This post has been edited by eddie2020: Aug 26 2013, 08:14 PM

you guys EO what level usually? i at middle

not sure, petrol light came out i drive 5km only.. then reach station

hi all, is there simple way for us to adjust our handbrake?
aq punye handbrake dah tak makan la....

btw, my FC for 134km cost me RM50.. mahal tak? use for 2 week go work but kinda near.. that day go highway travel rm50 can go around 400km.. manual transmission.. gen 2 1st batch with 4-2-1

manual?

my work place is 3km and average perday go and back 6-7km... 7km x 10day = 70km + pergi keluar jalan those around 13xkm for 2 week.. rm50 minyak.. lol donno izzit kl jam or i not good in controlling my manual..
i from kuantan come kl use around 400km per rm 50


btw, got ppl know adjust handbrake or hantar kedai 1?

itu 100% highway, sekarang 134km , rm50.. ok ker? lol

tak de trottle la, jalan biasa jer 2- 2.5rpm..
gi kerja 3km lebih kurang, gear pon masuk 1 2 3 jer byk, kadang kadang 4 - 5..
kete lambat kat sini.. tak leh byk laju

jalan bandar, kat pj..
dulu masa jln high way leh gi 400km..
sekarang jalan bandar 134km.. aduh..

korang highway fc ngan city fc braper?

korang city drive braper fc? highway braper plak

cwap cermin kot, kalo hometown aku ada kenal kwn, kasi skit kopi beres.. lol
hometown kwn aku lagi best, gi situ tak yah cabut, masuk jpj buat bodoh ckp dah koyak, jpj tak gi check pun.

town tak der jam? area mana ?
highway sama.. tapi town beza ngan ko byk besar.. lol double tu

show gambar skit hahaha

kete, nak gambar ko leh gak, aku bagi ahcik

i root over 100 times with my own n friend samsung and bro all that tarak brick pun.. mesti u tak follow instruction / root salah file version.. lol atau pun ko terlalu bad luck lol

i got some prob, when my engine cold, i change gear tekan clutch masuk, my oil will rev abit and rpm go up little as i already release my oil pedal, is it carb prob or? or is like that cos my engine sejuk lagi

lol, got screw this thing 1 ? i thought ady welding mati with the chasis 1..

help me see mine, mine should be the 'drain nut' rite? how much u did that? can gv me the location?
not all shop provide the drain nut thinggy? lol

1 biji only wor? my picture there show only 1 biji.. lol if rethred 2 biji can buy new 1 rm68

oooo.. i thought cant replace... those hinges can be found at where? online buy macam need wait.. hmmm..rear upper door trim how remove i also donno haha... need ask my bro see he know or not..

what is the p/n left and right ?

is there the nut thingy to put it back inside? without replacing whole hinge? cause only the 1 biji i think is something like nut.. donno it got sell or not. rear upper door trim is remove from inside the car? sorry noob here DL==

haha, use cable ah? i not sure the hole easy to take out or not.. or the nut actually no hole there... i scare buuka bonet kenot close back then i die.. lol.. cause when i close i use alot energy due to the bonet spring.. and the bonet senget when i close..

seems like less shop which sell this thingy, only found 1 ppl selling in lelong.. donno need go which type of shop to find this thing.. the back side i think easy pasang.. but the bonet on mirror there i think not easy, the spring can cabut? i think need cabut the spring also

This post has been edited by eddie2020: Nov 11 2013, 04:34 PM

i see, mine dint have any leaking afaik.. only inside bonet sometimes little water, donno where it come from..
donno it balance or not balance, will see it , but i feel its even and dont have deep inside or up above.. because my back i dont have the proton logo cz previous owner changed before.. the bonet balance is depend on hinge rite?
i know 1 of my hinger rosak my bonet open close also not balance.. i know when i drive corner much and tekan minyak release clutch got kiookkzziziiii like this, then press more pedal on fuel no already.. donno outside sound or what..

what is p/n ? you buy 1 side how much? i scare i buy 1 side den not match the otherside later tak balance.. or sure same 1?
i saw rm60 nearby my area 8km from my hse, but donno is 1 pair or 1 side

edit:its 1 side

This post has been edited by eddie2020: Nov 12 2013, 02:14 PM

i scare the new one size not same exactly as the original one.. lol i asked my bro help me order.. i told him rightside.... but i donno the right side is view from behind of the car or front of the car.. driver seat is right side so the stuff should be in right side rite, cz my driverside rosak.. u change how long ago ?

this exactly same as my prob... this only happen if the striker adjusted lowest? ytd back from work i go observe my back bonet... both side zun zun very even.. but when i open bonet, need open many time with the latch... or 2 ppl... i found out new idea, i got cloth in my driver seat, whenever i wan open, i pull the latch and i put in on hold by putting my cloth in between the fuel pump and the latch bonnet 1.. then i walk go behind and open my bonnet i wonder if i put the striker upper izzit i can open easily, but donno will water leak and uneven or not..

mine is diy by previous owner, got 1 whole carpet cover my roof headliner.. but i donno got water drip or not.. hw to detect it??

see drillsss... haha mine i think is kain... feel like carpet... not bad.. haha..

i jz realize need pay 1 for the klims2013 entry??i thought . . free