nov 2004
From: Petaling Jaya & Mid Valley
hey guys.... gimme some ideas on what to do with this heatsink from my colorful 9550 which i fried. its a heatpipe heatsink.. take note of the mountings as well..using screws

heres a pic of the front (GPU core) (the fan is DEAD by the way)
user posted image

as u can see theres a heatpip which goes back to the card to this heatsink

user posted image

was thinking of using it to replace my NB heatsink but worries about mounting and clearance issues since i already have a 6800 with a zalman cooler on it....

heres a pic of the of the entire rig including the NB and GC cooler...notice how the GC cooler overlaps the NB heatsink
user posted image

any ideas on what i can use the heatsink for??? the thing has been lying around for over half a year doing nothing... so wanna find a use for it
raymond5105
post Sep 17 2006, 09:22 PM

Newbie
*******
Senior Member
5,341 posts

Joined: Jan 2003
Is there any recommendation to blow into the CPU heatzink fan? I am using TT101 heatzink but with the Delta 12cm casing fan on it.The max roration for the fan is just around 1500rpm that is pretty low for me.Can someone suggest me a 12cm fan which can rotate at 2500-3000 rpm?
TSsHawTY
post Sep 17 2006, 10:05 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
QUOTE(raymond5105 @ Sep 17 2006, 09:22 PM)
Is there any recommendation to blow into the CPU heatzink fan? I am using TT101 heatzink but with the Delta 12cm casing fan on it.The max roration for the fan is just around 1500rpm that is pretty low for me.Can someone suggest me a 12cm fan which can rotate at 2500-3000 rpm?
*
Nidec Beta 5 is good... rclxms.gif

Above 2500RPm offcourse... wink.gif

The lowest CFM for that fan is 130CFm...

But beware about it's noise... bruce.gif

It's 47DB... sweat.gif
raymond5105
post Sep 17 2006, 10:30 PM

Newbie
*******
Senior Member
5,341 posts

Joined: Jan 2003
QUOTE(sHawTY @ Sep 17 2006, 10:05 PM)
Nidec Beta 5 is good... rclxms.gif

Above 2500RPm offcourse... wink.gif

The lowest CFM for that fan is 130CFm...

But beware about it's noise... bruce.gif

It's 47DB... sweat.gif
*
Really ah?47dB is quite noisy i think.
What is 130CFm ?I don't understand.Noob here. If a 2000rpm 12cm fan do you think is enough for the cpu cooling? wink.gif
TSsHawTY
post Sep 17 2006, 10:32 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
QUOTE(raymond5105 @ Sep 17 2006, 10:30 PM)
Really ah?47dB is quite noisy i think.
What is 130CFm ?I don't understand.Noob here. If a 2000rpm 12cm fan do you think is enough for the cpu cooling? wink.gif
*
Mind to state the heatsink u're using? blink.gif

It also depends on the heatsink itself... icon_rolleyes.gif
raymond5105
post Sep 17 2006, 10:39 PM

Newbie
*******
Senior Member
5,341 posts

Joined: Jan 2003
QUOTE(sHawTY @ Sep 17 2006, 10:32 PM)
Mind to state the heatsink u're using? blink.gif

It also depends on the heatsink itself... icon_rolleyes.gif
*
I am using the TT 101 heatpipe.This afternoon i was still stick on my AI7 mobo on,the CPU max reading is about 63 degree celcius.Then the PWM area goes high until 70degree celcius. sweat.gif

Then just now i changed to IC7-G mobo,the PWM area is about 40+ degree celcius on load.CPU can goes up to 67 degree celcius.Really scary...I have re-applied the thermal paste on it one. wink.gif
TSsHawTY
post Sep 17 2006, 11:06 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
QUOTE(raymond5105 @ Sep 17 2006, 10:39 PM)
I am using the TT 101 heatpipe.This afternoon i was still stick on my AI7 mobo on,the CPU max reading is about 63 degree celcius.Then the PWM area goes high until 70degree celcius. sweat.gif

Then just now i changed to IC7-G mobo,the PWM area is about 40+ degree celcius on load.CPU can goes up to 67 degree celcius.Really scary...I have re-applied the thermal paste on it one. wink.gif
*
That's normal for abit board to report high temperature reading than any other boards... icon_rolleyes.gif

It's done because abit wants their customer to really take care of their pc... laugh.gif
raymond5105
post Sep 17 2006, 11:15 PM

Newbie
*******
Senior Member
5,341 posts

Joined: Jan 2003
QUOTE(sHawTY @ Sep 17 2006, 11:06 PM)
That's normal for abit board to report high temperature reading than any other boards... icon_rolleyes.gif

It's done because abit wants their customer to really take care of their pc...  laugh.gif
*
The reading up to 68 degree then it will hanged then restart already.Like that i cannot play Battlefield and CS liao.... doh.gif cry.gif Is it ok that i set the temperature to restart or shut down higher?
TSsHawTY
post Sep 17 2006, 11:17 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
QUOTE(raymond5105 @ Sep 17 2006, 11:15 PM)
The reading up to 68 degree  then it will hanged then restart already.Like that i cannot play Battlefield and CS liao.... doh.gif  cry.gif  Is it ok that i set the temperature to restart or shut down higher?
*
That's quite high u know...

Anyway...
Can give a picture of the heatsink u're using now? flex.gif

Don't know the real performance of that heatsink... sweat.gif

Or, why don't u change into a better heatsink? thumbup.gif
raymond5105
post Sep 17 2006, 11:27 PM

Newbie
*******
Senior Member
5,341 posts

Joined: Jan 2003
QUOTE(sHawTY @ Sep 17 2006, 11:17 PM)
That's quite high u know...

Anyway...
Can give a picture of the heatsink u're using now? flex.gif

Don't know the real performance of that heatsink... sweat.gif

Or, why don't u change into a better heatsink? thumbup.gif
*
TT 101 heatpipe is not good enough? shocking.gif
TSsHawTY
post Sep 17 2006, 11:29 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
QUOTE(raymond5105 @ Sep 17 2006, 11:27 PM)
TT 101 heatpipe is not good enough? shocking.gif
*
I didn't say that it's not good... laugh.gif
Just wondering...

Give us some picture of the heatsink... rclxms.gif

Wait, no worries, i'll just look for that heatsink in that thermaltake website... rclxms.gif

This post has been edited by sHawTY: Sep 17 2006, 11:29 PM
raymond5105
post Sep 17 2006, 11:34 PM

Newbie
*******
Senior Member
5,341 posts

Joined: Jan 2003
QUOTE(sHawTY @ Sep 17 2006, 11:29 PM)
I didn't say that it's not good... laugh.gif
Just wondering...

Give us some picture of the heatsink... rclxms.gif

Wait, no worries, i'll just look for that heatsink in that thermaltake website... rclxms.gif
*
http://www.thermaltake.com/product/Cooler/...t_478_more.html
THis is the link which u can see it.
TSsHawTY
post Sep 17 2006, 11:43 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
Hurm...
By the look of the heatsink, it doesn't seem so promising... sweat.gif

user posted image

It's too copperie... tongue.gif

Plus, it's too small la raymond... laugh.gif

If you ask me, that heatsink doesn't work so well by the looks of it...

My advise is to change into a bigger surface heatsink... rclxms.gif

To my own opinion, XP120 should be good for your damn hot processor... laugh.gif

**I didn't trust copper... tongue.gif

This post has been edited by sHawTY: Sep 17 2006, 11:45 PM
raymond5105
post Sep 18 2006, 12:21 AM

Newbie
*******
Senior Member
5,341 posts

Joined: Jan 2003
QUOTE(sHawTY @ Sep 17 2006, 11:43 PM)
Hurm...
By the look of the heatsink, it doesn't seem so promising... sweat.gif

user posted image

It's too copperie... tongue.gif

Plus, it's too small la raymond... laugh.gif

If you ask me, that heatsink doesn't work so well by the looks of it...

My advise is to change into a bigger surface heatsink... rclxms.gif

To my own opinion, XP120 should be good for your damn hot processor... laugh.gif

**I didn't trust copper... tongue.gif
*
Oh,XP120 kah?Dunno bulk order got ppl selling or not.Will check tomolo. sad.gif I thought this copper cooler is good man.So your advice is directly go to XP120 instead of going for higher RPM 12cm fan ?
mADmAN
post Sep 18 2006, 12:26 AM

10k Club
********
All Stars
10,530 posts

Joined: Nov 2004
From: Petaling Jaya & Mid Valley
by right copper should work better... but then its a TT product sweat.gif

anyway.. care to give the specs of ur fan? i think a 60+cfm fan should be alright...

and anyone has any suggestions for the heatsink ive posted above?
TSsHawTY
post Sep 18 2006, 12:47 AM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005
QUOTE(raymond5105 @ Sep 18 2006, 12:21 AM)
Oh,XP120 kah?Dunno bulk order got ppl selling or not.Will check tomolo. sad.gif  I thought this copper cooler is good man.So your advice is directly go to XP120 instead of going for higher RPM 12cm fan ?
*
The problem is, there is no more bulk sales for XP120 heatsinks... laugh.gif

And to add, yes, copper is good, but your heatsink, it's "Themaltake... sweat.gif "

Just like madman says up there... laugh.gif

QUOTE(mADmAN @ Sep 18 2006, 12:26 AM)
by right copper should work better... but then its a TT product sweat.gif

anyway.. care to give the specs of ur fan? i think a 60+cfm fan should be alright...

and anyone has any suggestions for the heatsink ive posted above?
*
Yerp, Thermaltake... sweat.gif

Erm, your heatsink aa?

Dunno laa... laugh.gif

Maybe u could mod it to be your northbridge chipset heatsink... laugh.gif

Ask shah81, he'll know what to do... wink.gif
He's a crazy modder like we all know... laugh.gif
mADmAN
post Sep 18 2006, 01:08 AM

10k Club
********
All Stars
10,530 posts

Joined: Nov 2004
From: Petaling Jaya & Mid Valley
not just that la...i dont really wanna mod it as i wanna fully utilize the heatpipe.. and also the HUGE heatsink on the back of the card...

right now the only idea i have is to put it on top of muh HDD so that it can cool that down....but im gonna be adding another HDD on the top bay so dunno can fit or not

EDIT: copper is good but requires a high CFM fan to really shine... just like the XP90C.

i suggest getting a more powerful fan first. as its cheaper than immediately upgrading the heatisnk... if it doesnt work... then upgrade heatsink ad use the new fan with it thumbup.gif

This post has been edited by mADmAN: Sep 18 2006, 01:10 AM
« Next Oldest · Cooling and Hard-modding · Next Newest »
 

120 Pages « < 25 26 27 28 29 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0271sec    0.38    6 queries    GZIP Disabled
Time is now: 8th December 2025 - 04:50 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.